Hey everyone 😃. This week they have become more and more beautiful 🤗. The smell that wafts through the room is very sweet and delicious 😍. They absorb their food very well 👍😎. This week you will get the full power of flower fertilizer again. I now had to start supporting them so that the shoots would not bend 😃. Have a nice week, stay healthy 🙏🏻, and let it grow You can buy this Strain at : https://greenhouseseeds.nl/ Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0

4/15/25 Things are progressing nicely. Some plants dont seem to be doing too much but 3 of them or so that are really standing out. Im curious if some of these are going to be longer flowering time than anticipated with the very obvious sativa dominant plants.

This cycle was all along a great pleasure. The plants developed MUCH BETTER THAN EXPECTED, the result under the Q6W-Gen. 2 LED lamps from SANlight is FANTASTIC. I have NEVER harvested more from plants of the same strain under HPS and the quality of the bud (trichomes, taste aroma) is MUCH BETTER when grown under LED, my decision is definitely made, I will continue to solemnly grow with LED-lights in the future. I harvested 2250 gram of Shiva Skunk and 3009 gram of Serious Kush, that a total amount of 5259 gram. In relation to the 3000 Watts (incl. dimmed part!) power of the LED-lights thats an AMAZING 1,753 gram per Watt.

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

Hello. I'm starting my Dos Si Dos #33 diary here. These clones have been growing in the veg tent all summer. I had stuff growing in the greenhouse all summer and it gets really hot in that cement room in the middle of summer, so I shut down that grow room till now. I got it up and running last week but I was a little embarrassed to make a diary starting last week because I had treated the clones badly and they looked rather leafless. They look much better this week, so I'll start. I would like to start playing around with making feminized seeds. So, I need some extra clones to spray to make the feminized males. I've read about it, now it's time to try. Some of these clones I take will be turned to males next year. I gave some clones to my friend Jerry for his summer crop. I was over to his house the first week in October, to take pictures of his plants. Some of the lower plants that were not getting sun anymore were just starting to show some powdery mildew on some of the big fan leaves, so he decided to cut them down. He did a real good job on growing them this year. I think he said he was going to cut the big bud off the ends of the branches and let the smaller buds fatten up, under cover, in the sun, on the deck. This is the strongest plant I grow. It gets me pretty baked with 5 or 6 tokes. It grows on the taller side, so I'll make lots of tops to slow the growth down. And it tastes like fruity ice cream!!! Yummy!!! The other plants in the room are Amnesia Lemon by Barney, Pink Kush the original clone I found 27 years ago, Nova OG by Anesia Seeds, Sweet Sensations by Sweet Seeds, The White (Whitey) by Dr Greenthumb. I will put in next week more Fat Freddie's Cat cartoons and I have some more puzzles to finish off that puzzle book. Then when that's finished, I'll put in some Fabulous Furry Freak Brothers cartoons. Man, the spiders are getting big around here. We've had 1 mm of rain in 3 months and it's very warm for this time of year, so they are getting big!!! Keep Growing Straight. Chuck.

12/15: Some plants are taking too long to transition and stretching beyond my space constraints, so I dialed the photoperiod back to 12/12. 12/16: Fed today and rotated edge plants. Added another 150w of 3000k below the canopy. Sucrose Overdose and Muscadine Wines are still stretching...raised lights again. 12/17: Worked on ventilation...no A/C necessary now, as I'm using another AC Infinity 6" fan to intake outdoor air into the closet whenever temps reach 75f..and it's been cold as hell outside.👍 The final trick will be to replace the 6" exhaust fan with an 8" so as to be able to fully exchange the closet air faster ...but that's gonna have to wait til next season. 12/18: Supercropped a Muscie... again... now she's doing the "letter 'S' thang. I'll force the curves tighter over the new few days if she keeps stretching.

The smell is really starting to increase going into week 6 of flower. The buds look like they are in starting to fatten up daily but I have seen a few signs of what looks like could be nutrient burn mainly on the Girl Scout cookies possibly caused by using too much PK 13/14. Some light defoliation again this week along with rotating the pots for better light coverage. Light still set at 90% power. ✌️

11/13/24 Fed today with 15 ml bloom and 15 ml bloom booster as top 11/17/24 the buds seem healthy. just watering as needed. the environment is easy to deal with again since the weather has changed to cold, so now i can run my heater and that drops the humidity to a manageable level without having the dehumidifiers running.

! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - Day 24: attaching once a week APTUS Foliar with Regulator & Nutrispray with the amazing CannaFogger by Petra Grow - Day 28: bud development is super beautiful and praying up, even though the plant still pretty small and compacts compared to others Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) 🌱 --- 🏷️ Big Band by Kannabia Seed Company https://www.kannabia.com/en/feminized-cannabis-seeds/big-band --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique

07.07.2025 Flowering day 9 and rooting day 9. Both, flowers and roots show up now.

Day 106 Plant 2 has been dried and jarred. She ended up bigger than I expected at 148g dry. Super sticky and relatively dense buds. It was about 120g of top shelf and the rest was smaller bud. I ended up smoking around 25g before taking these pics already. Plant 3 probably has about 2 weeks left. She is starting her final bulk and is looking nice and frosty. Stunty was harvested on 25-12-2025 and ended up weighing around 750g wet after trimming fan leaves.

Last week of flushing and next week we harvest 😁

(12/09-12/15, days 42 to 48) Hope everyone enjoys the pictures. I will try to add a video and black back or cover pics by end of week every week. Week 5 Notes & Observations: Topped both plants and starved for 11 days. The idea being that I want the roots to search out new space and expose more root growth to the nutes in the soil to better help in the growth after the training rather than just the recovery. I made a decision on P2 and decided to keep both sides for a total of 8 colas on each plant since but topping day P2 was looking way better and showing nice re-growth. I recognize that growth will be stunted on the damaged side, but I want to see by how much in case I do it again in the future. Neither plant broke on this last training and bot seem in good health. I am however monitoring a possible calcium deficit and treating with CaliMagic. - inspected defoliated fan leaves and discovered Spider Mites - treated with Captain Jack's Deadbug concentrate mixed into 1 cup of purified water - sprayed tops and bottoms of leaves on all plants inside that tent. Will have to retreat again in 3 days, and possibly again after that. ***from label*** LAWNS AND ORNAMENTALS: Use Site Pests Controlled Comments outdoor ornamentals (herbaceous and woody plants) emerald ash borer gall midges leaf feeding beetles leafminers sawfly larvae spider mites1 thrips worms, including loopers, webworms, bagworms, gypsy moth, and tent caterpillars Uniformly spray foliage to point of runoff. Uniform coverage of upper and lower leaf surfaces is essential for effective insect control. Apply when spider mites are first observed prior to webbing and before mite populations have become severe. Reapply after 7 to 10 days (3 to 5 days in greenhouses and structures that can be altered to be closed or open) to contact newly hatched nymphs and repeat until infestation is managed. Uniform coverage of both upper and lower leaf surfaces is critical. VPD and PPFD: This week I will hold the humidity in the tent to about 70-75% and temps will be monitored for 70- 75F daytime and 66-71F overnight. Im adjusting my lights and look to control them at ~400ppfd max. Meaning slight increase over last week but mostly just growth increase. Feed & Monitor: ***All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add-in is reached using a (Total Dissolved Solids) TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate will eventually replace the "Veg Mix" concentrate entirely. The ppm and ratios of each feed will be listed when I feed. Veg mix recipe is on week 2. Bloom Mix recipe is on week 5.*** Day 44 (last feed was day 34) Tested and Calibrated my ph pens. Starting weight from each pot was 18 lbs and 8 oz, both P1 and P2 weighed 11lbs 2oz before feed. Each plant got 1.5 gallon of purified water with 362ppm Veg Mix concentrate (recipe on week 2) and 106ppm Bloom Mix concentrate (recipe on week 5). The ph on this feed was balanced to 6.1ph to combat the original higher runoff ph from the previous runoff feed tests. After feed, both P1 and P2 weighed 19lbs 2oz after feed this time (P1 was 22lbs 3oz and P2 weighed 21lbs 14oz after last feed). I got about 8cups of runoff on both P1 and P2 this time (both plants gave up 5 cups of runoff last feed). Runoff for P1 ph was 6.3 with 906ppm (6.45 with 1170ppm last feed) and P2 was 6.4 with 814ppm 6.45 with 1230ppm last feed). Top soil tested at: P1 6.23,6.21,6.26,6.27 for an avg of 6.24 (6.327 avg after last feed) and P2 tested at 6.4,6.39,6.25,6.46 avg 6.37 (6.402avg after last feed) - next feed will be 6.3ph as Im liking where the ph is now and I dont see any issues from feed or training.

