Likes
Comments
Share
Aufgeholt wie eine 1! Dicker Stamm, kräftige Triebe. Sie kommt super zurecht. Die Wurzeln sind unten am Boden angekommen. Gelbtafeln und Blautafeln vorbereitet.
Likes
8
Share
Did some defoliation of the lowers. Been just dunking this lady in the water bucket daily. Have a slight deficiency going, but will wait and see since it’s the start of flower
Likes
30
Share
05_02: ça y est là flo. A démarrer. Un grand merci à @xpertnutrients pour son support! Pour l'instant j'utilise que les booster et les micro nuts de la game et ça le fait 👌 nickel. Je suis impatient de faire un session avec uniquement du xpert nutrients. En tout Cas leurs additifs sont aux top!
Likes
9
Share
Likes
2
Share
Questa runtz continua a crescere in altezza,. Oggi lunedì 22 dic. L'ho dovuta ripiegare ancora.. gli ho fatto un altro HST sennò passa i 2 metri di altezza 😉🤣😂😘
Likes
7
Share
@Ninjabuds
Follow
My ELUFAH UAP 1500 test grow is showing excellent results, with the plant thriving under my care. The addition of the ELUFAH Saturn Ring under canopy light has been a game-changer, significantly boosting growth. It's clear that the supplemental lighting is providing the plants with the extra energy they need for robust development and impressive yields.
Likes
2
Share
This was the week I decided to take a look at my trichomes with about 2-3 weeks left why not see what’s in store for me. And what I saw was some pretty milky stuff with surprisingly some amber to me that just means I’m going to get some good thc levels I’m shooting for at least 22-25% thc wish me luck we are almost there final stretch
Likes
8
Share
@Drtomb
Follow
I'm 4 days into flower. Topped all the plants nice and even. Then removed all bud sites below the top 4 on each branch. Leaving fan leaves intact. I allowed them to recover for 2 days. Then flipped the lights. Gorilla Zkittles has huge indicia leaves. The plant is growing nice and has no nutrient burn or other defects.
Likes
6
Share
@TyRun
Follow
Placing a dehumidifier or humidifier in the grow box turned out to be ineffective when both devices have their own automated settings. For instance, a humidifier set to 55% humidity works within a ±5% range, meaning it waits until the humidity drops below 50% to turn on and runs until it hits 60%. Since its sensor refreshes every 30 seconds, it might show 54% one moment and jump to 61% the next—not exactly stable at 55%. The dehumidifier behaves similarly. To achieve more consistent results, it’s better to rely on a hygrometer inside the grow box and use “dumb” devices that simply turn on when powered. Connecting these devices to smart outlets provides more precise control. For manual control, I maintained around 55% humidity by turning the humidifier and exhaust fan on and off via phone. Most moisture and aroma are released during the first three days, then taper off. The common rule of “when thin branches snap, it’s dry” led me to overdry my buds. A more reliable method is to monitor the hygrometer. When humidity stabilizes after the initial rise, wait one more day and then jar the buds. Rehydrating Overdried Buds: Overdried buds can be revived with a small piece of mandarin (or orange) peel, about 2.5x2.5 cm. Thoroughly wash the peel (even sanitize it if needed), cut a square, and place it on top of the buds in the jar. In my experience, this brought the humidity from 46% to 62% within 4 hours. Afterward, burp the jars for 15 minutes and monitor the hygrometer. If the humidity drops below 55%, return the peel for a few more hours. Once stable at 60-62%, remove the peel and continue curing, burping the jars twice daily for 15 minutes. As for humidity packs like Integra Boost or Boveda, I used them because I had some lying around. These packs are designed for 12 grams of product, so they don’t make a big difference in larger jars. If you burp jars daily and gently rotate the buds, they’re not really necessary. Trimming and Results: After 7 days of drying, I decided to trim dry this time. It turned out to be somewhat more convenient—everything gets covered in resin anyway, but the remaining leaves easily fall off, speeding up the process. I went for a tight trim, removing as much as possible. During the process, I felt disappointed seeing how little remained on the branches. The buds turned out airy and small, and I started cursing American genetics halfway through the trim. However, when it came to weighing, the results were surprisingly decent. Considering the buds' poor appearance, they’re not going to impress anyone visually, so it might have been easier to shred everything and use it for extraction. I don’t have extraction equipment, so I’ll make cannabutter from the trim, and the buds can rest in jars for now. Takeaways: Use a proper hygrometer for humidity control, not built-in sensors on humidifiers or dehumidifiers. Overdried buds can be easily rehydrated with citrus peel. Daily burping and rotation are sufficient for curing without humidity packs. Dry trimming can be faster and more convenient but may highlight issues with bud density. Despite underwhelming appearance, high resin content makes the strain great for extraction.
