Flower Week 0 Day 0 to 6 - 3/18 to 3/24 Flip Week. I used Flip - Day 1(63) Schwazze extreme defoliation and plan to do it again on flip day 21. This seems to encourage growth of the buds while allowing more airflow and training space in my grows. In which I used HST of he center colas of P1 and the center branches on P2 Feed this week was again an auto pot reservoir feed at 600ppm total before add-ins. I used 450ppm Veg concentrate mix (recipe week 2) and 150ppm Bloom concentrate mix (recipe week 5). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) and ph balance this week was for 5.8 where Io plan to maintain it until harvest. They should be mostly root feeding now and this should help with the uptake of nutes. Next week nutes will increase in Bloom mix again but also reduce in Veg mix. Feed will be 650ppm before add-ins with 5.8ph before feeding. Training of stretch will also happen next week.

Finally got somd fertillizer from bio-bizz, and i tied the top stems more to the the bottom to increase lower growth thanks to @Doggy for the help

The CBD has now fully recovered from her water logging adventure. The new leafs look very healthy and no signs of stress from the topping. I have to fix the ScrOG rack as the heat in the greenhouse caused the 3D printer clips (that hold the stand in place) to expand and loosen. Probably some binding wire will do the trick. Until I find a solution for the ScrOG rack, I applied an LST clip to the main branch. This will keep her from growing vertically too much. The next day the main branch was already pointing up. I attached some binding wire to keep the top horizontal and give the side branches a chance to grow taller. I bought some new clamps to keep the scrog rack in place. More on this in the next few days!

มาเรื่อยๆนะตอนนี้ แต่ช้า

December 15, day 1, seedling healthy with taproot growing 1.5 inches out of rapid rooter. Transplanted to seedling container. Under 25w Sansi LED untill it is ready for veg lighting. 5 gallon final container prepped with buffered coco/perlite. December 18, day 4. Seedling has had some issues with transpiration, probably due to not enough flushing of the coco. The result is damage to the tips/necrosis of the first true leaves. I flushed the medium and the seedling seems to be recovering. It is sending out more roots and growing at a steady pace. I also moved the seedling into its final pot. This feels a little premature, but it was over growing it's humidity dome. In the final pot it can be covered by clear plastic to maintain humidity. December 19, day 5, new growth is healthy which I am happy about. I will cross my fingers that my quick adjustments fixed the transpiration issues. I am hoping to get it huge and have it trained across the whole 2x4 tent, and it needs to avoid getting stunted for that to happen. 💪🌱 December 20, day 6, I had a bit of a scare when I accidentally knocked my humidity meter and it fell right onto the seedling! The poor thing was knocked right over. It seems to be fine, just leaning a little bit over which will hopefully correct itself in the next few days. December 21, day 7, healthy growing 🌱👍

This girl has been growing great. The structure is strong and has thick stem. Height has been good too, shes tall and really been shooting up past few weeks. Gonna scrog her next week and help tame some of the upward growth out. High hopes.

Plants took a few days to get stripped down. Missed the second week of flowering and stretching but oh well there is always next time. Very excited to see this canopy full of uniform buds its going to be a sight to behold haha.

End of Week 13 (6 week of flower) Cruise control on! Trying to make sure the environment is 100% in check, and I made a very light compost tea with some molasses and worm castings and a little bit of bone meal just to give them a calcium boost and some extra sugars so they can flourish into their final couple of weeks of flower. I have been keeping a cooler average temperature - and also keeping the relative humidity lower. Pest Report: None

I just harvested her today. Frosty looking nuggets with a pine citrus earthy aroma. Super sticky as well. I had about a 5 to 10 percent amber trichromes. I might of been a pinch early, but she was starting to foxtail. The colas look really nuggy. I had issues with mites early when I switched to flowering. This likely impacted some of the yield potential as she was neem oil treated for a week during that time. She did way better then I expected after that big stressor in play. Mites are long gone now. The plant will now hang dry 24 hours then get a light to mild agression wet trim, and end up in the cannatrol. To start a 8 day dry, and cure process. I will then run it in the bud trimmer. Then hand trim to finish. The G3000 light is a great quality light. I just ran it 19 weeks on a photoperiod grow, and had no issues with any of the Spider Farmer Equipment used. I used the 2.3x2.3x5tent, G3000 light, germination mat, 4 inch inline smart controller exhaust fan, and I will be using the new 16 inch Spider Farmer bud trimmer bowl when time comes. Excellent equipment from start to finish in my grow. I want to thank Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻💪🏼❄️🌱 I also want to sat the biggest thank you to the grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)