3.12.2021 Day 71 Crystal METH Info:Ice Flushing! Temperature: 21*C - 29*C Humidity: 54% - 72% 4.12.2021 Day 72 Crystal METH Info: In Dark! Temperature: 22*C - 29*C Humidity: 52% - 72% 5.12.2021 Day 73 Crystal METH Info: In Dark! Temperature: 21*C - 29*C Humidity: 56% -78% 6.12.2021 Day 74 Crystal METH Info:In Dark! Temperature: 21*C - 27*C Humidity: 54% - 76% 7.12.2021 Day 75 Crystal METH Info: Drying! Temperature: 22*C - 29*C Humidity: 50% - 68% 8.12.2021 Day 76 Crystal METH Info: Drying! Temperature: 21*C - 28*C Humidity: 51% -72% 9.12.2021 Day 77 Crystal METH Info: Drying! Temperature: 21*C - 26*C Humidity: 56% - 70%

its after 4 weeks of veg the video because i dont have a pic

-In dieser Woche habe ich das Licht auf ca 400 PPFD gestellt. - Zusätzlich habe ich die untersten Blätter entfernt damit die Kraft mehr in die Triebe geht. - Ansonsten musste ich nur einmal gießen, was aber normal am Anfang ist solange noch wenig Wurzeln im Topf sind. - Der Drain war ziemlich erschreckend sodass ich beim nächsten Mal erstmal nur Wasser kriegt.

2018-04-03 Week 14 Day 1 Not much to say, there isn't much drama going on in growroom 2, the only things I do is giving them water and nutes 2 - 3 times/week and making sure that the lamp don't burn the girls. I gave them 4 liters today, and since they live in smartpots I can see when the pot gets wet when watering the girls, but you could hardly notice that. They are getting thirsty 😛 The flowers are developing very good, they look really healthy and their colors are fine. Power Plant XL nr 1 is 67 cm Power Plant XL nr 2 is 66 cm 2018-04-04 Raised the lamp to it’s highest level and turned all girls 1/4 turn, it’s really hard to get in to the ladies in the back, I need to push the girls up against the walls on each side and crawl on the floor to be able to turn them and give them water/nutes. Damn these plants, why do they have to grow and become so BIG?! 😆💪 Added a new video, enjoy my SoG 😄 ------------------------------------------------------------------------------------------------------------------------------------ Strain information Genetics for the famous Power Plant were captured by a group of Dutch growers on a trip to South Africa, back in the 90’s. They managed to breed a strain that was soon a popular choice in coffee shops of the Netherlands, most likely due to the soaring and intense Sativa high. Zambeza Seeds thought that the productiveness of Power Plant should never be forgotten and created an updated version, to bring the legend back to live. Power Plant XL yields up to 600-750g/m² in a flowering period of approximately 55 days! The efficiency and productiveness of Power Plant XL fears no comparison with many recently bred cannabis strains. Indoor heights of 80-110cm make this sativa-dominant variety relatively easy to grow, but outdoor growers need to be aware of the power that is being released under the sun. Outdoor plants can easily reach heights of 150-200cm, and yields of 500-600g per plant. The taste of Power Plant XL can be described as a delightful blend of sweet and sour flavours, with subtle hints of pine tree in the background. Smokers who appreciate a very strong and uplifting Sativa high will be more than satisfied with the effects. One will experience feelings of euphoria that are definitely intense and uplifting, typical for a South African Sativa like this. The up-high can also evolve into being more relaxed, especially when larger quantities are being consumed. Some people suspect Power Plant to be grown in large commercial operations around the world. It doesn’t really matter if these assumptions are the truth or myths, but Zambeza’s breeders are very proud to bring this highly productive legend back to live. The updated version of it, Power Plant XL, is the most efficient Dutch "bud factory" money can buy. ---------------------------------------------------------------------------------------------