Hey guys and welcome to start of Week 8! 🌻 Today is day 21 of flower so i went ahead and cut most of the plats Fanleaves off. It took a while but now the Airmovement is improved and the humidity should also be lower. I also hope I didn‘t stress them too much. From now on they will be reseaving less and less Nitrogen going forward. I hope the colours come through as well 🤞🏻 Thanks for following along and I will keep updating the progress. Happy growing 🍀

Das Topping hat sie sehr gut vertragen. Ich hab ihr eine kleine Erholungsphase gegönnt, bevor ich sie dann in den Endtopf umgetopft habe. Auch hier lasse ich ihr ein paar Tage um in ihrem neuen Zuhause anzukommen, um sie dann in ein paar Tagen nochmals zu toppen und mit dem ersten LST zu starten.

4/22/2024 Day 29 showing plenty pistils, still in the transition to flower stage. Training may help the plant grow bigger/ longer stems. They can be semi bushy when spread out. Switched nutes to flower bloom from Gaia green 4/26 day 33? Last half of week 5 there has been more of a stretch than there was previous to this. These plants have been mad with a bit of over water and chlorine issues and maybe cal mag 4/27 day 34 end of week 5 The plants both stretched. The one I didn’t train,I can see a visible growth of about double the height, just over this last week. For it being just a pre flower stretch/transition phase for the auto flowers, I am surprised at how many pistils are on the flower sights. The end of last week, I didn’t feel like there were enough pistils to consider it the beginning of flower, and now at the end of this week, it looks like this should be the end of week 1 flower, but they were still stretching.

finally have some time for my plants. i will upload some photos and videos this week! ------------- updated again i spotted male flower on one of the branches removed it immediately (it was immature), after removal i peeled it in other room with gloves and was sure it was 100% male flower because it was not like calyx inside. its the 2nd time i find male flower on plant number 1, very strange i never saw plant only popping one random male flower. i thought plant would just be hermie and it would have a lot of male flowers. the plant is 100% female but popped random male flower again. It is late flower of this strain and i think i can handle this problem and finish that plant. Any expert ideas? any of readers encountered this problem? p.s. sorry for bad english, it is not my native.

I’ll be most definitely harvesting these next week! I will continue with water from now until they are ripe and ready! They are absolutely smelling like a sweet shop! Like I dipped my head in a pic and mix bucket, like Im wreck it Ralph and I’ve crashed into candyland! Makes my mouth dribble! The buds are starting to swell too so thinking next 7 days I’ll be ready! Next upload will be harvest hope you like buddies! I’ll be hang drying this time! As I’ll have space and a tent to do it in as before I didn’t and used the brown bag method! But I can maintain between 14c - 18c with a humidity of 42 percent! So I’ll hang dry this time! Any suggestions?? Let me know! I’ll be putting 2 fans on them for air circulation and a air vent only sucking out as it will draw air in on its own and keep the humidity lower in the tent while drying!

Sono felicissimo,abituato alle hps e cmh e non riuscivo ad ottenere grandi risultati, con una hps 600 watt massimo 450 grammi,con un led 730 ho fatto 1500 grammi,waooo😍😍😍

Ya ya baby these things are monsters!! Bent a few over they were asking for it LOL

This was the most beautiful grow I have done to date. There were a few mistakes I made along the way, like not defoliating enough and some over topping but I still highly impressed with the results. Looking forward to growing this again.

Na

Su alimentación basada en la línea completa de Quemanta Nutrientes, nos otorgó grandísimos resutados, cosechando la primera planta con 80% de sus tricomas tonos lechosos.

This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)

Skunk apple runtz a random cross made by me. It's starting to root well. I can see it's roots coming out the bottom the pot already and there thick roots. The leaves on this plant have took a little stress the past week from the rh being off. It seems to like being topped it's pushing out new growth quite strong. This past week all the plants did great dealing with getting repotted and topped in the same week. I definitely took a Rick doing that seeing i only left each plant with 4 leaves. This past week was also a struggle to keep the vpd in a decent range. The Temps outside have been below 32 for a few days with Temps dipping down to almost 0 at night. With the space heater running it's pulling the humidity down. I think I have figured out the solution to that problem so I won't run into that next time it gets cold again. All the plants have really started to grow their new branches sense being topped. A few of the plants are a little smaller than I'd like but I'm gonna keep em alive for now.

