Likes
Comments
Share
✂️ Die Strawberry Banana von Fastbuds hat ihr Ziel erreicht. Nach 13 Wochen ist die Zeit der Blüte vorbei und der Übergang zur Ernte vollzogen. Die Pflanze wurde erfolgreich umgelegt und befindet sich nun im Trocknungsprozess. 📋Mit einer finalen Höhe von 58 cm ist die Pflanze zwar kompakt geblieben, hat aber eine solide Blütenstruktur entwickelt. Auf den Bildern zeigen sich gesund ausgebildete Buds mit einer insgesamt grünen Blattfärbung, die in den letzten Tagen der Reife natürlich leicht verblasst ist. Die Struktur ist offen und luftig, was bei der Trocknung definitiv von Vorteil ist, da so die Luft gut zirkulieren kann und Schimmel kaum eine Chance hat. 📸 Der Blick auf die Details bestätigt die Entscheidung zur Ernte: Die Blütenstände sind dicht und zeigen eine ordentliche Harzbesatzung. Die Pflanze wurde im Ganzen aufgehängt, um eine gleichmäßige Trocknung zu gewährleisten. Jetzt heißt es Geduld haben, bis die Stängel beim Biegen brechen statt sich nur zu biegen. Dann geht es ab in die Gläser zum Curing, um das Terpenprofil der Strawberry Banana richtig zur Geltung zu bringen. Ein solider Abschluss für diesen Run.
Likes
42
Share
@Coopmc
Follow
Full of seeds from SubLIMEinaL Pollen!all kinds of seeds now cross fingers there good! Buy looks of the seeds about a week or two left Looking like the seeds are going to be small Sativa seeds
Likes
8
Share
Flowering week 4 ---> Indoor plant: Nothing special this week. She stop to growing and making buds. Flowers become more bigger and dense with a strong smell.💪 The soil dry out very quickliy. I waterd it with 4lt of water (pH 6.5) and half tab of EASY BLOOM BOOSTER TABLET from Royal Queen Seeds one time the first day of the week and another time the last day of the week with other 4lt of water and half tab of EASY BLOOM BOOSTER TABLET. I removed the yellowing bottom leaves. Temperature grow box---> 22-26 °C Umidity grow box ---> 45 - 55 % Outdoor plants: They stop to growing and they start to make many beautiful big flowers. I water them with 6.5 pH water and Atami 1 Component every time they dry out. This week i waterd them with 2 lt of 6.5 pH water and 5ml/L Atami 1 Component for each plant.
Likes
11
Share
@SteffenX
Follow
18.10.2024 very humid and little sun on the west side 21.10.2024 day 187 Beautiful sunny day, then powdery mildew discovered and started the 3rd harvest.
Likes
9
Share
@Dubstepah
Follow
Im happy to start another growing experience with my new equipments 😍
Likes
34
Share
@Canna96
Follow
Hey now, hope everyone is having a great week. The Glueberry OG is still hanging in there, she is only 10 inches by week 5, but she appears to be fairly healthy. I did some LST this week, mainly readjusting the uppermost mains to try and allow the lowers to catch up. I did go out of the state for a few days and when I got back the PH in my reservoir was at 7.1 which is way too high. I miscalculated how much it would rise while I was gone, I should have had someone swing by and check it, but i will next time. Fortunately it doesn't appear to have affected this Glueberry OG as all her leaves are still lime green. It did affect the Strawberry Banana from Fastbuds slightly, as the lower leaves have a couple rust spots but nothing major. Fortunately the two youngest plants were not even hooked up to the reservoir yet. I am still very pleased with this Medic Grow light, as I still have her on the V1 Spectrum at 60% now and she is keeping the plants short and bushy. I believe this Glueberry OG is about to start stretching maybe this week or next at the latest. I will do my best to limit her height as much as possible, as this light is way too powerful to have her colas getting any closer than 10-12 inches at most. Not much left to do with this Glueberry OG except continue some minor LST to keep her level, and determine when to switch to flower nutrients. I see many growers switch to flower nutrients as soon as they see pre-flowers, pistils, etc, but I disagree with this method. I continue feeding veg nutrients until I see my lady stop growing vertically. The reason is if you cut off the nitrogen too early she will stop stretching and just produce flowers, so the length of her colas will be GREATLY reduced. If I am running out of vertical space during the stretch, I will make the switch a little early. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
4
Share
@Chubbs
Follow
What up Fam. These girls are growing amazing. Now that I can controll the temps a little better they've taken off with growth. Starting the flower period which we all no know what that means. The countdown is on. Over all Happy Growing.
Likes
6
Share
This week i flushing a plant 7-10days and use ice burn then close a light before hardvest 2days
Likes
55
Share
@Xpie77
Follow
💚Please Like This Diary and Leave a Comment!💚 pH @ 6.8 Plants grow nicely and are strong! No Nutritions until flowering start. Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💸💸💸Wanna Try Red Wine from Seeds Genetics?💸💸💸 https://seedsgenetics.nl/product/red-wine-gefeminiseerd/
Processing
Likes
42
Share
Blasted a small amount just to see ...💎 Started to chop at 8 weeks I'm on plant 9 of 19.... 🍊🍊🍊🍊🍊🍊🍊🍊🍊 😈
Likes
49
Share
@DevilsBud
Follow
New week for the 2 pineapple dream edition Both pineapple dream edition are different from each other but nothing extreme they both smell like pineapple tree the buds are rock solid and glazed with trichomes just amazing stuff it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
12
Share
*Early Flower 09/10* (2) Fastbuds - Mimosa Cake Auto Aggressive LST was applied for even light coverage. Smaller-Lagging budsites and bigger fan leaves under net have been removed. Slight increase in nutrient feeds, thus far 0 signals of deficiencies. *Mid week update - 09/13* Both plants have grown approximately 6 inches in height Early flowering continuing to progress accordingly Half a gallon increase in water feed (Nutes included) *End of week recap 09/16* Mimosa Cake (Auto) - Both in week flowering accordingly Small increase on nute feeds - Moderate increase in filtered plain water feed (1.5 gallons ) *SEE END OF WEEK RECAP VIDEO*
Likes
19
Share
@Changman
Follow
The ladies are packing on beautifully and we are now giving them extra strength light during 12:00 till 14:00 slot 100% and lowering the light back down to 75% from 14:00 till 17:00 and then 50% light from 17:00 till 23:00. Lets see what happens
Likes
34
Share
@LordSpl
Follow
Crescono senza problemi anche se le stresso molto
Likes
11
Share
This strain is straight 🔥 the bud is super dense, frosty and the smell is super milky sweet. The bud just look super indica that turn out to be broccoli.
Likes
4
Share
@Lazuli
Follow
She finally stopped the stretch and now this tree is going in full flower under the spiderfarmer sf-2000
Likes
22
Share
Likes
12
Share
This week we gave some more guanokalong nutrients, more specific for flowering the buds are starting to form and getting bigger slowly day by day! We see lot pf bud sites everywhere! Also applied a small amount of foliar bio insecticide just in case before the plant is too advanced in flowering 29 august: nothing 30 august: water 31 august: nothing 1 September: nothing 2 September: water and guanokalong nutrients ( powder, black pellets, palm tree ashes) 3 September: nothing 4 September: nothing