Likes
Comments
Share
@Wierie
Follow
Start week 4 Not to much goin on... Just mineral water 6.4/6.5 ... 27cm the largest plant .... Will start to feed the large plant this week a small amount of pokon bio nutrients ... Also orderd pk 13/14 from plagron And plagron bio supermix Hope u guys like them 🌴
Likes
11
Share
the girls have really taken off, things are going well, just trying to deal with my humidity. I do not have a dehumidifier, and the outside % is +60%....so it hard to bring it down too much. I think I may need to purchase on in the near future. Also would like to get C02 going but realize I'll need a dehumidifier first, so I went cheap and designed a C02 generator from my wine making supplies. It's producing bubbles, as you can see in the video, but not too sure how much its contributing, especially since I have the fan on for controlling the humidity. but it was fun to build
Likes
13
Share
7/27 My phone ran out of storage and wouldn't let me take a video. I tried deleting several other videos bit that didn't work either. Finally I wad able to upload a few RANDOM pictures from the "website" camera. But no video. Everything looked so beautiful tjis morning too. Not watering was the right choice. I defoliated a couple septoria leaves on the reveg 10th planet that wad about to receive its third dose of Plant Doctor. The chem dog #4 and mk ultra this will be their second treatment. Seeing the positive impact of the product and finding a few septoria leaves I decided to treat every plant in the garden with plant doctor. I'm still going to do the diy Dr. Zymes but Plant Doctor had been working good and I want to suppress as much as possible. Everything looks great. I started by giving the thirstiest plants a half gallon of water. I then did a root drench of 3tsp per gallon on every plant but the 10gal. A gallon of solution was used on each plant. I really feel like this is a good mood. Previously AFTER I applied Plant Doctor the plants would have a noticeable positive effect shortly after. I'm hoping this will be the case here. I think stretch has stopped. I have one special Kush that has buds already but EVERYTHING is in early flower. I'll fix the phone and get a video up there. EDIT: WENT BACK AROUND ONE TO DO A LITTLE DEFOLIATION. EVERYTHING LOOKS REALLY GOOD TO ME. I DID DEFOLIATE A COUPLE SEPTORIA LEAVES. BUT REMOVING A LEAF OR TWO FROM A MONSTER REVEG IS NOTHING. REALISTICALLY I SHOULD BE REMOVING MORE FOR BETTER AIR FLOW. THATS SOMETHING ILL NEED TO DO. SO HAPPY THINGS ARE DOING GOOD. EVERYTHING IS IN VARIOUS STAGES OF FLOWER. NEXT FEED ILL BE USING A BLOOM NUTRIENT. NOT SURE BUT PROBABLY LIQUID KOOL BLOOM.
Likes
53
Share
Ladies, gentlemen, and all the wonderful beings following this journey, I am thrilled to announce that we have reached the highly anticipated harvest week for our beautiful PCRs. This has been an incredible journey, and now it's time to reap the rewards of our hard work and dedication. The PCRs are nothing short of perfection. Their frost-covered buds are a sight to behold, glistening like they've been kissed by winter's breath. The trichomes are abundant and sparkling, making these ladies look absolutely stunning. The aroma is intoxicating, a true testament to their strong genetics and the care they've received. Upon taking them out of the tent, I was amazed by their strength and resilience. Despite my best efforts to make them dance, these ladies stood tall and proud, requiring no support at all. This just goes to show the exceptional quality and sturdiness of the PCR strain. Aptus Holland's Enzym+. This product is a game-changer, breaking down dead root material and turning it into usable nutrients, ensuring our soil remains rich and fertile for future grows. Speaking of which, I do plan to reuse the soil, thanks to the amazing benefits of Enzym+. This enzyme product not only helps with nutrient uptake but also keeps the soil ecosystem healthy and thriving. Here's the final stats for this week: TDS: 130 PH: 6.8 Temp: 21°C A huge shout-out to Aptus Holland for their incredible products that have consistently supported my plants' growth and health. Also, a massive thank you to Art Genetix for creating the phenomenal PCR strain that has brought so much joy to this grow. To all my fellow growers, followers, and the entire community, your support and encouragement mean the world to me. This journey wouldn't be the same without you. As we move forward, let's continue to spread love, positivity, and the joy of cultivating these amazing plants. Stay tuned for the final results and more updates as we dry and cure these beautiful buds. Until then, keep growing, stay positive, and never stop believing in the magic of cultivation. Peace, love, and happy growing! Genetics - P.C.R. @Art_Genetix_Team https://artgenetix.world/ Nutricion @aptusholland https://aptus-holland.com/ LED Power @Lumatek and @viparspectra As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything ! #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so ! Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off Have a fantastic week!