Likes
6
Share
@PapaTerps
Follow
Strawberry Gorilla Automatic - FastBuds Day 71 - watered with 1L of RO tap water with defined nutrients, mixed in order and then pHd to 6.3. This will be the last feeding with full nutrients as I now start to prepare her for harvest! Her next feed will include half of the defined nutrient units and then she will have her first flush! 👍🏻 She has taken on a beautiful purple hue on her flower now along with the deep purple on her leaves, this combined with the white and amber of the pistils, and the lime green on the bud sites, really makes her pop and shimmer, shes very beautiful!😍 Her armoa is really starting to come out now too, she smells just like strawberries and candy! Her trichomes are mostly milky with some starting to turn amber, so I'd say another few days and she'll be ready for harvest! I know she wont have a huge yield, but the point of this micro grow, was to find out more about the strain and how what a micro grow could achieve, so no matter the yield, I am super happy with the results so far - to the point where I am planning to have two micro grows in my next grow (TB SkillteZ by Bulldog Seeds & Pineapple Express F1 by Zamnesia)🙌
Likes
3
Share
@jaydee702
Follow
The girls are hardening up and glazing over with tricombs its looking like all of nine weeks mabe ten before ripe for smoking since she stretched 2 weeks longer than ever before with this strain .finally forming some really nice nugs starting to stink a little has a flower garden sweetness that stinks so good.cant wait yum yum. Found some male parts in popcorn below canopy I got rid of everything below the canopy to keep her female only new pics are 8 weeks and 5 days in flower stil needs to rippen its in full Bloom now so im flushing till she is ready next week or so
Likes
1
Share
Die letzten 3/4 Wochen und es klebt diese Pheno ist so stabil in COCOsoil das wird nochmals gegrowt!!!! Bleibt dann Terpene bis an die Tür raus
Likes
21
Share
Lots of growth this week had to switch nutrients since I ran out of sensi grow anb
Likes
2
Share
Starting to smell like chocolate 🍫, I'm going for 2 more weeks before chop
Processing
Likes
3
Share
MONDAY: Taking all those cuttings last week seems to have really triggered her auxins, all branches are stretching, even the ones I cut from, but her main is reeeaaalllly stretching.. I think I'm gonna have to either top her or supercrop her. I've got to keep her height down so she isn't too much of a pain to deal with in a tent full of her little clones. this fall. Or maybe I'll just stick her in a closet somewhere and keep about 15 watts on her all winter long, then take some more cuttings to put outdoors? I wish I know for sure how well she smelled/tasted/intoxicated. I'd hate to learn she's a super-plant and not be able to grow her again... WEDNESDAY: I gave her a drink of water with bud candy and calimagic and started foliar feeding with Flower's Kiss. THURSDAY: I checked her clones today...4 have rooted very well and going into 3 gal pots tomorrow. Foliar fed her and told her how beautiful she looks. FRIDAY: I gave her a gallon of grow nutes including Microbe Brew and also started her on Terpinator. I planted 7 of her clones in 3 gallon (white) fabric pots today. They are sharing the 4 x 4 tent with the 6 x White Widow + 1 x Candy Cane seedlings for now. SATURDAY: I planted 7 of her clones today in 3 gallon (white) fabric pots. I added two new blue/cold white LED panels to the 4 x 4 tent. They are kickass. Very low heat and excellent coverage. The 2 lights is overkill for this space, but I like it....a lot. So much so, that I will order 4 of them in 660nm deep red for flowering..two for the 4 x 4 and two for the 5 x 4. I also bought and installed a 16' string of 300 Cold White (7000k)/Warm White (2800k) strip lights(150 each). It has a remote control which lets me change over to warm white for flowering...or have steady cold white and pulse warm white..or whatever. I think that they will serve as excellent low-heat side/corner lighting. Kinda pricey because in addition to the lights, you have to buy a controller and power supply, but they seem very effective. I plan to order another set for the 4 x 4 tent. But, it's a double-row set (600 leds) ..one row of lights is warm white, and the other is RGB adjustable, so I can run 440nm blues for veg and 660nm reds for flower. I plan to keep them just below the canopy so as to illuminate the secondary and tertiary buds as much as possible. Once this concept is proven (and once I save the money), I'll do the same thing in the 4 x 5 tent. Update: Ok, so I've decided I'm only kinda happy with the strip lights.. I've decided to try velcroing 4 of those 4' integrated led tube lights in cold white for veg and warm white for flower to my horizontal poles. The cold white(6500k) are 2-rows of lights that pull 36w and put out 3000 lumens each and the warm white(2700) are single row pulling 24w at 2200 lumens each.
Likes
12
Share
@QueenBZA
Follow
This is a flush week, next week we shall be introducing EHG Ripener for the very first time in our grows,does it work? Does it not? We'll find out soon enough boys and girls.
Likes
10
Share
@4Ganic
Follow
This is mid-week four. These pictures are up-to-date taken today. I have LED light so and little other lighting on, so excuse the picture quality. I am no longer using Air, which is an iron supplement. I only used air 2 twice in Veg. Very powerful and boosts growth rate and health.
Likes
12
Share
Nearing the finish line! OMG these ladies are blowing me away 😳 the Tricomes are carpeted, the buds are fat and dense. I’ve been. Tapering off all the nutrients and feeding ph’d water until I get 10-15% runoff from the pot to help break up the pockets left behind and to use up what’s left in the plant. Have some very distinct phenos, all of them are stellar but there are a few standouts… won’t be much longer 🇨🇦👊❤️
Likes
22
Share
@BlumenBot
Follow
1/16 - got the first topping done for the mainline. Cleaned up the rest of the shoots below. Excited to do a proper mainline for the first time!! Going for 8 tops 1/21 - pretty sure I overfed her! She will be getting phed water next feeding. She's coming along though! I may not cut her for another week to let her fully recover and start thriving again 1/23 - not topping her just yet, she is still developing that 3rd node on the 2 mains so I will shop her in a few days and clean up some of the lower stuff. Knuckles looking thick!
Likes
14
Share
Big defoil day 43 and she pretty much into the light