This strain absolutely took off! The plant I super cropped is absolutely covered in trichomes. One plant matured a little quicker and yielded 2 ounces!

Grow very fast!

Fantastic growth again the past week , the PE is chunking up incredibly , she’s become sticky to touch and smells like Pepe Le Pew gone troppo , shes the smaller of the two and will likely finish a few weeks before her gorilla Zkittles room mate . The GS is going to be a monster, that triploid mutation is something to behold in terms of how big this girl is . Not only is she big but she’s beautiful, frosty already, sticky and an amazing fruity aroma . These girls have had a blessed life so far with zero set backs , I had to put a few yellow sticky things in the pots as we ended up with a few of those little flies . I’d obviously over watered a bit when I transitioned from 48hr feeds to 24hour but I think I’ve sorted out where I need to be moving forward. Check out the vid if you have time , it really shows just how much bud there is on these two .

10 dernier jours.

Nice looking bud frosty as , around 3 weeks till harvest

Awe strain, very productive, strong, and i’m In love with this terps🤪🤤🤤🤤

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Howdy! I have premixed 1L worth of PH adjusted nutrient solution which I am periodically syringing on top of the rock wool when it starts to get dry. I see some people only use RO water with cal-mag to start them off, but through my own unscientific opinion I figured 550 PPM won’t hurt considering seeds grow in soil and that isn’t exactly nutrient free! I am using RO water which I will keep in a 70 litre bucket ready for the DWC system once it is up and running. RO system was only £50/$80/€60 from the internet and it’s getting my hard water down to 0-1PPM from 450PPM. Growing my ladies in a smallish tent, 60 x 120cm which is 180cm high. Using one 315w LEC/CMH for the first two weeks, and then adding another 315w after week two. Using 4200k bulbs for veg, 3200k bulbs for bloom. Will take more pictures of the set up in the next week or so once the babies are in the 70 litre DWC Bubble System. Planning on buying Silica Blast to compliment nutrients in the next week or so. Ps, I believe this is the first DWC grow diary for Strawberry Lemonade, hopefully my mistakes and successes over coming weeks will help anyone who reads this! 🌱

2x Plants with liqui cannabiz doing very - ghe tri 2x coming along (adjusted their nutes) lets hope for the ge best..ill be doing some fimming through out he week.. Hopefully side branches eill catchup during stretch period.. Looks like 2 showing signs of flowering.. Hectic week ahead @ work - will try my best not 2 f&#k things up..sofar so good.. Had some issues with LC buckets - looks like ektra NSol solving the issue.. Lets see changing all nutes 2morrow

Here’s my try at lemon pie from Fastbuds, of the 3 beans I got 1 displayed traits of ruderalis is her fan leaves and stretched to 4 ft tall. The bud structure is a little fluffy but smells great and is a good stone. I would cultivate it again and I would recommend a scrog and not to put them too close together.

Spumoni (Alien Labs Dosidos x Sunset Sherbert), increíble planta como producto final. Una de las mejores de este grow. Terpenos que no se pueden describir. Un placer para cualquier sibaritas que busca algo especial y exótico!

Gute Woche für die Photos, durchwachsen für die Autos. Die ak haben wieder eine Blattläuse Attacke erlebt. Habe die lästigen Dinger wieder manuell entfernt.Es läuft. Bis nächste Woche ✌️

Bueno entramos en semana 3 de flora... pasaremos usar pl booster y esperemos poder pasar led antes que acabe esté cultivo. El calor lo hace insoportable para las plantas están bastante resentidas a ver que tal sale! Salut y força al canut farmers!🔥

Everything seems fine slight bit of defoliation.. temperature gone up and humidity come down Ec testing the feed at 1.5 atm one feed then 1 water And they loving it 👌 if there’s anything I can do to improve let me know would be helpful

Week 11 All is under control: plants are growing correctly, healthy, deep green… perfect size, a few weeks before flowering cycle; I did a second topping week 10 on everyone (+6 nodes): I would have a maximum size around 150 cm for discretion and space. Still Aphids problem on the Royal Moby and I treated leaves by hand with Soap…making a mistake: too late in the morning so the sun burned some leaves. This insects are still there but the infestation is contained for the moment. I sprayed Neem oil on all plants. Added more soil in each pot : 1.5/2L of humus worm + guano bat. I observed a sort of burn on lhe extremity of leaves: possibly a sign of nitrogen excess. I stopped nutrients for a while, adding just enzyme and Alga Mic. Watering around 1.25L/2 days Daylight 15h30 - 6h25/21h55 Sunny days, cloudy sometimes, windy (NNE) T°= 13ºC N / 21°C D Humidity 67%

She is almost done! I am flushing her out for 2 weeks. She is such a gorgeous plant. She produced some nice buds. This is one of the stickiest plants I have ever grown. She was really easy to grow and never gave me any problems during the grow process.

I didn't like the speed at which the flowers were produced. I think 4,5 liters of soil is after all too little to get the result I was hoping for organically. So this week I started giving some canna terra flores. I started with 0,7 EC and gradually increased it to now 1,3. For now it seems the plant is taking it very well. Today I'll be doing some defoliation because it's getting kinda crowded in the middle of the plant.

Quick flipping this week! All systems go 🚀!! Did some LST to spread out canopy. One of my Yacht Party clones wants to be a runt but I’m sure this will change after 1st week flower, otherwise everything else is growing uniformly! Lookin forward to changing the schedule after our last cold snap passes in my area.