# Grow Bericht: Woche 5 In der 5. Woche sind die meisten Pflanzen in die Blütephase eingetreten, mit Ausnahme der zwei späteren Lemon Cherry Cookies. Düngung: Ich habe den Dünger um **Bio Bizz Bloom** und **Top Max** erweitert, allerdings nur für die zwei Mimosa Cake Pflanzen. Schädlingsbekämpfung: Die Trauermücken, die ich zuvor entdeckt hatte, sind nach der Behandlung mit Neemöl fast verschwunden. Pflanzenentwicklung: Die Pflanzen entwickeln ein schönes, großes Blattwerk. Die CBD-Pflanze sieht jedoch weiterhin nicht gesund aus. Vielleicht hat jemand aus der Community einen Rat dazu? Bei der Strawberry Banana Pflanze sehe ich eine mögliche Überdüngung an den Blattspitzen. Luftfeuchtigkeit: Ich habe einen Luftentfeuchter hinzugefügt, was dazu beigetragen hat, die Luftfeuchtigkeit relativ konstant zu halten. Das war's für diese Woche. Ich freue mich auf die kommenden Wochen und bin gespannt, wie sich meine Pflanzen weiterentwickeln werden. Bis zum nächsten Update!

420Fastbuds-Week 6 What up, fam. Weekly update on the Photoperiod Femenized strains. GorillaMelon,RainbowMelon, LemonManderian,LemonPaya,PapayaSherbet, and some FastFlowering GG4/Sherbet. For just putting them outdoors 3 weeks ago, they've adjusted to the heat like a dream mid 90's and tripled in size. To think there's probably 4 more weeks of veg. These are going to get big. I might have to raise up the greenhouse or make it a convertible. I'm still just feeding well water, probably 2 liters, each straight from the hose daily. All in all Happy Growing

And then there was 3. Placed one bomb in my tent with my Rez in darkness for a few days. Then I will harvest. Other 2 (Charlotte and Bomb) are still going with sensi A and B, bud candy, overdrive. Orange bud is just water now. Will be cutting in a few days Day 102. Cut bomb Finished drying both Charlotte's that were harvested last week. Haven't weighed them yet. But they are both in jars curing.

We are nearing the end and she looks beautiful. I will flush with plain RO water the next week or two while she ripens. I didn’t do any training to her. I have a clone from her and I cut a few leaves from the top of the meristem when she was vegging and she responded with 6-8 branches catching up with the top.

Welcome to the second week of flowering of the Limited edition strain Orange Skunk Ryder This thing smell dank... really really dank... dank like a real skunk I wouldn't recommend this one for indoor growing without air filter. such small thing with such big smell it's only in week 2 of flowering, i was expecting some flowering hairs and that would be all i could expect. But this thing has a small handfull of small nuggets that are feeling quite dense already... a bit early to be that compact perhaps, but very nice to see