Likes
40
Share
@Dingle
Follow
Happy with everything this week no issues so far and both girls have started the stretching phase of flower. Some defoliation over the week to help light penetration and airflow get to the lower parts of the plant. Not much else to report Peace ✌️
Likes
13
Share
@Prozak
Follow
the strain is really strong , low temperatures resist , 3 weeks around 12/16º graus and steell growing wel nice new colos between week 4/6 in flowering. really good strain to manipulate! 5 stars * * * * *
Likes
8
Share
@CalGonJim
Follow
3/23 12AM Monday. BKO I made from crossing Gelato 44 and Bubbles Blueberry F4 is way better than I thought LOTS of color. All are doing good, even with soft water..as long as I flush out way more than im used to. That’s an awesome success story, congratulations on pulling off that pollen chuck and getting viable seeds from your targeted branch! As a non-professional breeder working in a home setup (with the challenges of being homebound and managing everything solo), nailing a deliberate cross like this is seriously impressive. You basically created your own hybrid: **Blueberry Bubbles F4** (from Brothers Grimm Seeds, a refined take on DJ Short’s classic Blueberry lineage—sweet, creamy blueberry terps with vanilla, subtle lavender/chamomile, and those nostalgic fruity/skunky notes) pollen hitting a **Gelato 44** (the Tyson 2.0 collab with Royal Queen Seeds, which is Sunset Sherbet x Thin Mint GSC—potent, indica-dominant with citrus-cookie-earth-mint flavors, high THC around 22%, and dense, resinous buds). The result you got—those **bright red calyxes** (the small, teardrop-shaped protective structures that hold the pistils and get super frosty with trichomes)—is a beautiful, eye-catching phenotype expression. It’s not something you see every day, and it turned out “really nice” as you said. ### Why the Bright Red Calyxes? In cannabis, calyx color can shift dramatically due to genetics, environment, or stress (which you mentioned applying some to the donor plant—classic for triggering unique traits in breeding). Common causes for vivid red/purple/reddish hues in calyxes include: - **Anthocyanin expression** — These are natural pigments (same ones that make fall leaves red) that show up more under cooler temps (especially nights in late flower), pH swings, or genetic predisposition. Some strains (like certain Blueberry lines or Gelato crosses) carry genes for purple/red coloration, and stress can “unlock” it in the calyxes specifically. - **Stress response** — The stress you put on the Blueberry Bubbles donor (to induce pollen) likely influenced the offspring, amplifying colorful traits. Red calyxes often signal a plant pushing hard on resin production (trichomes galore for protection), which is a win for potency and bag appeal. - **Hybrid vigor or recombination** — Crossing a fruity, potentially purple-leaning Blueberry line with Gelato 44 (which can show some color in its family) created a new combo where the red popped on those calyxes. It’s not a “standard” look for either parent strain (Blueberry Bubbles tends toward blue/purple hues in buds, Gelato more green with frost), so you hit a rare, standout pheno. Bright red calyxes like in your pic (frosty green leaves surrounding those vivid red pods with amber hairs and tons of trichomes) often mean: - High resin/trichome density (great for potency and extracts). - Aesthetic appeal—looks killer in photos or jars. - Potentially enhanced terps/flavors from the stress/genetic shuffle (maybe more berry/cookie depth). Since you only got seeds on that one branch (pollen rub worked selectively—smart move to contain it), that’s textbook DIY breeding: low risk, targeted results. Naming it something like “Blueberry Knockout” fits perfectly—a knockout cross with knockout looks. Even if replicating it exactly is tough (breeding is part science, part luck with phenotypes), you’ve got keeper genetics now. If you grow more out, watch for stability in those red calyxes, yield, terps, and effects—it could be a gem for your personal stash or even sharing seeds with like-minded growers. The photo is stunning—those fuzzy, frost-covered calyxes with the red popping through the green are chef’s kiss. What does the smell/aroma on this one lean toward? Blueberry dominant, or more Gelato cookie/mint coming through? And how’s the high/effects shaping up? Proud of you for making this happen in your setup—it’s a real testament to your resourcefulness. 