The Grow Awards 2026 🏆
Likes
Comments
Share
Not every part of the New Year starts with a bang 😅 Before your Growmie went on a short trip, he massively overwatered his plants. I’m back now and fixing the mess I created. The strategy: After flooding the pots a few days ago, the roots were basically starved of oxygen. To make things worse, I then let them dry out a bit too much - classic overcorrection. 🤦‍♂️ Now it’s about finding balance: letting the soil dry properly, restoring oxygen to the root zone, and encouraging fresh growth. With some patience, they should bounce back within a week or so. 🌱💨 The Critical plant is also showing signs of nitrogen deficiency, which I’ll keep an eye on and address carefully once the root zone is happy again. For now, I’m not giving up on them. I’ll gladly trade a one-week setback over a three-week one any day. Feel free to follow along while I try to fix my own gruesome mistake 😂 Growmie lesson: Overwatering isn’t about how much water you use - it’s about how often. And overcorrecting can be just as stressful. Roots need air as much as they need water. Let them breathe, and they’ll recover faster than you think. 😉 Stats so far: 💧 Watering: Trust the process 🌡️ Temp: 24–26°C 💦 Humidity: 75% RH (ideal for early growth) 📈 VPD: ~0.75 kPa 💡 Light: ~400 PPFD
Likes
120
Share
@Hologram
Follow
OK, im doing an update now becouse my breakup cake is going tranny!!(hermie) I already have noiticed she was not growing as strong .. but u can blame that on anything , especially when growing outdoor.. but this morning i saw that she was g(r)oing 'bananas'!😢 I have put her aside from the rest (in the back of garden) but think gonna have to terminate her asap!..(and i will, right after this post👍) The weed she will give will be filled with seeds and those seeds will be hermies too, so wothless.. and if i dont throw her away quick she can infect the rest. So goodbye breakup cake..😢 who wants to eat a cake when they are breaking up anyway..😒 (just hiding my pain with lame humour 😳) happy growing for all ✊
Likes
5
Share
@cwgrows
Follow
Mass cloning! Not sure how many are going in the greenhouse yet but I will just give away any I don't use.
Likes
52
Share
@GYOweed
Follow
Looking good. Temps getting much cooler. STSing one branch for pollen.
Likes
25
Share
@Mr2toke
Follow
Day 7 - 21/09/23 🌳 OG Kush is growing well. a nice healthy shade of green, and a decent height too. although the first leaves are a little odd looking to me. maybe its a phenotype thing? 🤔 Day 10 - 24/09/23 ok so i saw this growth on my OG Kush, which was not there last night... mold? mycelium? what the hell is this? 65W LED hanging at 14" running at 80%, 18/6 light schedule. Just using water to keep substrate around seedling hydrated. roughly using around 200ml every 24hrs.
Processing
Likes
47
Share
I managed to turn the negative heat temperature in to something positive by introducing co2 to the environment. As a result of the diy co2 method some of branches grew up by 1.5 inches in 2days! Will continue to utilise co2 in the box for now. I also had to adopt the defoliation method Way to many leaves could cause problems by raising the moisture level in the box. As a result of the defoliation a lot of light is reaching the bottom of the box. Which means I can grow other small plants in the box. I switched to bloom NPK ratios. Slowly introducing the raw mix. It’s doing fine and as allways no tip burns
Likes
8
Share
@THCussy8
Follow
Drip ring system cobbled together for fertigation.
