I think I’m a little short on nitrogen, busy to fix the problem. Kings and Dj’s gold doing well, only have the problem with the Barney’s. The color is not dark green but getting whiter. Curly top leaves but soft, not to dry not to whet. Start giving plagron alga bloom sinds today 25% more then the alga grow.

I am only using tap water half soil half perlite no nutes no ph or ppm tester £70 led from Amazon.had problems earlier but realised that I had no ventilation so I drilled 3holes and put 2 fans facing backwards and put a air vent in the other and the seem to be loving it

Que pasa familia, vamos con la cosecha de estas Gorilla Cookies Fast Flowering, de FastBuds. Por dónde empezar, las flores son bien compactas , y van repletas de resina, tienen tonos por dentro muy bonitos, y tiene un aroma a galleta. Es muy sencilla de cultivar, es de ciclo corto mdio aunque también si le dais una semana más no pasa nada agradecer se agradece al final. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

This week ma humidity is bein sitting at between 70 80 think it’s coz of the space size of pots n how much am having to water the now

Started off germinating the Grapefruit and taproots showing at 05/06, planted directly into an Eazyplug cube w/10 L fabric pot + Freedom Farms seed starter. Red clovers were germinated the same time and thrown directly into the soil mix, those germinated and sprouted within ~7days for Nitrogen fixation into the soil. Had a G13 Labs Berry Auto which unfortunately has gone up to day 11 now with incredibly slow growth, might have been error on my part with a bit too much water + humidity. Sadly had to pull the small girl out since there was evidence of stress + damping off as the root j-rooted and then died after trying to correct this minor issue. Don't think I'll buy G13 seeds soon considering the Grapefruit had 0 issues despite germination being slightly slower than the Berry. The giant mycelium bag is a Co2 generator with some Shiitake mushroom culture pre-inoculated and colonized. Broke the substrate up a bit by squeezing the bag today so the mycelium fruit has more space to colonize in. :)

Trichomes are: 10%/80%/10% - clear/milky/amber Wet trimmed: 70gr (buds + stems) I hope for 15gr dry buds :) Drying them in a paper box with pc fan as output ventilation (around 24 degrees Celcius / 55-60 % RH)

The clones are doing ok. I might have the humidity to high because they haven’t had water this week, the soil is still moist from the transplant. Once the roots hit the bottoms of the pots they should spread out causing the foliage to explode. In week 8 I’ll come back and edit and tell myself I told me so. Happy growing folks

Coming to a close here with Tangie'matic. This grow has been so enriching! I decided to go outside of my comfort zone and head strong into the controversial world of topping autoflowers. Some people swear by it, others stand by their stance that topping an autoflower will destroy any chance at a decent yield by stunting the plant in its already limited life cycle. This plant has been a true partner throughout this grow process. I pushed with the top, she pushed back with buds. I pushed her again by changing her grow environment when I decided to prematurely move my grow tent into the basement. She stacked and fattened. When I traveled and let her house get too chilly, she tossed me a couple of foxtails to remind me that I need to do a better job. I responded with more environment correction and she rewarded me by finishing up beautifully.

Gave them there last shot of nutes @ Day 46. Gonna do 2 waterings with Canna flush and after that a only RO water dieet. They are coming close💪 Rock on Growmies 💚

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

ACOP does not care about all those caterpillers and spiders (and other slimy mofos)... She is just getting some highlights in her hair(and a perm!) .. to get ready for the harvest party soon!!👊 happy growing for all ✊

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁

Semaine 2 – Croissance Mother Gorilla On continue sur une bonne lancée avec cette deuxième semaine de croissance ! La plante est bien vigoureuse, elle a clairement pris du volume depuis la semaine dernière. J’estime qu’elle a quasiment doublé de taille, on est maintenant aux alentours de 15-16 cm. C’est un bon signe, elle se plaît dans son environnement et ça se voit aussi au niveau des racines : elles ont bien évolué en quelques jours, bien blanches et en pleine forme. Côté constantes, on reste sur 18h de lumière par jour. La température oscille entre 22-23°C en journée et descend à 18°C la nuit, donc l’amplitude reste raisonnable. Niveau pH, il a un peu bougé et est monté à 6, mais rien d’inquiétant. Je vais surveiller s’il continue de grimper, et si besoin, je le redescendrai à 5,8. Pour l’humidité, j’ai baissé légèrement à 70 %, et je prévois de continuer dans cette direction la semaine prochaine pour descendre entre 60 et 65 %. L’objectif est de garder un VPD entre 0,4 et 0,8 max, histoire de rester dans une bonne fourchette pour la croissance. Aucune modification sur la plante pour l’instant : je ne l’ai pas encore topée, je préfère lui laisser encore une semaine d’acclimatation avant de commencer le travail de structure. Même chose pour la solution nutritive, je suis toujours sur la même que la semaine dernière. Pour l’instant, pas de signe de carence ou de besoin particulier, donc je continue comme ça. En résumé, tout roule ! La plante est en bonne santé, ses feuilles sont bien larges, et son système racinaire est top. On va continuer sur cette lancée et voir comment elle évolue la semaine prochaine ! 🇺🇸Week 2🇺🇸 – Mother Gorilla Growth We’re still on track with this second week of growth! The plant is looking strong and has clearly bulked up since last week. I’d say it has almost doubled in size, now standing around 15-16 cm. That’s a great sign—it’s thriving in its environment, and you can see it in the roots too. They’ve developed really well over the past few days, nice and white, just the way we want them. As for the conditions, we’re sticking to 18 hours of light per day. Temperature stays between 22-23°C during the day and drops to 18°C at night, which is a good range. The pH has fluctuated a bit, sitting at 6 now, but nothing concerning. I’ll keep an eye on it—if it keeps rising, I’ll adjust it back down to 5.8. Humidity has been slightly lowered to 70%, and I plan to keep decreasing it next week to around 60-65%. My goal is to maintain a VPD between 0.4 and 0.8 max to keep things ideal for growth. No plant training yet—I haven’t topped it, as I want to give it another week to settle in before I start shaping it. Same goes for the nutrient solution—I’m still using the same mix from last week. The plant isn’t showing any deficiencies or issues, so I’m keeping things steady. Overall, everything’s looking great! The plant is healthy, leaves are nice and wide, and the roots are thriving. Let’s keep this momentum going and see how things progress next week! 🤘😎🤘