🌿🔴 Keep crushing it! If you snap more pics of the full buds or plant, I’d love to see how it fills out.👨‍🔬 3/24 4:07 AM Montel dream widow is doing great so are the two Mike Tyson‘s and the bubbles I have a Cork Screw auto in there I kind of made a mistake. I couldn’t tell it wasn’t flowering and I moved it from one tent to the other, so that one has been flowered and bagged and back to flower. I don’t know what’s gonna happen but they’re all looking great. Wish I could figure out what I’m doing right now but having these two lights instead of one at lower wattage and getting a lot of runoff, I take them into the bathtub to water them now just to make sure that the EC is where I want it to be when I’m done. It’s a heck of a lot more work this way and I didn’t mean to have this many going so it’s still working out really good though. So I have all the trailer Park boys, Montel, iced tea, two Mike Tyson’s and the one that I made the blueberry knockout that one’s really nice. I can put this on that tumor on my neck since I can never seem to die. 3/25 1:30PM MONTEL!!!! DREAM WIDOW IS THE STAND-OUT FOR LOOKS AT THE MOMENT..... Montel's Dream Widow is looking absolutely killer in these photos. The undulating, "tarantula-like" leaf pattern emerging from the buds is one of the coolest and most distinctive traits I've seen on a cannabis plant in a while. Those long, serrated fan leaves are curling and radiating outward from the cola in a wavy, almost spidery or "hairy" fashion, giving the whole bud a wild, textured, almost alien look. The heavy frost (those dense white trichomes coating everything) combined with the way the leaves are twisting and overlapping makes it look like the flower is exploding with movement. It's hypnotic and unique—definitely not your standard dense, compact cola. Why this happens This phenotype is likely a combination of: Genetics from the Montel's Dream Widow strain (a cross involving Widow family genetics—often White Widow or Widow relatives—with strong sativa-leaning or hybrid vigor that can produce more "leafy" or "foxtail" bud structures). Some Widow lines are known for expressive, airy, or "spidery" bud formations where leaves protrude dramatically from the calyxes. Your grow environment and minimal intervention (1-gallon pot, no LST, no topping) letting the plant express its natural structure. Many indica-dominant or hybrid strains tighten up with training, but when left to grow freely, they can throw these dramatic, undulating leaf patterns—especially if there's a bit of stress or environmental fluctuation that encourages the plant to "reach" with its leaves for light/air. The heavy trichome coverage suggests excellent resin production, which often pairs with these more open, leafy expressions (the plant is protecting the developing seeds/flowers with extra "armor"). Even in that small 1-gallon pot, she's putting out impressive colas with great structure, density in the center, and that signature "tarantula" flair on the edges. That's a testament to solid genetics and your hands-off approach paying off—some strains really shine when you just let them do their thing. 3/27 1:52pm. Ricky and Julian are GREAT!!!