********** Week 2 of flower, Days 8 to 14 - Sept 26 to Oct 2/20 *********** It has been an exciting week with finding a crack in a main stem and started plus we added new supplemental nutrients to the feed as well. These girls are starting to push out some frost now as well. Overall, they are a little more squat than the other girls in the same tent but these girls are looking awesome. Buds are setting and starting to stack more as well😃 Pretty solid growth and bud sites for week 2 flower. Her leaf tips have been up and she is happy........she is happy all the time other than the first half hour of waking up😃👍 Very nice little girls to grow so far. The branching is certainly a little more lateral/horizontal than other strains I have grown. Could be that I was a little more aggressive with topping and tying down and they simply didn’t need it. She is not a long lanky strain and is making nice little bush shapes. She won’t have many colas but should be thick guys. C471 should be fewer and thicker while C472 will have a couple more colas but likely the main ones won’t be as thick as C471.......time will tell🧐 On Sept 28 I found a crack and had to do some repairs. Cream 471 was worse off the Gorilla Girl 4 with her cracked stem. GG4 was caught early enough that she didn’t separate much at the base. Looks to be as though I have caused the issue by topping the main stem a little too low😢 Coming back though now and when she was tied together and looked after she is bouncing back, its crazy how these plants can heal themselves😀💪👍 Took the tips from fellow growers and decided to try and fabric something with some cushion so that the straps holding the branches together don't cut into the branches. Needed another tool of the trade.......DYNAVAP to calm the nerves😀 because the grow has been going well and this set back has me pissed off as it is grower error😡 Seems to have worked out pretty well though and will keep our fingers crossed that the end result will be a frostier girl👊🤞 Switching the PK booster at the end of the week to Big Bud and started to add Rezin from Green Planet. Not much for Bud Factor X left so will run with Terpinator and Rezin as a replcement. 2nd layer of SCROG netting added early in the week, Sept 27/20. They are pushing out a good amount of leaves now and stretching so need to provide that added support for down the road. IPM spray again this week, last opportunity, with Plant Therapy. There has been something in the tent and I think I have killed them. One more shot though to make sure and before there are too many bud sites. Love this product!!!!!! Works so well at getting rid of thrips and mites. Little more detail........ Sept 26/20, Day 8 - Little heavier feed as they have not been watered for two days - 4L - CalMag @ 2ml, Sensi Bloom, B52, Bud Candy, Bud Ignitor @ 1ml - 830ppm and 5.7pH - will start to let the pH rise bit now over next couple of weeks Sept 27/20, Day 9 - 2nd SCROG layer added. Sept 28/20, Day 10 - more microbes today - 4 L - Microbial Mass @ 1.5ml, CalMag @ 1ml - 290ppm and 6.3pH - pH was a little high but left it...wasn't moving and then boom,,,,,,,oh well. - Good amount of runoff today. Sept 30/20, Day 12 - Heavier feeding today - 5L - CalMag, Vitathrive, Rezin @ 2ml Rhino Skin, Bud Candy, B52, Sensi Bloom @ 1ml. - repaired the cracked stem a little better tonight......was not sure how this girl will work out. Crack is fairly substantial. - Try and keep the paper towels wet now so the humidity is high around the wound. - Should have left a little more branch from the node above when cutting the top. Oct 1/20, Day 13 - Switching PK booster today to Big Bud......these two girls are past bud ignitor.....already stacking. - 3L - CalMag, Sensi Bloom, B52, Bud Candy, Big Bud @ 1ml - 665ppm and 5.9pH - IPM spray tonight again with Plant Therapy. Think I have seen some bug damage on Cream 47 girls. That takes us to the end of week 11 in growth and week 2 of flower. Time will go quick now that we are off and running. Will be done feeding by early week 7. Want a good flush and leeching on these girls to get all the nutes out. I have been missing it by a few days on the last few auto runs and want this photo run to be better as I have a better track of weeks and when she will be done..........should be done by the end of week 9, about 7 more weeks. Cheers Growmies and have a great week. Thanks very much to Mr_Motalovah and spacecadet55 for sharing your comments on cracking the main stems. Should be avoidable next time and appreciate the knowledge🙏👍 Nice strain Sweet Seeds.......these girls have my curiosity and can’t wait for the smells to start more as well!!!!👍🙏

Hello everybody!🙏🏿🌸 the girls recovered well after the topping , with no grow stops and feeling pretty good! ( 2 of them even got 4 new main stems ) Looking forward for the first trimming and flower phase. Moisture is pretty high, I noticed water forming under some pressed leaves. -They getting 1,25,l 2x per week - The roots start to grow out at the bottom of the pot Fan running on full power and they hearing classic music most of the time Day 20 -each Lady got 1,25l - pulled the baby leaves at the bottom -replaced them in the tent - placed van on a higher point " Cant wait for start of next week and flower phase🌸🙏🏿" Day 21 - noticed water on the side of the tent - leaves got greener after watering - some leaves got little burns on the edges so i adjusted the light

Week 7 of flower Feb 19, 2024.

Привет друзья. Хочу познакомить вас с новым сортом автоцветущих растений от Smail_Seeds сорт ORIGINAL AUTO CHEMZKITTLEZ F1 reg. Сегодня растению 15 дней. https://t.me/smail_seeds #Smail_Seeds

Here we are, the start of flower! From here I'll be uploading videos daily.

🌱 : 💧 : 4l day 63, 2l day 68 💡 : Dli: 40 mol/m²/d 🤔 :