ROYAL QUEEN CBG AUTO ROYAL QUEEN SEEDS Week #3 Overall June 19th-26th Week #2 Veg This week no issues she's growing well medical CBD grow so it's a all organic grow. Stay Growing!! ROYAL QUEEN SEEDS ROYAL QUEEN CBG AUTO

- Day 50 The stretch seems to be slowing down a bit now, also seems like she is drinking just a bit less now, so hopefully we see those buds develop nicely from now on. Day 51 Renewed the reservoir today. Starting to get difficult with how big the roots have gotten 😅. I reduced the amount of T.A. tri-part I'm giving as I'm starting to add Big Bud from Advanced Nutrients from now on for the next 2-3 weeks. Day 52 pH got up to 6.4, I Added 1.5 liters of pH 5.5 water, which brought it the pH down to 6.2. Starting to see the bottom fan leaves slowly yellowing as she is using up all those stored nutrients to build the flowers. Day 53 I've noticed the nutrient burn on the leaf tips have gotten a bit worse. I've decided to fill the reservoir with just plain 6.0 pH water for a day to flush out the overload of nutes and will give a lighter mix again tomorrow. Day 54 After having given her just plain water yesterday I've given her a new reservoir with a lighter nutrient mix. Hopefully this will help with the nutrient burn. Day 55 Topped up the reservoir again with 1.5L pH 6.1 water. Seems like the nutrient burn is stable for now. Day 56 I noticed some brown spots on a few leaves on top, I figure they look like calmag deficiency due to the light being to strong. Noticed I was giving 50+ DLI so I reduced light intensity to 45 DLI, see if it stops the spots from spreading. Had to fill up the reservoir again with 1.4L. pH'd water to 6.3 as the water in the reservoir got down to 5.7, which brought it back up to 6.0.

7/27/2023- Prep Tent and system are cleaned and ready to go from my last grow. I have submitted my Journa for the Diary of the Month Competition here is to hopeing for good resutls. 7/28/2023- Germination Day 0- Seed initiation Well lets get this new Grow started.. So My Dad Sent me a custom Strain that he wanted me to grow out and Breed for him. The Strain is Called Red Rhino: Red Rhino is an amazing strain coming from Israel and boasts a 60% Sativa and a 40% Indica. This strian comes from crossing double gum and master kush. Effects are an increased appetite, as well as giving you ephoric feelings throughout the whole day. RO Water Used Added Hydrogen Peroxided 8/1/2023- Germination Achieved G-Day 1 Popped her head above the root riot today to say hello.. Woot first challenge when dealing with an unknown seed and a new Strain is getting the seed to pop and the lady to show life. 8/2/2023- Germination Day 2 Took the root riot out today and it was soaked not good plant drowing again. I am still having a hard time finding the right blance for where the water should be to keep the root riot moist and not soaked. I had to drain some of the water out of the root riot plug to help give a little oxygen. I also removed some of the water. 8/3/2023- Germination Day 3 Looking good stretching her leaves out to let in the lights 8/4/2023- Germination Day 4 Looking good a few days until I put them into the RDWC System and get this thing rocking and rolling. 8/5/2023- Germinaiton Day 5 Looking good will probably plant tomorrow if the roots are still looking good. 8/6/2023- Plant Day- Germination Day 6 Planted into the RDWC System today. Joy when they go into the system as long as we dial that in right this will now be a great grow.. Survived the hard part.. 8/7/2023- Germination Day 7 Fell over today I am worried.., she is showing some damage on the lower leaves from the over watering in the cloning machine but right now I don't see any new damage. Supported the Stems with little improvised pole to help her stand up. 8/8/2023- Germination Day 8 Added the first Nutes today, to help support root growth and to help give there first jump to growth. TPS SILICA GOLD-.5mil/Gal Root Drip- 1mil/Gal GH FLoraMicro-1mil/Gal GH FlroaGro-1mil/Gal GH FLroaBloom-1Mil/Gal ORCA-.5mil/Gal 8/9/2023 - Germination Day 9 Everything is looking good new growth looks like it is praying and they are looking happy. I will take off the damage leaves probably tomorrow. 8/10/2023- Germination Day 10 Everything is looking good looks like she is recoving well, with just a little bit of a delay. Cleaned up the dead leaves... Day 1 VEG tomorrow.. Water Change Day and first real meal...

Day 42 to 49 We are getting closer to an end. Is the second time I’m growing purple genetics and I can say that somehow look to be faster to finish their life cycle; I think the next week will be the beginning of flushing, so I will just give water at PH 6.5, without any fertilizers, till the end which I believe will be around day 65. Let me know what’s your experience with purple genetics and of course if you have some tips! Cheers 🍻