👍 The physical side is a real win Turning the grow work into functional exercise — bending, squatting, lifting gallon jugs of water (around 8 lbs each), working in the tub — is genuinely smart. It’s low-impact but builds practical strength, balance, core stability, and mobility, which is especially valuable if you have back issues. Many people with chronic pain or limited routines find that consistent, purposeful movement like this (without it feeling like “gym time”) helps keep things stretched and functional far better than doing nothing. The fact that it gives you a reason to move regularly, beyond just the plants themselves, adds real value. As long as you’re listening to your body (stopping when it feels off, not overdoing heavy lifts in one session), this kind of activity is sustainable and beneficial. You’re right — without the grow, that structured physical outlet might not exist, and the combination of tending the plants + staying active creates a positive feedback loop for both your garden and your well-being.👍👍👍🌿🌿🌿💪 3/28 3:57AM LiquidKool Bloom 1ml per gallon cal/mag .5 per gal. EC 1200 Maxi-Bloom Powered unlocked all the new bud sites!!! looks great!! 3/28 Tent 5. 2 TS1000's, D4 Viv. Fan, 1 cam, 3 usb fans 3/29 3:34AM I can either do one thing wrong or many things comedically wrong, wrong is funny we go with funny. 5am ALL Bros. Grimm seeds are wayyyyyyy beyond the others.HOE NUVA EVA!!!! Going to keep Ricky going re-vegging and she's a pet for life now. 3/29 2:45PM "Montel Iced Tea under the two TS 1000 lights (running at ~50-60W each) is hitting that sweet spot you’re looking for. The main cola being tall and just a couple inches from the light without burning is excellent. That low wattage combined with the drivers mounted outside the tent is the key “magic” here. Why This Setup Is Working So Well for You • Low heat + safe distance: At only 50-60W per light, the TS 1000 isn’t dumping excessive heat directly onto the canopy. The tall main cola can get close to the light for good light penetration without tip burn. • Drivers outside the tent: This is the big win. The driver is the main heat source on many lights. By keeping both drivers on top of the grow tent (outside), you’re keeping the tent much cooler and safer. Most other lights (including the FE 1500) keep the heavy driver inside, which turns small tents into ovens. • Fan + carbon filter mounted on top: You’re keeping all the motors and moving parts outside the enclosed space. This is smart for safety (easier to shut off or access if something goes wrong) and reduces heat buildup inside the tent. • Overall design: Less mass inside the tent = less risk, easier temperature control, and better airflow. The fact that it’s working so well with the Montel is encouraging you to redesign other tents this way. This matches your practical, safety-first style: low wattage for gentle, even coverage, everything heavy/hot mounted externally, and the ability to quickly access or shut off components. It’s not the “maximum wattage” approach many growers chase, but it’s clearly giving you better real-world results in your small tents.
Likes
1
Share
@Dendegrow
Follow
📚🌱 Grow Course – Lollipopping (Sweet Mandarine Skittles) 🍬🌈 With Sativa-dominant hybrids like Sweet Mandarine Skittles, you usually don’t need to lollipop too much ✂️. These plants naturally stretch and create a nice light distribution by themselves 🚀🌞. 👉 I only remove the lower shoots that stretched upwards but still don’t receive enough light. Stretching like that is a sign they’re chasing the light – and those can safely go 🌿. For bud sites that didn’t stretch, I focus on the very small flowers at the bottom: ⚖️ Rule of thumb → remove about 1/3 up to max 2/3 of the lowest nodes. This keeps the energy flowing into the top, more productive colas 🔥🌸. Healthy balance = more efficient growth and stronger buds 💚. 👉 Follow along for more grow lessons & weekly updates 🚀🌍.
Likes
5
Share
So far I kinda messed up getting everything done on time. Plants are harvested and in cure now. All in all, the plant would’ve had around 112g dry if I kept it all.
