Likes
14
Share
When I got into the room one day before I scheduled the harvest, her branch collapsed under the weight of the buds. Not surprising, the buds were massive and dense! This is one of the best problems to appear during a grow, could never be mad at a plant for lack of strength to support the massive buds. I decided to view it as a sign from the plant, that it's done, it had enough, so the harvest happened a day early. Her buds were too tall for my DIY Cooler and since the buds were so dense, it wasn't easy to get to the stem to cut it and since the buds were covered in trichomes, the gloves were super sticky. The genetics were pretty amazing to grow, super happy plant with amazing growth - thank you, @Exotic_Seed for the seeds! 🙏
Likes
16
Share
Day 91 - The buds are frosty and getting more denser every week.
Processing
Likes
27
Share
@BudXs
Follow
Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430
Processing
Likes
9
Share
Growth stun abit in #1 due to snap in the stem but still manage to grow half inch. n push new growth........#2 main growth stun but directed to lower branches n still grow about 2 inch......#3 double it growth with 4.5 inch. didn't need lst was showing good growth in lower branches from early
Likes
7
Share
Beginning of week 9, the usual SST foliar and and 5l via drip, also 5l of rain water into the reservoir yesterday . I’ll probably veg week 10 & 11 maybe , want to fill the scrogg and stretch the tops after flip
Likes
4
Share
@DRO420
Follow
Last week of flowering. I defoliated some more to let in more light to the lower buds so they can fatten up. Trics are all cloudy/milky with 1 or 2 yellowish trics.
Likes
9
Share
This is week 3 going into 4. Not any proplems apart from neededing a ppfd reader. Anyone recommend any good ones.
Likes
33
Share
@LouShott
Follow
Everything is looking good. Slight bit of nutrient burn on most leaves so i have added plain ph'ed water to reservoir to lower the amount of nutrients running at 789ppm after. Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈Buds 👽 Buds 😈
Likes
6
Share
She stretched out a little bit in week five so I upgraded the grow-light to a Mars Hydro TS600. Using 0-10-10 Alaska Morebloom for and Light 5-1-1 fish emulsion.
Likes
15
Share
@Ronin716
Follow
(I’m starting to try timelapsed videos of growth so lmk what you think) So I’ve added a little lst to #1(the one I topped) just to capitalize on it I guess. But they’re all doing really well at the end of week 4. I’m trying to get better with photos and documenting so bare with me but as for #3, I’m really impressed with how fast she’s gotten bushy and with how she’s taken to lst. I’m doing different things to different plants to see what I like and what works for me. #4 is my control and I’ve done nothing but water and feed and honestly, she’s still doing just fine 💪🏻
Likes
9
Share
Likes
14
Share
Av had a good week been busy dunno exactly wot a want tae dae hear feel like a constantly want mere paitience is the key Rome essential built in a day
Likes
11
Share
Likes
31
Share
What can I say this thunder fuck is so smooth to smoke, I just can't stop growing it! I am in uncharted waters here because I've gone full organic no till. This will be my first time using grassroots living soil pots and first time using this brand new soil mix. Also to help with costs I decided to make a 5 gal tea reactor, to grow out the EM1 which will save me about 75% on all microbe products, and also save on feralization when used in conjunction with foliar sprays. Wish me luck!
Likes
9
Share
I'm really proud of this for a second grow! For the amount of space and the light that I'm using, i feel like my buds should stack better but at least I have real goals to meet for the next grow. I'm not looking to get lbs, but I do want great quality flowers that are visually stunning. I would DEFINITELY recommend Native Sun Genetics to anyone, beginner to advanced! This isn't a hi-yielder to start with anyway, but it's still one to look for!