Flushing

New week of flowering for CBD SPLIFF BERRY Doing nicely @spliffseeds deliver again a great strain 👌🏻 did Les LST to this one compare to Afghani Gold but made sure the lower stuff gone also make sure less popcorn can pop up. I am not sure if ever smoke a 50/50 THC/CBD strain but will see 👀 Happy growings Growmies see you next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Due to all excitement about the first grow didn’t take any photo of the germination. Used 2x 0,5 water bottles and a wet paper towel for germination. All 6 of the seeds germinated in about 30h. Room temperature was 22 with 65% humidity. I didn't have enough coco for all 6 seeds so I put 3 seeds of amnesia into one bucket. On the 2nd day I found out that You should not pit Your lights on 95% in the first week 😳 Now it’s running on about 27%. At the moment I have only one marshydro ts1000. But I figured that for the first week it will do the trick. Hopefully the second one will arrive sometime next week. At day 3 my coco finally arrived and I could put the 2 couchsurfers into their own pots. Since they are small (about 3cm) they fell out of the soil...but due to them not having any proper roots I hope they wont stress out much about the transplant (although everybody warns about not transplantong autos) So at the end of the first week I must say it is not rocket science but I made some serious mistakes that wont happen next time. Will definetly add perlite next time and be extra carefull with germination.

too much nitrogen properties the reason for this strong concentrated fertilizers in consequence of which you get these dark green shades. I think that constant ventilation the stems become very strong and therefore, they do not lend themselves to tucking

Coming up

SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY This is my diary entry into the Dynomyco Show Us What You Got Contest! #DynomycoShowUsWhatYouGot! @DynomycoShowUsWhatYouGot! Big Shoutout to @Dynomyco for picking me in their contest. Happy to be involved and as a user of Dynomyco I am curious to see this side by side with my own eyes. I will be honest I am a little skeptical it will show any major differences. but we will see what happens. Some disclaimers, I am still using LABS serum I made as well as MIIM Miicrobial Mass. These are also beneficial to the root mass however they are bacteria based and not fungal or mycorrhizae like Dynomyco. https://growdiaries.com/giveaways/DYNOMYCO_Show_Us_What_You_Got I was going to use my own clones I made from the g13 labs grows I just finished but released I had used a Dynomyco in the medium when I was rooting them for a extra strong start. So to fix this little error I went out and purchased two Cherry Pie clones from a local grey market dispensary. I joked Dynomyco will cover the cost and yet to hear back from them lol. I have inoculated one clones rootball and the transplant medium with Dynomyco, the other clone and its medium got no Dynomyco. The Dynomyco Clone is on the left in photos, it's also the only pot with a mini glass thermometer. I did this exact thing in my Dr Seeds Granddaddy Purple Diary vs 60day wonder. I don't expect it to count as an entry but more of a 2nd side by side on two different strains. GDP vs 60DW. Hopefully I will get some stickers in my package and can label the pots as such. I used my own personal stash of Dynomyco as I have not been shipped the contest materials yet but the clones where good to go an I wanted to get this beast on the way. The plants will be grown outdoors and transplanted at min 2 times max 3 times. Nursery pot to 1Gal, "this weekly entry" 1Gal to 2Gal, "3-4 weeks away" and finally 2Gal to 3Gal maybe. "6-8 weeks away" This week 1 entry is the first transplant from nursery pot to 1Gal, I have sheltered them inside for the first few days as we got heavy rainfalls and I did not what that to be to much of a shock for them, they are in my Spider Farmer tent under 24/0 lighting with the SF1000 @60%, they should be good to make their way outside tomorrow if the weathers good. I have noticed I have a lot of outside light interference on my balcony with all the safety lights in the surrounding areas buildings. I am going to try and LST these plants to keep them low and below my balconies wall to avoid excess light pollution. about 3 feet high.

