No problems

This girl has gotten exceptionally thick and juicy over the last two weeks, and she WREAKS of juicy fruit gum and pungent gas. The trichome coverage is rivaling double grape at this point, and I’m more than ecstatic that I’ve got 4 more beans of this left! I might top her next time around, I’ll probably get a more even canopy that way. Either way I’m very happy with her :)

Went away for seven days had a friend come by and water the garden Absolutely exploded since I’ve seen them last very pleased with all of the plants except for mystery auto number one. It is disappointing me some but hopefully the top will bring more growth. Can’t wait to see these continued to develop!!!

07/05: made LST and Defolation New res EC: 1,13 PH: 5,8 I'm only adding PH- for now.. PH usally raise and EC remain constant Installed carbon filter and an additional air extractor

Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]

Buenos humos amigos!!bonitos dias de agosto jueves 6 de 2020 un saludo desde españa con este entretenimiento aki os dejo

Been hard sourcing everything I have needed for this room with the current situation. Fortunatly everything seems to bouncing along and are comfortable in the new tent.

A lot of problems with run off PH It drove me crazy, and i gave up Now is aprox 6.5 and i will see how it will go

Over all was an amazing grow, super sticky dense nugs with smell of berries, highly recommended for everyone!!

Things are moving along as they should. I've been keeping a closer eye on the pH in the trays themselves (as opposed to in the reservoir only) due to some noticeably high pH (>7) in the trays. Doing so seems to have halted any further chlorosis (yellowing of leaves). Additionally, I've started supplementing with Orca as well to help with controlling algae in the reservoir as well as giving the plants a bit of a boost to root health. We'll see how that goes.

Defoliación leve🍀👨‍🌾🏻

I put the clones into bigger Pots once their roots were fully established. Immediately started LST and put in the clones at an angle so that light is distributed more evenly. Autos also growing well but Panty Punch is lacking because of crippled leaves. I still let her live to see how she develops. I plan to bend the clones in a circular shape so they grow into an even canopy.

The ladies are still doing great and stacking very nicely! The leaves do look very very dark green with slight tip burns, so I doses down the nutrients slightly from 1100+ to 950 ppm! The grow light makes the leaves look more light green than they actually are (check the night shots) both pheno’s smell like a nice and strong gelato (vanilla/gas) 💪🏻

Don't have a lot of time these days to take pics so I'll sum things up. CO2 got outta control and the plants took tf off literally. The video is around middle of week 3, I had to flip at week 4 BC I literally ran out of room and I had to constantly defoliate.

Pre flowering going to the end. Plant looks good and healthy. UPD: Just find out this interesting mutation on 2 cols! Check it out! 2 heads for the same price!😂

Dried already and curing now. Had some complications on the way but im glad with the outcome

Va creciendo poco a poco mi watermelon zkittlez

White Widow – Week 3 Flower | 12-12 From Seed 🌸❄️ Cycle: 12/12 (sometimes 11/13) from seed Stage: Flowering – Week 3 Feeding: Aptus + Plagron + All-in-One Liquid ⸻ Full Flower Mode Our White Widow has fully embraced her flowering stage. This week marks her third week in flower, and she’s already showing beautiful bud formation from top to bottom. Despite her compact size, she’s filling in evenly and with excellent structure. What really stands out is the early frost. Resin glands are already visible, sparkling under the light. For such a modest-sized plant, her energy is clearly going into dense flowers and resin production, not stretch. She’s showing her true White Widow heritage, compact, resin-heavy, and vigorous. ⸻ Nutritional Strategy This week, her feeding remains consistent with the established recipe: • Aptus Regulator – 0.15 ml/L • Aptus CalMag Boost – 0.25 ml/L • Plagron Power Buds, Sugar Royal, Green Sensation – 1 ml/L each But we’ve added something new: • All-in-One Liquid 🌱 This addition is meant to give her a balanced nutrient push during this critical phase. By Week 3, plants are transitioning from bud set into flower bulking, and the All-in-One helps provide extra micronutrients and macros that might not be fully covered by the base mix. The goal is to give her everything she needs for flower development, without overloading her. We’ll be watching closely to see how she reacts, but so far, she’s thriving. ⸻ What’s Happening Now At this stage, we see: • Bud stacking beginning across multiple sites. • Resin production kicking in early, with noticeable frost. • Minimal stretch, as she stays compact and focuses on density. • Healthy leaf expression, still a deep, vibrant green. This week is often called the “foundation of flower.” The plant sets the stage now for how heavy, dense, and resinous the later weeks will be. If nutrition and environment stay on track, we can expect these bud sites to start bulking steadily over the next 2–3 weeks. ⸻ What to Expect (and What Not To) ✅ Expect: • Rapid increase in bud density. • More trichome development, the frost we see now is just the beginning. • Aroma starting to intensify as terpenes begin expressing. ❌ Don’t expect: • Major vertical growth, her stretch is over, and she’ll remain compact. • Early harvest, White Widow typically flowers for at least 8–10 weeks. ⸻ Educational Note – Why Early Frost Matters Trichome production this early is a good indicator of plant health and genetic quality. Resin glands serve as protection for the plant against heat, light, and pests, so seeing frost at Week 3 tells us she’s thriving under the current conditions and that her genetics are naturally resin-heavy. For growers, this means a higher chance of strong aroma, flavor, and potency later on. ⸻ A Quick Recap of the Journey • Germination: Not an easy start — mistakes were made, but this White Widow was the survivor. • Veg: Compact growth under 12/12 from seed, slower to show flowers, but structurally beautiful. • Flowering: Took her time to enter full flower mode, but now she’s moving fast and strong. She’s the perfect example of how patience, careful nutrition, and trust in the genetics pays off. ⸻ Shoutouts & Gratitude 🙏 🌱 Zamnesia – for the legendary White Widow genetics 💧 Aptus Holland – for reliable, precision nutrition 🌸 Plagron – for flower enhancers that push her into full bloom 💡 ThinkGrow & Future of Grow – for the light power and spectrum balance 🧠 TrolMaster – for stable and adaptive control of the grow environment And most of all — thank you to everyone following along this diary. Your time, support, and interest in this journey mean everything. This isn’t just a grow log, it’s a story we’re writing together. ⸻ 📸 This week’s gallery includes: • Close-ups of bud development and trichomes ❄️ • Studio shots highlighting her compact beauty • Room updates with environmental stability Next Week Goals & Forecast 🔮 As we move into Week 4 of flower, here’s what we’ll be watching for: • Bud Bulking – Flowers should begin to thicken, with calyxes swelling and pistils multiplying. • Resin Expansion – Expect a noticeable increase in trichome coverage, making her sparkle even more under the lights. • Aroma Kickoff – White Widow is famous for her pungent, earthy-spicy scent. We should start catching stronger whiffs this week. • Nutritional Balance Check – With All-in-One Liquid added, we’ll be observing closely for any signs of overfeeding or lockout, though so far she’s responding beautifully. • Environmental Consistency – The new AC unit is stabilizing temps and humidity — a perfect setup for flower development. Holding VPD steady will be key. ❌ What we don’t expect yet: • No real ripening signs (amber trichomes or fading leaves) — it’s still too early. • No heavy weight yet — the bulking comes between Weeks 4–7. This next stage is often described as the “early swell” phase. It’s where flowers go from just “forming” into recognizable buds with weight, density, and stickiness. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. Friendly reminder all you see here is pure research and for educational purposes only, With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all