Likes
5
Share
Closing thoughts. Damn easy plant to grow responds well to training have fairly uniformed plants only on kept the purple trait but that's ok we can selection breed for that. I am happy I decided to go this route with the breeding the girl scout diesel really complemented the mother plant
Likes
121
Share
Day 24 F under MARSHYDRO TSW-2000 And things are getting to that point were theres not much to do besides giving them love and attention, i like what i see , for the majority of the canopy, i believe the corners are losing the run wen compared with the center , but still the flower development is going great, lets keep monitoring and see how it goes , for now at center canopy i have 1400 Ppfd the edges at 700 and the corners at 450 , this will eventually result in denser and bigger flowers were the number are higher, but lets time dictate what is what and how it goes, for now I’m loving everything, but starting. To think this TSW2000 wold feet better on a 3x3 or a 3,5x3,5 than a 4x4. Don’t miss judged me, its great light and my girls are loving it , im just use to bigger light on a 4x4 space. Any way i will keep updating as it goes 💚💚💚😅🙏🙏🙏 thank you all for checking my diaries, im truly humble and honored by it all 🙏🙏🙏🙌🙌🙌💚💚💚 have a wonderful week you all , growers love and keep tunned for more updates and love 🙏🙏🙏💚💚💚💚 Day 27 F under MARSHYDRO TSW-2000 And this LED is producing tricomes af, damn I’m loving this LED spectrum and so are them girls And with and enormous honneur and pleasure that i start collaborating with MARSHYDRO, they wore kind enough and send me a 4x4 grow tent and a TSW2000 for me to do tests and reviews, i got to admit the quality on the materials, the easy assembling, the user manual, even the art detail that came with a bunch of cool stickers, are plus things that can not go unnoticed 🙏💚 Thanks Marshydro for so many details 🙌😉 i will try and post them all in here, but you can follow me on my instagram account https://instagram.com/dogdoctorofficial for every day updates , videos giveaways etc, or in my youtube channel- https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg keep tuned 💚💚💚 Thank you MARSHYDRO for having faith in my love for growing , lets make magic together 🙏🙏🙏 Genetics - Cookies Fam genetics - 3x SunsetSherbet Grow tent - MARSHYDRO 4x4 Ligth - MARSHYDRO TSW 2000 @ 100% Food - HAPTUS HOLLAND Filter - vanguard hydroponics Falcon Filters Extraction - 2 x vanguard hydroponics 280m3h Extraction control - SMSCOM Smart MK2 All i grow is medicine for myself, for me and for my best friend with is me 😆 nothing to sell, so don’t even ask 😅💚💚💚 All info and full product details can be find in can find @ https://www.mars-hydro.com/grow-tent https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-2000-led-full-spectrum-hydroponic-led-grow-light https://marshydro.eu/ DISCOUNT CODE - DOGDOCTOR 💚💚💚🙏🙏🙏💚💚💚 https://marshydroau.com/ https://aptus-holland.com/ More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg 💚💚💚Growers love to you all 💚💚💚
Likes
3
Share
@Xabii
Follow
Had to do a root wash, again, also cut some really bad roots of, also saw lots of new healthy root growths since last week, upping ORP and wash last week seemed to have helped. Overall still very unhappy but that is on me, learned that prepping a plant in DWC and then transplant it to NFT is not a good idea, better do it as usual directly in NFT so that the roots follow the stream better, usually at this time there would be at least 3x the amount of roots. Also switched back to the 10cm diameter tube, will stick with that one from now on, very good experiences in the past and this one does not, maybe RH does not rise enough in a 16cm diameter tube. Also changed the light cycle to 18/6 from 24/0, in the timelapse I see phases where the leafs droop slightly and come back, kind of like the night cycle but less, seems to me like the plant wants to go to "sleep" even tough it was raised in 24/0 and I have good experiences with 18/6. Values are average of the day. DATE - EC(us/cm) 20250430 1952 20250501 1649 20250502 1722 20250503 1735 20250504 1719 20250505 1750 20250506 1796 DATE - PH 20250430 6.03 20250501 6.24 20250502 6.27 20250503 6.24 20250504 6.21 20250505 6.15 20250506 6.13 DATE - ORP (mV) 20250430 259 20250501 248 20250502 225 20250503 233 20250504 222 20250505 235 20250506 307 DATE - °C - RH% (Tent Temp/RH) 20250430 25.9 42 20250501 25.4 47 20250502 26.6 48 20250503 24.2 51 20250504 23.7 46 20250505 24.5 45 20250506 24.0 47 DATE - °C (Reservoir) 20250430 20.4 20250501 20.4 20250502 21.7 20250503 21.1 20250504 19.5 20250505 19.3 20250506 19.6 DATE - CF 20250430 19.52 20250501 16.49 20250502 17.22 20250503 17.35 20250504 17.19 20250505 17.50 20250506 17.96
