Week 4’s in the box and these plants are lightning quick outta veg. We’ve confirmed the presence of at least 3 males and 1 guaranteed female so far. They’ve all started to hit vegetative maturity in full stride so it won’t be long until we look to flip. A couple have been topped once more for the sake of additional colas and if we get lucky, the remaining females may be suitable for a scrog. Either way, can’t be much happier about how well they’re growing at this stage. Here’s hoping it remains so through flower🤞. ***Notes: strongest plant to this week is first confirmed female. Prob a prime candidate for cuts and back pollination with the F1 pollen dump.***

Plants seem to have just dropped into flower🎉 all seem healthy to me, just took a few of the bottom leafes off for the air to circulate better. What does everyone think? Do they look healthy for their age? 2x sugar mama are shooting up past the other 2

Week 5 - Day 2 - 11.12.2017 - Hay lovers of Green, i will give you a big update. While trying to fix the PH and Humidity issues last week, i've already found some nice root developments and decided to transplant to support the regeneration - 6.12.2017 -. The Plants were unhealthy and shocked. After 2 Days they started to reviltalize and stable - 08.12.2017 - and i found a suprise, the adjoining Auto Dinamex's start to Preflower. - Today the sweetys are healthy,vital,bushy and got nice stems, in height arround 18 cm The BCC'S internod distances are longer and the stems are thinner as the ICED G's. - ■ Blueberry Cheesecake [ Cheese x Blueberry Multiple Hybrid ] ■ ICED Grapefruit [ ICE [Skunk Special x White Widow x Blueberry] X Grapefruit [ C99 x Cinderella x Sativa ] - ■ Timeline ■ Germination start [ 04.11.2017 - 17:15] Germinated / into Coir Pellets [ 06.11.2017 ] PreVegetative start [ 07.11.2017 ] Transplanted into 1L Airpots [ 19.11.2017 ] Vegetative start [ 26.11.2017 ] Transplanted into 7L TeKu [ 06.12.2017 ] - PreFlowering start [ xx.xx.xxxx ] - Flowering start [ xx.xx.xxxx ] Harvesting Part 1 [ xx.xx.xxxx ] Harvesting Part 2 [ xx.xx.xxxx ] - ■ Growroom ■ Size » 90x90x170 ~ 0,8 m² - PreVegetative Lightning » 24 ▪️ LED ~ 33W - daylight - 3700lm Vegetative Lightning » 24 - 20/4 ▪️ HID ~ 250W - 5600K - 18.000lm Flowering Lightning » 12/12 ▪️ HID ~ 400W - 2100K - 56.500lm - Supply air ▪️ mesh window - negative pressure Exhaust air fan ~ max.420m³/h ] Circulating air fans ~ 3x16W max.2250 rpm - Pots ▪️ Coir Pellets --> 1 L Airpots --> 7 Liter TeKu. Medium ▪️ Organic Soils! Composition ▪️ bark humus,wood fibers,coconut fibers,coconut husks,compost,guano,hornmeal,clay minerals,trace elements,calcium carbonate,perlite. - ■ Supported by ■ » Female Seeds - so easy ! » Cellmax - Organic Growing. ////////////////////////////////////////////////////////////////// 👋 Greetings your organically » tried and true, since simple is the best! 👍

Everything seems alright. Working on the new grow room, starting the next round shortly

Que pasa familia, de nuevo vemos el avance de nuestras northern light xL, es una genética bastante ramificada, a diferencia de las Lemon, estás si escupen brazos laterales a la altura del central. Flores compactas vemos cómo los productos de advanced nutrients cumplen sus funciones. Es una genética que si pide bastante comida a diferencia de las demás. 50% de maximas en humedad y 28 grados de maxima en la temperatura.

Day 48 (Day 6 12/12) Plants grow real strong and all show that they are female. Lamps are on 100 % now. These lady's stretching fast. Day 52 (Day 10 12/12) Pushed down the stems in the scrognet First clone rooted and is now in a p9 on lightmix Day 54 (Day 12 12/12) Good stretch. Durban is not stretching to much. Buds are slowly forming.