All 3 sour Jealosy looking good and healthy, I Noticed 1 seedling only had 1 first leaf come through but seems to have kicked on despite this. I have now moved the seedlings into a 3x3 tent with a 650w philzon LED light Just until late veg early flower then they are going back under the Spider Farmer for the Full MOT and Output lol Humidity has been easy to deal with luckily . I have been spraying around the solo cups and near the stem with plain water to keep it moist and Humid. Seem to be loving it so far 👌 Next step is wait til these are reaching edge of solo cup and transplant into bigger pots. Germination was a success 🙌 Party time now ❤️👌 l

Plant was transplanted in to 5.5 L pot.

Un altra settimana è passata senza problemi...grazie alla mia perseveranza nel curarla e debellare i ragnetti Rossi che bastardelli mi sono arrivati anche dentro al box... sicuramente c'è li ho portati io involontariamente quando sono andato a vedere delle piante di un amico che erano impregnate di ragnetti e ragnatele sui fiori....vabbè ora devo sbattermi un po' più ma non lascerò che mi rovinino la mia terapia 💪👍🙏🕉️🙏... Boom Shiva Shankar 🕉️ belle le mie coccinelle 🐞 che mi tengono pulita la mia terapia

🌱 Day 50 - First Day of Week 8 🌱 Hello, Grow Friends! My plant is doing well, and it’s amazing to see visible progress every few hours. 🌱✨ The buds are in full throttle, and I feel like the plant is now needing more water as the pots are drying out faster. 💧 Watering: I’m still watering with 1L every two days. 💦 The dosage of BioBizz Grow and BioBizz Bloom has been increased according to the BioBizz feeding schedule. The pH of the water remains constant at 6.0. ⚖️💧 Temperature & Humidity: Luckily, the weather in Germany is cooling down, so I no longer have to deal with temperatures of up to 30°C in the tent. 🌡️🍂 I’m expecting temperatures to settle between 18-23°C now that we’re in September, and humidity should stabilize around 50-55%. This will create perfect conditions for the upcoming drying process. 🍃✨ Plant Health: The plant is looking good overall. 🌿 I did have some calcium and magnesium deficiency symptoms recently, but I’ve managed to get that under control with CalMag. 💪 I’m continuing to carefully remove any leaves that are noticeably blocking light to the buds and hindering photosynthesis. 🍃✂️ Vibes: Every day, my plant still enjoys an hour of Lo-fi Jazz music. 🎶🌱 I think it helps set the perfect growing atmosphere. 🎷 🌱 Day 56 - Last Day of Week 8 🌱 Final Feeding: Today marks the last day of the fourth flowering week and the last day I’ll be feeding the plant. 🌿💧 From now on, the plant will receive only water for the final 14 days to flush out the remaining nutrients from the soil. 🚿 As a beginner, I’m unsure if two weeks without nutrients will be enough for the plant to finish properly. There’s a part of me that worries about potentially wasting its full potential by skipping nutrient periods. 🤔🌱 However, I’ve decided to stick with the plan—after 14 days of just water, I’ll harvest the plant. ✂️🍃 Humidity & Temperature: This week, the weather has cooled down significantly, and I no longer have to struggle with high temperatures. 🌡️🍂 The temperature ranges from 19-23°C during the day, and humidity sits between 49-56%. I think these are ideal conditions to bring out the purple hues in the buds. 🍇✨ Defoliation & Plant Care: I’ve finished the final defoliation and trimming of the plant this week. 🍃✂️ From now until harvest, I’ll avoid making any more changes or interventions, as I want to keep the plant stress-free and allow the bud production to progress smoothly. 🌱💪 Trichome Observation: As a beginner, I’ve started checking the trichomes this week, but I’m finding it challenging to distinguish between clear and milky trichomes. 🔍💎 I plan to harvest when I see 90% milky and 10% amber trichomes. 🌿✨ I’ll keep you all updated next week, and don’t forget—there are new pictures every day! 📸🌱

Week 2 Flower Both twins are looking very healthy, and are now showing clear differences in their structures after 2 weeks flower. Twin1 has beautiful big leaves and is becoming the taller girl, but she still has a nice strong structure with thick stems. Twin2 has slowed down her stretch more than her sister, and has shorter node spacing too. With that being the case they both have their own pro's going into week 3. Either one could still be the winner, there's a long way to go yet! They were both given another leaf strip and a slightly higher lollipop later in the week to slow their stretch down, and increase light penetration. Their base nutrients will be changed towards the bloom ratio now they're slowing their stretch and producing calyxs. Thanks for following and happy growing! 🐺

This was a fun plant to grow. The trichome production was amazing and the last couple weeks she really packed on the weight. The trichomes changed from clear to milky to amber a lot quicker than I anticipated. However I had started my flush 2 weeks prior so everything seems to be top notch. I water cured a small amount and the high is GREAT!