Likes
Comments
Share
04/01 - Both took a light PH imbalance due to user error - Since they both have been flushed and are rebounding accordingly - Will continue clean water feed only until numbers have stabilized accordingly. 04/08 - Lost some of the green due to the PH imbalance but since flushing and restabilizing their PH the yellowing has stopped and their green is coming back - Nute feeds have started again but in smaller numbers to neutralize the PH and avoid anymore burn. 04/11 - They are recovering accordingly - Has to flush again to counteract the PH imbalance - I was able to stabilize her PH and kept her PPM/EC where they need to be.
Likes
19
Share
This was a good week to learn a few things about what I want to do for the next grow. This grow, I let the ladies grow to 5 nodes before topping to the third - next grow, I would top to the third when the 4th is clearly visible. I am about 1 week behind schedule, waiting for the nodes on the mainline to grow so they can be topped again. Going to top them into 8 main cola’s. Reduced water in the buckets to 7l so that the roots have to work a little harder because Cheech was showing signs of being over-watered. Lights remained at 60cm about the plants, 1ml of all nutrients per litre of water.
Likes
2
Share
So I just chopped the plant today. About 10% amber and 80% cloudy. Smells like candy! Very sweet and sticky. I stunted the growth by topping her a little late and transplanting—- yes I know about autos. But she took it and grew very short but mighty. Pretty pleased with the quality. Guessing 28 grams dry— drying right now. ✌️🏻💚
Likes
3
Share
@CalGonJim
Follow
2/16, 10:28 AM. I got a little distracted with my vegetable garden and some more movie props looks cool though. 2/17 9:34 AM. My EC was high on these plants so I took it down. to about 1200 on banana and I’ll try and get a lower on OG triploid she’s just great. I used water with EC at about 970 going in and I used a whole gallon on each until the EC coming out was 1280 on BPP and still 1700 on OG triploid. Responding very well right now. I did it about an hour ago and the resin on OG.Triploid is just incredible and banana purple punch RF3 by fast buds. She’s throwing out very thick pistil formation much more than I usually see. She’s still behaving like a flower and 7 to 8 week a lot of pistils formation lotta flower growth she is not slowed down and the flush today darted her growing again.👍
Likes
31
Share
2024-07-20 I'm focusing solely on the Indoor Girl in this report. The Outdoor Girl will receive a separate update once she shows more signs of flowering. This week's photos showcase the Indoor Girl's journey from start to finish, and she's been an absolute joy to grow - truly an easy-going plant. I'm fascinated by her structure, which boasts a perfect ratio of leaves to buds. Remarkably, I never had to remove a single leaf to improve light exposure. I only topped her twice to open up the canopy. She grew vigorously and effortlessly, requiring just some nutrients and top dressing to keep her happy during the transition to flowering. Her daily water intake was consistently around 1 liter minimum, with only four feedings throughout the entire growth cycle. The result is a plant crusted with trichomes - glittery and gluey, perfect for extraction. Harvesting was a breeze due to the ideal leaf-to-bud ratio. I've kept her remains and continue to water and feed her in an attempt to revegetate. Meanwhile, her outdoor sister is thriving in a hot and sunny environment. I adore her aroma profile, which features only the most pleasant terpenes. The scent is reminiscent of various citrus fruits - pink grapefruit, orange, mandarin, and tangerine - with a creamy touch that's reminiscent of a delicious dessert. There are also floral notes of lavender. I'll continue documenting the Outdoor Girl's progress here. I'm certain I'll grow this strain again, as it has proven to be stable, well-composed, superbly structured, and delicious. Well done, Seedsman!
Likes
31
Share
2024-09-07 This was a very effective Week, it started with Rain an Wind then it turned over to very hot and sunny exactly what we need here. The Outdoor tangie still looks super fresh and green, only minor signs of getting ready the colas are very glitery and you see alot of potential already super frostyhere. the revegetating Plant looks fine too. she produces some flowers.too.
Likes
50
Share
@AsNoriu
Follow
Day 82. Its 81 day from seed touched soil ! If leaves would be healthier, i would run them at least one more week, but it is, what it is. They spent 24 hours in darkness and now its Trim Jail !!! ;))) Harvest Day ! Day 88. Tried bud from each, clearest weed straight from drying rack ! Only 3 feeds makes huge difference to harshness at the beggining. Still Queen is pure Tangie, can it be seed mistake ? ;))) Day 89. Boy i am f@ckingly surprised !!! Heather - I love You, Your team, Your strains !!!! I still don't get how, but numbers are amazing, Thank You very much !!!! Will update this diary as cure goes, but i feel so many nice words were unspoken, felt that FB will change my view about Autos - and they DID !!! Amazing house ! Happy Growing !
Likes
14
Share
41F - Seriously putting on some weight now! Pistils are just now starting to turn orange/brown. The un-topped WWBB has a massive main cola, but the topped plants are looking pretty good as well.
