The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Using 7.6 pH well water creates challenges in keeping iron, nitrogen, and phosphorus available to the plants. This soil is recycled and had a starting pH of 7.3-7.5. I added Diamond Brand Ferrous Sulfate at the above listed rate of 2.5 ml/gallon of soil. I distributed these granules evenly across the top of the soil. Adding this amendment acidifies the soil and provides a readily available and lasting iron supplement during veg. After adding the ferrous sulfate some small particles were splashed onto the leaves by the rain. These particles burnt the leaves and are the dark spots you see in the photos. Those dark spots turned into tears in the leaves as the high winds ripped through them. The girls are showing a little excessive nutrient stress. I believe from the phosphorus in the Coop Poop. I've come to believe it runs higher than the advertised 4%. The higher soil pH exasperates this. As the ferrous sulfate works and these girls grow larger these issues will be solved. Day 1 we had cooler temps, overcast skies, and showers during the morning and night. These continued early morning day 2. Followed by sunshine after noon on day 2. Early morning Day 3 at 2-3 a.m. we had thunderstorms that produced strong winds and very heavy rain for almost two hours. Day 4, despite the 5% rain forecast, we had another thunderstorm producing heavy rain and strong wind followed by rain that evening. Day 5 the plants had a respite. We had lots of sunshine and a lite breeze to dry the soaked soil out. Day 6 we had more sunshine and breezy weather. Day 7 more sunshine and excellent cannabis weather, not too hot and not too cold. I didn't water these this week as the rain was more than enough. These girls are real tuff. The weather during their germination and first two weeks after planting was brutal. The high winds and heavy rain blasted the leaves and soaked the pots. These girls bent but didn't break. They look a little beat up from the weather, pH issues, and nutrients stress. This isn't ideal but in two weeks it will be a faded memory. Fastbuds can handle harsh outdoor conditions, minor user error, and still produce lots of beautiful buds. Follow and see for yourself.

6ª Settimana di Fioritura 💐💐💐💐💐💐 Guardate che bei colori che sta buttando la MIMOSA SHOT 🌼🎇 di HERBIES SEEDS 💚😍 verde chiaro, scuro... viola/nera e peli giallo fuo 🤩🔝 Che bellaragazza💚✅😘 E buon 420 a noi growers🚜💐💓

Heeey! 👋 It's week two and everything went quite well I believe! The girls are growing and they look healthy! 💪 During the first days this week and while I was checking them I started to think how I could improve (and fix) what I did in my previous grow, specifically the veg. phase. I wasn't the brightest person in my previous grow because I left the lights at their maximum power during this phase to increase the overall heat of the tent (it was a winter where I live) and while that idea made total sense to me at that time later I found out that was a not the best idea at all 😰. By doing what I did it meant my plants were receiving way more energy they could handle and that meant the plants didn't grow as much as they could 😱😭 So, how could I improve that this time? The best way was to get a PAR meter so I could measure how much light my babies are receiving but those are expensive so the best option after was using the lux meter (or rather the RGB brightness sensor) that's available in my phone (most phones come with one) and by doing that I get a rough idea how much food my babies were receiving (in lux tho, not the best method but it helps to get an idea) 👌 The first days Pistachio and Matcha were getting about 8000 lux and as the week progressed I ended near 18000. Some websites said that amount was acceptable for young plants (they do not talk about the quality of the light tho). For the next week I plan to reach 24000 lux and stay around that 😊 I also think this week I'll move the girls to a slightly bigger pot and with each transplant I'll keep using mycorhizes (Mico Root are mycorhizes) to help the root development. Anyway, that's all for now. Thanks for reading and I hope you'll all enjoy the photos and timelapses I took (the 2nd one looks cool!) Cheers! 😃

So I was thinking that growth is quite slow in the last two weeks. Then I discovered that the roots were looking weird, and noticed fungus growing on them. So I took the roots out and you can see the problem yourself in the pictures. I removed the bottom part of the roots and I added new coco in the pots, then I placed the girls back. It's been one week now and I can see new roots coming out at the bottom of the pots. The strange thing is that the 2 plants that were healthy(completely white roots) are also having the smallest buds 😒 Btw, I also flushed them with FloraKleen and H2O2(10%, 2ml/l). Then started feeding again, but with reduced nutrients - 630ppm I also elevated the pots, so they don't touch the trays anymore and started using the dehumidifier(50% humidity). I also bought a RO system and started using RO water instead of rainwater. Damn, I hope the harvest will look decent!

*Week 4 Flower 09/24* Both Mimosa girls appear to be running fine with Mimosa (1) running a little behind but is catching up accordingly. Small oversight in early growth resulted in a minor stunt but she is improving dramatically. Water Feed has increased by half a gallon ( 1gallon clean - .5 gallon nute feed) *Week 4 Flower 09/28 - Mid week update* Both plants are flowering accordingly - Mimosa (1) is a bit taller then Mimosa (2) Buds are becoming dense and covered in trichomes. No deficiencies - No areas of concern - Potassium and Phosphate feeds continue *Week 5 Flower end of week recap - 09/30* Both Mimosa's are flowering nicely - Budsites covered in frosty trichomes. Mimosa (2) looks shorter but that is because her COLA was tied down to expose bottom budsites.

