Likes
Comments
Share
Looking nice, lively healthy frosty. The smell is starting to fill the room. I try not to nudge them too much and preserve the aroma a max inside those buds. I increased the Terra Bloom from 3ml to 4ml per Litre.
Likes
41
Share
Already showing some flower buds. It's developing well. Did some hard defoliation. smells good
Likes
43
Share
Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
19
Share
Left to right: All Gas x Cali Octane (Promo), Banana Butter Cups, Gelato, OG Triploid. Pictures taken day 48 of flower, just started into week 8. I messed up last week and uploaded pictures that were still from week 6, but I'll just leave it as is. I found one small bud with botrytis, seems to have been the only one, so not too worried there. The far red is really showing its effects now, all of these normally take 63-68 days to finish, as it is I think I can chop around day 58. Combined with the super short veg, I could do 5 runs like this a year. BBC is fading nicely, was growing strong. The others didn't use up the nutrients, even though its been straight water only with microorganisms and some kelp added every two weeks. I didn't do any pH correction and the tap water here comes out at pH of 8 and 0.8 EC, I cut it to 0.4 EC. Impressive! I am not getting sponsored by biotabs, but I am amazed what just the tab itself without any of the product line is achieving. I am sure, you can push the plant more, but I love the keep it simple approach. Next round I am going to add a Blumat self-watering system and just check in on the plants once a week. Edit: Harvested at day 56, the far-red took off a solid week - as expected. Smell was intense, they had 36 hrs of darkness before harvest, will hang until I get back Saturday evening and then go into the winecooler I modified. Currently at 19 C and 50% humidity, bit too dry, but it's only for two and a half days, so I'm not worried. The biotabs didn't fully dissolve in the 9 weeks they were in the pot, next round I will break them up a little. Only the BBC really faded, I hope the taste won't be too much on the nitrogen side 😬 harvest update will follow as soon as they are dry, so probably in another two weeks from now
Likes
2
Share
@zenderman
Follow
29/11.day 36 of flowering,started week 6. photo no.6 is a mother plant.
Likes
12
Share
Estos videos fueron echos el 25 de diciembre de 2021. Creciendo poco a poco, se les hizo poda de bajos y tutorado. feliz navidad les desean las babys! ig: @micro.semilla
Processing
Likes
2
Share
@krst97
Follow
I cut the plant after 48 hours of total darkness. To flush the best, I ran a few dozen liters of water through the jar until the one that came out below was transparent. Although the flowers failed to close, I am satisfied with the result and the smell of the buds inspires a good terpene. To dry well, I moved the grow box to the room with an air conditioner. I'm keeping the temperature around 26-27 degrees and the humidity around 50%.
Likes
5
Share
@Zeaiache
Follow
En su Nuevo suelo y con los microbios ganaron vigorosidad, las hojas están frondosas, y sus tallos engordaron, la verdad siento que prometen mucho 😈
Likes
40
Share
End of week 8! Took the girls off their nutes and starting the flush. Lowered the light intensity for 2 reasons. 1. It’s hot as balls and 90+ with no Silca could be an issue. They actually seem to be much happier already with only being a few degrees lower. 2. I want to see if less intense light/heat could replicate the end of the season sun if they were growing au natural 🤷‍♂️🏻
Likes
4
Share
Week 7 for 9lb Hammer F2, Have finally starter pulling them side ways. Its been raining all week not much to report. Haven't had to water anything.😂 Hoping to see what training her will do.