Likes
200
Share
@Ferenc
Follow
Day 65, 14th of November 2020: Amazing week.... RQS Wedding Gelato does not strech a lot and pistils coming out nicely.... Original Sensible Seeds has amazing gentics they are so strechy except Black Ghost OG, rest of them crazyyyyyyy..... I also broke two of the sides from Gelato Original Sensible Seeds but fixed with tape and now all good lol 🤣🤣🤣 Pre flowers out and I really hope they stop growing lol. I also noticed that the Original Sensible Seeds strains have nice purple colours of the fan leave's stem. All the same fertilization happens every 2nd day with the mix above and ratio. One more thing: I set the lamp 15 minutes shorter to switch off earlier so they receive 11:45 of darkness. I would like to imitate the nature when longer nights come with time till the 4th week (when they will receive 13 hours darkness a day 15 minutes minus 4 times = 1hour) so every week 15 min longer darkness for 4 weeks and then back to 12/12 to have bigger buds from the 4th week....
Likes
22
Share
Another solid week! I decided not to do a "hard" LST with these two.... I'll do some to open them up a bit but I'm going to let another grow go more naturally! They both grew a lot this week.... Chloe is 10 inches tall and Sofie is 8 inches tall... I watered them twice this week with 1.5 cups of water each time... I'll be moving them into the 4X4 flowering tent during this next week... I'm about to sow 2 Fast Buds Bruce Banner seeds... This will be the third and last grow in the start of my perpetual garden... State law dictates only 6 plants at a time... Anyways, on to another great week... cheers!!
Likes
27
Share
@ohserp
Follow
So far so good. Got some pre flowers coming in and everything is growing pretty steady. Increased nutrients this week so gonna keep an eye out for anything funky.
Likes
110
Share
@FoTwenny
Follow
⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️ ⏭️ WEEK 7 - BLOOM ⏮️ ⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️ ⏭️ Sept.19 - Sept. 25 ⏮️ ⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️ 🙋‍♀️Fo' Twenny here!🙋‍♀️ Back with another update on our Grandaddy Purple cultivar from breeder Blimburn Seeds! It's week 7 and all is looking great! She is getting super frosty and starting to present some really nice purpling. She smells of fuel right now. She is incredibly resinous and frosty! She was great the first time I ran her, but she is on a whole other lever under these quantum boards! This is going to be some very potent medicine! Now on to the details! ________________________________ 9/20 - Day 44 of Bloom: 🚿FEED DAY!🚿 She received approximately 3.25 gallons of nutrient solution. Of 10 gallons mixed, 36 oz is divided by 3 autoflowers and the remainder of the solution was shared by 3 plants. 👩‍🔬NUTRIENT SOLUTION👩‍🔬 ⬇️Mixing Rundown⬇️ 12 oz tap H2O run through x2 KDF filters Start ppm 630 Start ph 7.8 .5 tsp/gal Fox Farm Gringo Rasta Cal-Mag 1.5 tsp/gal Fox Farm's BIG Bloom 1 tsp/gal Fox Farm's Grow Big 1 tsp/gal Fox Farm's Tiger Bloom .5 tsp/gal Fox Farm's Kelp Me Kelp You 1.5 tsp/gal Fox Farm's BEMBÉ .125 tsp/gal Fox Farm's Cha-Ching pH: 5.8 I always make sure pH is in the range of 6.0- 6.6 prior to adding any microbial innocclants. pH already in range, no adjustments needed. Add 5 tsp of pH up pH: 6.1 1 tsp/gal Grower's Choice Recharge .6 ml/gal Mammoth P. pH: 6.3 PPM: 1430 ________________________________ 9/23 - Day 47 of Bloom: Photoshoot and filming! 📸 Some light selective defoliation. 🌿 ________________________________ 9/25 - Day 49 of Bloom: I have been regularly checking the moisture 💦 level in my medium and she still isn't quite ready for her next watering. Based off where it's at now, I will plan to water tomorrow. _________________________________ Want to see all the strains I have running? Please check out my other diaries & give me a follow! Happy growing my friends! ☺️🌱 Thank you for stopping by my garden! Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 - Fo' Twenny
Processing
Likes
11
Share
Coming along nicely. Large number of bud sites, starting to grow but still far from mature. Nice aroma every time I open the tent. Starting to become a bit frosty.
Likes
8
Share
@Kirsten
Follow
26.12.24: These are my 2 best plants P1 and P2 Purple Punch, they are looking great! Not sure what happened to P3. They are in early flower/ pre-flower with the pistils clearly seen on P2. I am also hoping to tie some of the branches down to help light penetration on the lower canopies. I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
1
Share
Male and female preflowers showed this week. I waited a few extra days just to make sure the balls on the male were indeed balls. I chopped the male but did keep the female and defoliated her and continued LST. I increased the tension on the plant ties, pulling them further to the sides so that the inner plant would be exposed, getting those nodes in the air and light. I removed about 10% of the leaves, started at the bottom then worked up to the upper canopy, only removing fan leaves that were blocking the light to nodes that need it. I began feeding some FF Big Bloom.
Processing
Likes
10
Share
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