°25/06/25° Day 15, plant on the right is doing good, showing it's next node already and is showing beatiful colors. The plant on the left is having some troubles and i think its because i maybe overshot the Phospor. If anyone has tips on what certain grow issues mean, by all means tell me how to! Getting them ready maybe on day 20 to move them to a bigger pot! Maybe ealrier if i sense that the rottse want more space, i'll check the soil tomorrow. °27/05/2025° I repotted the plants and saw that the roots were already grinding the sides! No extra nutrients cause they still young and i use solid nutrients inside the soil mix right now. Still don't know why the right plant is acting up like that, i don't have enough experience or knowledge. °28/05/2025° Nice and steady growth on both of the plants, the right one doesn't look good but seems to grow well and adapt easily inside the new soil! Sprayed water on the borders of the soil to make the roots seek for food a.k.a. growing roots. °29/05/2025° I don't know what i'm gonna do with the left plant.... She is miserable but still growing altough she is 1 extension slower than the right plant. The right one is still thriving, no discoloration on the leaves no burned marks so everything is going smoothly! °30/05/2025° I took these pictures at 2:30 AM on the 31st because i was only then home from work. I decided the left one could grow some more but leave it as it be and the right one had her 5 and 6 node so i topped her at 3 and 4. Pushed down on the fan leaves of 3 and 4aa for little LST after the HST of topping!

beautiful plant

Comme la semaine dernière, on peut observer une importante refloraison sur une des deux Mazar (la n°2 est plus discrète), et sur l'Afghani#1. Les trichomes ne sont plus ambrés. Patiente donc.... J'ai eu l'impression que la tête principale de la Mazar était en train de moisir. Du coup séchage et fumage ;) Les landraces (Sinaï et Libanaise) continuent leurs floraisons tranquillement 🐫

Beginning week 9 Plans this week: Make a long time lapse while away this weekend - post more photos too Lollipop Tuck and tie a bit Possibly build a second scrog level?? Thoughts anyone?? Research and purchase or build a “grow room controller” - tent: temp, rh, light(?), co2(?) — rez: ph, ec, temp, water level - maybe more stuff like tie in the cameras, also basement temp and rh, fan and lights and pump contro. Nutrient dosing and ph control would be awesome but likely too pricey— but I’m a geek and this will be fun! I’d prefer a prebuilt system but I’m not totally opposed to building an Arduino/pi style solution (reliability and time to get it right are concerns tho - plus I have an arcade cabinet project I’d like to get to soon) — **ANY THOUGHTS OR ADVICE ANYONE??? To do list: I picked up some angle aluminum and I plan to finally make a single frame for the numerous LED lights Mount things to the wall (temp and humidity sensors, timers, utility light, etc) General cleanup and house keeping - wire management etc Install new portable air conditioner in the basement - this will be a bit of a project - casement windows and other issues Hopefully this week: install a utility sink in the basement and tie into the water lines and waste lines of the house (no more carrying water and waste upstairs!!)

Coming soon

3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs

12/30 - Dropped the 3x3 net for spacing - Micro dosing Silica and Green Planet through harvest - Sick plants have bounced back and are flowering accordingly - Update concluded 😎😎😎😎 01/01 - First update on the new year!! (2026) if you are reading this, many blessings and prosperity to you and yours - Closing out in the first 30 days of flower - thus far all running accordingly - dropped the light intensity down to 50 for offset heat index down to 71 degrees, humidity around 50-60% 01/03 - Thus far all is rolling right a;ong - Feedings are increasing from once every three days to once a day between clean water and nute feeds - ran out of Cane Molasses subbed with light brown sugar - Trichomes are setting in nicely - water temps for feeds are between 52 and 65 degrees.

Ostatnie dni. 2 może 3 i będziemy ścinać. temperatura 23-22C , wilgotność 40%. Podlewane tylko wodą. Zdecydowanie mniej pija, zszedłem do 0.6l.

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D22/V18 - 07/05/24 ⚗️ EC: 0.7 pH: 5.3 🌡️ T: 22 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D23/V19 - 08/05/24 ⚗️ EC: 0.7 pH: 5.3 🌡️ T: 22 °C H: 50% 🌊 🍗 💧 💼 Topping and LST 🧠 🚀 🎬 1 TL video of grow and one of the topping ______________ 📅 D24/V20 - 09/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D25/V21 - 10/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 12 L 🍗 Calmag, Grow A-B, B52, Hydroguard, Rhino Skin, Bud Candy 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D26/V22 - 11/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬 1 TL video ______________ 📅 D27/V23 - 12/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬 1 TL video ______________ 📅 D28/V24 - 13/05/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 20°C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