First day of my first Grow Diary, friend gave me these so I thought I would see what they got, 4 x washing machine and 2 x Jaffa Cake, I will be scrogging, topping and performing some LST to open them up. Transplanted cuttings straight into the 12lt pots, I used the white shark powder around the root area during transplant. Food Making Notes: 1. Canna A, Canna B, Startbooster 2. Measured E.C at 1.2 3. pH'd from 6.5 down to 5.8 4. Added White Shark (just a sprinkle) Feeding was done primarily around the root zone, after a few days I will begin to saturate the whole medium. Update (+3 days): - Washing Machine have really settled in and has had some great growth, I have started doing LST and topping at the 4th node, video and pictures added. - Jaffa Cake not doing so well at the moment, they seem to have transplant shock, I am taking it easy for the moment, spraying them with a Super Thrive foliar spray, within the next feed I am planning to reduce the E.C to 1.0 and add super thrive to the food, along side the start booster and great shark. Update (+6 days) - Washing machine growing really well, got two growing perfectly and two of growing three leaves and many branches. - Jaffa Cake is now recovering from it's transplant shock, made a dome for them to create a high humidity environment while rooting in the pot, dome was sprayed with a mix of water and super thrive, I also made up a different batch of food with 50% of the nutrients, E.C around 1.0 (500pm).

Soo week 2 girls seem to be doing good ! Been faffing around with temps and humidity as struggling to get a stable reading for both especially with the weather getting more hot! But will keep trying to get this spot on l. Will be re potting The zkittles this week I reckon ! Update : With the addition of the RAM 5L humidifier the plants are loving it and the temperature + humidity is very stable and normally reads between 50 and 60 during the day and 40-50 when lights are off following this with the the temperature during day between 27 and 29 when lights are off stays between 20 and 23 I made some adjustments such as going down to 400 watt on my ballast and it works well when it’s like an oven outside so quite happy with these readings as before my temp was over 30 and humidity would not get past 35! Week 3 slowly commences where the nutes will be introduced I have opted for plant magic ! Price was reasonable and after reading reviews it does bring results , I didn’t fancy spending too much on nutes as I’ve spent a load on everything else haha but hey we shall see how it goes Happy growing 😜🤩

She's still going! Not long now though, I'm thinking a week or two. She is so frosty and sticky! Incredible.

Fait son chemin tranquillement, les conditions sont bonne hydrométrie 60-70% température varie entre 19°et 27degrés.

🍪🥜🍬⛽️

🔥🧀

This strain was wicked fun to grow. Yield is amazing. One plant filled a 30 gallon tote once dried. WPM and leaf septoria was horrible this year but this strain seemed to do just fine. Very resilient. Grew short and stout like an indica. Covered in trich's and smells amazing.

Start of week 7. Week 6 went well, however she still required and extra 2 liters of food on day 6 of week 6. This girl is insanely sticky, she's getting super dense and frosty, with a sweet earthy smell.

Really Frosty, could needed one more week

The Plants recovered greatly from being defoliated and grew new leafs around the budsites. At the end of this week i started giving some pk13/14 to support the bud stacking and bulking. In two weeks im gonna leave it out again. I hope its not gonna be too much phosphorus for my Babys 😬❤️

Start of week 4 of flower! Off to a troubling start, as the light switched on over 1 hour ealiere than scheduled. I took a spare timer, and set it up to continue it's 12/12 schedule, but now moved one hour back. I cross my fingers they forgive me for this error.🙏 👽👉31/10 The day after watering and the day my timer messed up my 12/12 schedule. But hope it brings no problems. I defoliated lightly and only removed most under the SCROG line. Even a couple of underdevoloped branches that stretched below SCROG-net got cut. 👽👉 1/11 Been having a battle with humidity after watering, but upped my air circulation to help. 👽👉 2/11 Waterday* Upped my nutes on BioHeaven, BioGrow and BioBloom. 👽👉 3/11 They seem to be responding good to the upped nutrients. 👽👉 4/11 Humidity under control. 👽👉 5/11 The VPD on point, has really speed up the trichome production. 👽👉 6/11 Waterday* Stayed on the same schedule, as last watering. They seem very satisfied and no signs of mistreatment.