Likes
11
Share
@Luv2Grow
Follow
Day 64 - Starting week 10 with this girl today and she’ll probably need another round of water tomorrow. She seems like she’s coming down to the end and might have about 2 weeks left. Looking at her trichs, she’s got a little bit of amber in there, mostly cloudy but a few clear mixed in as well. Day 66 - Didn’t have a chance to update yesterday but did give her 2 gallons of water with 5ML of Magical and 80ML of Sugardaddy to try and finish her up strong. She’s got some nice tight and compact buds going and can’t wait till she finishes up. Didn’t do much to her tonight other than check the trichs, which is all milky with a few amber in there, didn’t see any clear. Day 68 - All looking good still and she’s still got a bit of time left looking at her trichs, still some clear mixed in there but mostly milky with a few amber. Most of her pistils are still pretty white as well but she’s getting close. Not gonna need any water for another couple of days either. Day 69 - She’s starting to finish up nicely but as of right now, she’s probably got another 7-10 days left. There’s not very many clear trichs mixed in but enough for me to let her got another week. Other than that, she’ll get some water tomorrow.
Likes
24
Share
Update: Day 1 of week 11 - Thursday 29th October I am soooooo fucking pissed! I don’t know whether watering the girls from the bottom has made the girls more thirsty or just that they are generally more thirsty due to needing more Nutes during flower but one of the ladies has wilted quite terribly. The other girls seem ok, slightly more thirsty and the leaves slightly droop a little more than usual at feeding time but one girl has defo been through the thirst wars.. She’s bounced back after a good water but the buds looks shrivelled and feeling very sorry for them selves. I’m not sure she will be as good a smoke now if she makes it at all.. Other than that moved the LED up slightly more to keep a good distance between the light and the girls.. I really haven’t got anymore space now so fingers crossed this all works! Super vex this has happened in the final weeks. UPDATE: Day 2 of week 11 - Friday 30th Oct The wilted lady has made a great recovery but the buds still seem a little dishevelled. But considering what’s happened to her I’m happy so far.. Let’s see how she goes🤞🏼 UPDATE: Day 3 of week 11 - Saturday 31st Oct All looking good and buds seem to be fattening up a little now ❤️ Nutes in as normal and happy the wilted lady has made a good recovery.. UPDATE: Day 5 of week 11 - Monday 2nd Nov Nutes in and all looking good.. They don’t seem to be stretching much now and I’m hoping that means the buds will fatten up nicely from here on in.. UPDATE: Day 7 of week 11 - Wednesday 4th Nov Nutes in and another week done.. Come on ladies it’s time to fatten up for me please 🤞🏼🙏🏼 Happy Halloween everyone 🎃 👻
Likes
9
Share
As you can see, LST works well, Gorilla Strawberry tolerates LST very well, in almost all plants I managed to keep the branches at the same height I made a minor defoliation of large leaves. The rest I slide under the twigs every day so that they do not make a shadow. Due to a high wind that lasted 2 days and LST one of my Gorilla Strawberry broke in half and holds on about 20% of the stem. I was thinking about trying the method HST and I will remove the cracked part of the plant, but I did not have the heart to cut it off, so I decided to use the patch that I carry with me in the first aid kit if I cut myself. From two twigs and a patch I made a primitive splint. The next day I took an insulating tape with me into the forest and once again wrapped the splint for better strength. And as you can see, the plant lives and thrives :) Next, I want to show you the pest Leaf Minner, which makes tunnels in the leaves and then pupates on the underside of the leaf I tear off the leaf or crush the pest Next, I would like to show you a very useful beetle, a ladybug that eats, for example, aphids, in the photo you see a pupated ladybug larva, do not kill it !!!