Likes
41
Share
@Growing88
Follow
Ho aspettato un settimana in più per avere piante circa della solita altezza,le indica si sa che sono più lente in veg,sono pronto per il flip 12/12 😈✌️🏿
Likes
25
Share
@Weedbadk
Follow
Enamorado de esta variedad,está demostrando unos colores muy hermosos,su aroma es muy fuerte y notorio,esta semana vamos a aplicar la técnica rib para ver si tiene un beneficio en la planta . Ahora se viene el engorde unas de mis etapas favoritas.estoy pensando en poner tutores para soportar el peso de las flores
Likes
6
Share
Flipping these biatches today, gummy buns have coped well with my not so dialled in room!! Give them a defol gotta make sure there’s no light leak etc and we’re ready to go✌️🏼
Likes
10
Share
Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. This week I'll decide whether it goes straight into the flower tent or is pruned again. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
17
Share
Hi! Thanks for checking out my Royal Dwarf grow! Please comment on how healthy you think the plant is or any thoughts. In less than 2 weeks I have learned so much from you guys and i want to make a point of thanking you as this medicine allows me to live what I would consider a normal day to day life! :) So... Beginning week 2 and from the first few pictures and videos I think the plant is getting healthier, Getting a ph meter this week also, will probably resolve any issues I think I'm having. Day 7/8 I was going to switch from the Vitalink Plantstart + Canna Rhizotonic schedule to Canna A, B, Rhizotonic and Cannazym. I have not gotten around to doing so yet as I think I've been overwatering the plant. stopped watering and started using the spray bottle to keep the moisture up. will water with the new nutrients once the plant has dried out a bit. Day 9: Transplanted from a 1L to a 19L/5Gallon, the top half of the 1L container was dry and had what looks like well developed roots and the bottom half was wet and the roots were hanging out when transplanting. I definitely should have let it dry out more. Day 10: Rhino pro 200/600 Carbon filter arrived and it's the 1100cfm/overpowered version as I read it was better to get a filter with a better CFM rating than what your fan can move. The fan is an Isomax 900cfm or is it m3/hr ? I added a short video after the pics so you can get a fairly good view of the setup. I got 5m acoustic ducting and connected it up as best I could with the space I had. I Was covered in rock wool, didn't have wire cutters and had to go buy some to finish the job 😅. Talk about a nightmare! I left 1mtr spare ducting for the intake fan in future grows. I think it's worth mentioning that the 6 fans on the back of my grow light are louder than the filter/ducting/fan/ducting (in order). Noise level of light and fan combo is between a really expensive/good quality bedroom fan and a hairdryer as a comparison. As I don't have my intake fan yet Im using passive intake and my fan has a 3 speed controller so I have it on speed 1 and there is negative pressure. Finally i mixed up the canna nutrients and changed ph from 7 to 6, I'm not sure what's ideal for autos but I read that anywhere between 5.8 and 6.3 is good for autos? Let me know! Day 11 (update) As I have now realised how to edit my weeks in the diary I will start doing so! Read that a fluctuating PH is good between 5.5-6.5 so I'm gonna stay at ph 6 and let it do its thing. The plant seems to like this a lot more than ph7 although it is still stressed from transplanting (1ltr-19ltr) it's still growing new leaves but growth appears slower. Finally after a few cold showers I have recovered from being covered in rock wool! (thank god😂) also I started a RQS Quick One as a backup for the dwarf and RQS Fast Eddy as Im eager to see if medical marijuana has a better effect on my depression, anxiety and sleep problems than regular high thc low cbd strains. Check out my profile (JuicyFruit) to see my diaries for these strains! Day 13- my dwarf still seems stressed from the transplant, its growing some new leaves slowly but is still drooping from transplant. gonna be a dwarf-dwarf by the sounds of it! 😆 and i was doing some research on optimal hang heights for my Phlizon "3000w" COB LED, it seems that 40 inches is good to start from. i also read another users opinion that the switch on the fixture labelled VEG&BLOOM is mixed up with the other switch that is labelled STRONGER. The VEG&BLOOM switch is LEDs along with IR. (i read that the IR is probably further stressing my transplanted dwarf) and the STRONGER switch is COBs. i took a minute to think about this but after realizing that the plants can probably handle the COBs (STRONGER) at the right distance i may aswell use them for veg and switch the LEDs and the COBs on 1 or 2 weeks before flowering for full flower power! after reading all that i went straight over and switched the LEDs off and put the COBs on. il post pictures in the morning to show how the plants reacted. fingers crossed people! Please comment on anything you think i could improve on or any advice to help this plant grow better as it is much appreciated! Peace! Day 13 Update: took some photos and it likes the COBs, although they are very hot combined with a sunny day reaching high temps of 29c. turned the fan up and opened another passive intake on the tent. finally im going to get some calmag and a oscillating fan for the leaves and hot spots in tent :)
Likes
64
Share
@DevilsBud
Follow
11/10/21 new week for Captain future Single photos will be updated soon She bit slower then the rest but getting there topping has bin done and everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter. Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.
Processing
Likes
13
Share
@Dunk_Junk
Follow
Week 10 done!!! She is getting frosty!!!! Trichomes are going crazy this week. The only input from me this week was to water/feed her.
Likes
26
Share
@GrowGuy97
Follow
2 of them got cut on day 66 the last one on day 69 but overall I couldn’t be happier with these babies they all put off some amazing buds & didn’t give me much trouble at all! This is by far my favorite auto of this grow & I will be doing another run with them! If you havnt already go get you some seeds from seedsman you won’t be disappointed! Will be back with more pictures, dry weight & smoke report as soon as she is done drying! Thank you to everyone for following & happy growing friends!🙏🏼🙏🏼✌️🏼🌱