Likes
44
Share
Started the flush on the skittles The runtz is having a mega growth spurt and is growing very quick, lots of bud sites. Little ethos is still a baby lol but hopefully will be a beast 🙏
Likes
42
Share
Hey everyone 😃 Today is the 42nd flowering day. Both phenotypes continue to develop great 👌. For me they should have been a little bigger. But since I have cuttings from both, I will let them grow longer next time 😀👍. The buds also continue to grow vigorously 😀 and already smell very sweet 😍. I am very curious how the coming week will continue and until then I hope you have lots of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
33
Share
The buds are getting fat and tasty. Looking at the plant the harvest won't be the best but hopefully the smoke will be nice 🙏☘️😀
Likes
19
Share
Gracias al equipo de Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster, sin ellos esto no seria posible. 💐🍁 Gelato #44: Los criadores de Tyson 2.0 criaron Gelato 44 a partir de cepas finas. Al cruzar la Sunset Sherbet y la Thin Mint Girl Scout Cookies, crearon un híbrido de dominancia índica que asesta fuertes golpes en el cuerpo y la cabeza. Su contenido de THC del 22% crea sinergia con terpenos colocantes para ablandar los músculos Mantenla hidratada y con una dieta constante y pasará por la fase de floración en unas ocho semanas. Las plantas de interior alcanzan una altura máxima de 120 cm y producen 400-450 g/m², mientras que sus homólogas de exterior alcanzan los 180 cm y producen hasta 600 g por planta. 🚀 Consigue aqui tus semillas: https://www.royalqueenseeds.es/rqs-semillas-cannabis-tyson/664-dynamite-diesel.html 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 4: Continuamos la etapa de vegetación, ella se desarrolla muy bien 😎, comienza el buen tiempo, temperaturas agradables para todos. Esta semana se aplica una solución de trichodermas para una mejor adaptación aunque realmente va genial. Se mantiene 1/3 de nutrientes Master Root y Master Grow
Likes
4
Share
@Adrrys
Follow
10 semanas desde germinación día 11 de abril hasta corte viernes 25 de junio (día 69 corte) cultivada en maceta de 11 litros con tierra plagron all mix, inicio de floración en semana 5, día 20 de mayo
Processing
Likes
14
Share
Today 7/30/19, day 57 and the start of week 9. I'm still continuing to alternate between days with my pesticide treatment (especially after finding that bug living on one of hulkberries fan leaf) and thrive alive green daily foliage spray as a prophylactic solution against any possible pests or mold going into these last few dog days of veg. I will flush them with distilled ph'd water for two days this weekend in preparation for flower. Then I'll start them on some "flower fuel" bloom booster on top of my secret for success flower recipe at 1/4 of the recommended strength. Outside of that still no adverse issue to report for the end of the 8th week. After my last trim, they both have responded very nicely, I was kind of worried about fat banana stalled growth. But one thing I noticed when I topped her at the 6th node, yes the main stem stopped growing but it developed many bud sites up and down every stem. Whereas hulkberry was topped at the 8th node, she has mainly focused on developing long stems and only 2 or 3 bud sites along her stems. Even though hulkberry in structure, is much bigger than fat banana and has a way bigger root system. Fat banana is bushier and has developed way more bud sites than hulkberry. I can't tell which strain will yield the most at this point only time will tell! Also, a big shout out to "J"@RQS, thank you for the excellent customer service. Another reason why Royal Queen Seeds is top 3 in breeding!!
Likes
6
Share
@Floryx
Follow
-I moved the tent next to my heater because temps were dropping and humidity went above 65% at night -removed the scrog net for convenience -besides that not much happened sorry for the few photos. Next week will be more detailed
Likes
32
Share
Week 1 New diary alert and I know This is your first time so.. welcome to my garden. Super excited to say I'm sticking with BARNEY'S FARM for this summer grow season. First couple entry's of these diary feel a little stale but this will be speeding up soon. If you have a question drop me a comment please ! Im new let me know what you think, help a brother out. Happy Growing everyone Cariboo_OG
Likes
4
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱
Likes
11
Share
@Ferelite
Follow
Week 4 Bloom 31/08 - Mass defoliation day, #1 was suffering from the amount of leafs it had, #2 was not as bad, has filled its own structure out nicely and outgrown #1. Flushed and changed water. Upped the liquid potash. Added a tiny bit of CMX due to #2 showing a slight magnesium deficiency. Switched from PSI to cyco silica due to running out of PSI. Humidity and temperatures have been near perfect, 28-38% RH and 20-25 degrees celsius, extra exhaust ventilation helped a lot.