The buds smell like candy, it's a first for me with this strain and although the plant is short it seems like the buds will be of good size and quality.

Flushed because of nutrition burn, now feeding plain water 🚿

Eccoci qui... Tutto va per il meglio, questa settimana ho eseguito Lollipopping e Defoliation per far si che le cime principali sprigionino al meglio il loro vigore. Siamo verso la fine del progetto ora bisogna solo aspettare la fine... Grazie a tutti per il supporto🔥🌲❤️

******************************************** Week 16 Fade (week 10 flower) ******************************************** Light cycle=12/12 Light Power=120w 50% Extractor controller settings (during lights on). High temp= 25c Temp step=0c High Rh= 50% Rh step=0% Speed max=10 Speed min=5 Extractor controller settings (during lights off). High temp= 21c Temp step=0c High Rh= 55% Rh step=0% Speed max=10 Speed min=5 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -22.c Radiator off=+22.5c Top fan on= Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-19.0c Radiator off=+19.5c Top fan on VPD aim=1.0-1.4 DLI aim=30-40 EC aim=0.2-0.8 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 0-0-0 Method= Automatic Feed=Finishing nutes. Neutralise=0.1ml/L Flawless Finish=2ml/L Easy Ph down=0.02ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0ml/L (1ml=24 drops, each drop is 0.04ml) Ec=0.34 PH=6.1/6.0 Runs=18 Run times=4mins (L/L each) Gap times=16 mins Total runtime=72mins(L/L each) Total flowrate= ml/min(ml/min each) Auto start time=10.00am Auto stop time=15.44pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅19/1/25 Sunday (Day 106)(flower day 66) 📋 💧 Automatic finishing nutes Ph down=0.01ml/L, 2 drops Ec=0.3 PH=6.4/6.3 Volume=8.0L Volume left=2.5L Volume used=5.5L(90ml/min) Volume each=5.5L(90ml/min) Runoff. Total runoff=0.8L Ec=1.9 PH=/6.7 💧 📅20/1/25 Monday (Day 107)(flower day 67) 📋 Tops are ready, lowers not far off. Going to decide if im just going to harvest the tops and let the lowers mature a bit more, I'll check again in a few days and make the decision. 📅21/1/25 Tuesday (Day 108)(flower day 68) 📋 📅22/1/25 Wednesday (Day 109)(flower day 69) 📋 💧 Automatic Water (Neutralise) Easy Ph down= 0.01ml/L (2 drop total) Ec=0.15 PH=6.4/6.4 Volume=8L Volume left=2.75L Volume used=5.25L(90ml/min) Volume each=5.25L(90ml/min) Runoff. Total runoff=1.3L Ec=1.3 PH=/6.8 💧 📅23/1/25 Thursday (Day 110)(flower day 70) 📋 Small defoliation 📅24/1/25 Friday (Day 111)(flower day 71) 📋 📅25/1/25 Saturday (Day 112)(flower day 72) 📋 That's it for miss Zoap, she has matured as much as I want so she has got the chop today. ******************************************** Weekly roundup. 📋 She has bulked up enough now. Shame I can't get more light to lower parts of the plant. Back soon. Take it easy. ********************************************

So this is the start of the fourth week with me. I find this very engulfing. I like spending an hour with them a day and move the little ones out of the bigger fan leaves shadow by tucking the larger ones away giving the little ones a chance to get more light and flourish. I’m noticing more the strain my one girl went through compared to the others, her leaves being smaller than the other girls. I’ve tried to give them the best environment I can and realize I still play a huge role in their life. This is my first grow and I love it. I hope they grow up well and flourish. They were fed last week and had a bit of nutrient burn so this week I gave them just water. I’m not sure how much longer I should veg but I hear in the scrog game the longer you veg the better. Hoping for the best for everyone on GrowDiaries and their grows!

Day 56, taller tent I ordered off Amazon is stuck in transit, tops are really starting to turn yellow even with lights at half power(red only), no bud bleaching yet, lower PAR full spectrum cobs should be here tomorrow so ill keep those on her til harvest! Very hardey plant, beautiful purple/violet, with a wonderful fruit diesel gas scent with chocolate undertones

6/21/22-Presoak 24hrs 6/22/22-Damp Paper towel 24hrs 6/23/22-Popped and placed into medium.. watered with 2oz+- water 6/25/22-Germination!!

Leckere Zitronische Sorte! Kann leicht Übergossen werden sonst sehr einfach für den Anbau Guter erster Grow! Kleine Fehler waren dabei: -Übergossen -Zu spät in die Blüte geschickt daher über Lampe hinaus gewachsen -Trauermücken Befall am Ende der Blüte - Sehr fluffige Blüten durch die Fehler Aber sonst extrem leckerer und intersive Sorte echt zu empfehlen 👍🏻🍍☣️

Day 6 - defoliation of tainted leaves and LST training

week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

Good first week, plants have been growing well. When mixing up the ingredients and pouring them into the sprayer, I noticed they made a stream or vapour, wondered if that will cause any issues with the plants or what it was. All the seeds have sprouted as well so happy about that. This is a combo of week 1 and 2

Strain: Divine Seeds – AK47 XL Grow Type: Indoor Pot Size: 7 Gallon Medium: Peat Moss & Perlite Nutrient Line: Athena (Bloom) Week 5 Update She’s doing great this week getting a little taller and showing steady progress as she settles into flower. She’s taking her nutrients well with little to no deficiencies, just a slight yellowing on the tips, but nothing too concerning at the moment. It’s week two of flower, and everything looks fine so far. Hoping to see more pistil coverage and early bud development as the week goes on. Feeding 1.7 L Athena Bloom nutrient mix (will raise gradually if needed). Indoor Climate Conditions Temperature: 18–23°C Humidity: 60–65% VPD: ~0.5–0.8 kPa See y’all next week!

Good training going on... Real excited about the growth that's happening... It's going great!!!!

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies growing well, and healthy, not yet in pot, I prefer wait harvest of other girls, to down the light and avoid burning. We'll start grow nutes next week in in pot. 💧 Give water 2x per day, keep soil wet with vaporisator. Water + Rhizo PH @6 💡Mars Hydro - FC 3000 50% Not yet under Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering

Day 79 11/28/2021- Welcome to week four of flower. Today fed nutrients and did a defoliation to take off the smaller buds that won’t get enough light. Day 81 11/30/2021- Just water her today. Day 82 12/01/2021- Trying something new. Day 83 12/02/2021- Water day for them. Also camera needed update but made it work. IOS/ANDRIOD PAR METER APP. It is very accurate highly recommended this for everyone. https://apps.apple.com/us/app/photone-grow-light-meter/id1450079523 Day 84 12/03/2021- Last day of the week, and Wow the grow is amazing!

Last week before the flush

The plants are in the 2nd week of flower and the pistols are staring to show it. That confirms that all of the plants are female.

Here we are week 6 of veg and about 10 days from flipping to flower just want to give her some time to recoup and fill in more then we flip and watch the stretch.. shout out to Zamnesia Seeds for the opportunity to grow this strain.. hope all is well and Merry Christmas to all!! God bless 🙌.. Plant dimensions are.. 24inx23in .. she's gonna be a tight squeeze in my flower tent, which is 27x27x63 and i look forward to filling that tent completely.. happy about this one.Good luck to all and happy growing ✌️ https://www.zamnesia.com/us/35-cannabis-seeds/368-zamnesia-seeds

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......