Day 92 This baby still going :P i think will reach 100 days. cant wait for it to be ready and see final weight

I had to cut away 10 molded buds this week. My ventilation was off during the night (for a week) so a few buds had to go. nothing too bad. I think she needs another 10 days to finish from here. The resin ob the buds is insane. As i cut the molded buds my fingers look like i put them in glue, very sticky resin and super strong smell. Also had to use rope to hang the heavy stems up, rockhard buds

Well this little girl is forming very much like kush buds would , very dense and thick bud with very few white pistel hairs , A very attractive bud too watch form , she is packing on bud like there is no tomorrow as you can see from the pics and drinking the pot dry every 3 days of 8 pints , the colour from this plant is truly a sight indeed and the smell she is giving off is like a mouthful of blackberry jelly and icecream back when you was a kid , i am very excited about this one and cannot wait too try her ,

Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...

Everything going strong. Baby Yoda spreading his ears. One leaf started to curl a bit. Maybe too much water? Starting nutes tomorrow. The more leaves. Wanted to start nutes but soil is too moist. Will hold off for another day. Just misting the surface. Started with Fox Farm at 1/3 dosage as my soil had organic nutes in it already. Starting slowly. Saw a gnat running around. Stopped water and misting. Put some packing tape in. Should be ok. 😁 Temperature is creeping up as I add more light. Maybe increase distance soon. Increased the light distance. Leaves were looking a little baked. Maybe too hot as well.

Two low branch broke off due to wind and stem wasnt stong enough for weight of the buds....other than that just a handful or two of defoliation every two day or so....makes trimming ez lol

May 2: Watered with a PH of 6.5, always using a bit of vinegar to PH down. Water included a pinky finger tip amount of crushed and stirred eggshells. Shells had been sitting in the water for 1.5 days. Shells did not enter the medium. Just the water they sat in. May 6/Day 26: Preflowering begins May 8/Day 28: Amended topsoil with 12 tablespoons of Gaia Green 2-8-4 and 10 tablespoons of Gaia Green 4-4-4

Final product is been absolutely amazing on these clones - the jungle came out about average but the clones definitely exceeded expectations there absolute fire in comparison but still just as good hopefully I can just improve a few issues we had on this run and dial right in 100% will be so much better, next few run is going to be special I’ve got a few things lined up. From tester packs to breeders packs I can hunt from. So lots to choose from but what to keep to run will be interesting

Sorry I missed a lot of updates. I was recovering from hand surgery then gd was not working right. She has a sweet earthy brown sugar smell. She did well for the limitrd care I could provide while I recovered. Was a good grow and I am excited to get to try her soon. Thank you Divine Seeds, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

i looked awesome all growcycle...i streched alot & i noticed it drank alot more then the other plants while growing...had a good yield, i´m very happy overall

February 28, 2019 Update: Getting close to the end here. I'm going to start flushing the Cherry Hemp plants this weekend and chop them down the following weekend. The DinaMed, Critical+ and Cream & Cheese should only be a week or two away from flush also. Feeding only MegaCrop & Cal+Mag Pro until the flush. This week I took pictures with the lights off and my camera flash on, I think these pics look better than last weeks. Bonus pic at the end of the view from my bedroom window. I'd love to see my buds get that frosty! 👍

Can’t wait to harvest 🤤

Week 10 (3-4 to 9-4) 3-4 Temperature: 22.5 degrees (lights on) 19.3 degrees (lights off) Humidity: 64% (highest) 59% (lowest) 4-4 Temperature: 22.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 66% (highest) 59% (lowest) 5-4 Temperature: 23.4 degrees (lights on) 20.1 degrees (lights off) Humidity: 64% (highest) 56% (lowest) No pictures. 6-4 Temperature: 24.4 degrees (lights on) 20.7 degrees (lights off) Humidity: 64% (highest) 55% (lowest) It looks like the plants are doing better since they havent got any water the past couple of days. Today i decided to heavily defoliate the plants. I also found a old feeding schedule from Green House with PH values, and it recommends that i should give an PH of 5.7 on coco. I thought PH 6 was good, but i was wrong, maybe this in combination with the plants being too wet, is the reason for the weird growing leaves, and the problems they show. I cleaned the reservoir and made sure there is no old water in the lines. I made a full strength 10L feed, and added it to the reservoir. I turned the reservoir on for around 3 mins, just to the point that the AutoPot trays are full of water and the valves are shutting them off, then i turn the reservoir off. I will do this every other day, so 1 time in 2 days. 7-4 Temperature: 25.7 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 50% (lowest) 8-4 Temperature: 26.4 degrees (lights on) 22.4 degrees (lights off) Humidity: 64% (highest) 55% (lowest) Today i turned on the reservoir for 3 minutes again, just till the trays are full of water. 9-4 Temperature: 25.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 51% (lowest) No pictures.

At the beginning of week 7 of flower she started to fade. Her leafs started to get dark purple starting at the bottom. At the end of week 7 of flower there were first signs of amber trichomes on the top buds. I will wait until the lower buds are mostly cloudy before harvesting.