Esquejes

This thing is no joke nearly 4 feet wide has been taking off like crazy sorry I missed some time there' on this one my old phone broke and can't receive the old pics I had saved for previous weeks but hey better late than never grow is going amazing this thing is hopefully gonna be a good yeilder

Starting to pack on some weight now Room is very pungent Few more branches to tie up then start flush next week This is week 7 flower haven’t had time to do the last fortnight 👎🏻

🌱 Moin Community, kurzes Update zu meinen @ganjafarmer.seed Ladies Tag 45–52 Ein paar Blätter zeigen leichte Verfärbungen und Stressanzeichen, weil ich die Lampe nicht rechtzeitig höher gedreht habe. Autoflowers reagieren darauf extrem sensibel. Trotzdem absolut normal in der Endphase: In dem Living Soil von @white_ash_botanic bereitgestellt von @growandstyle schieben die Pflanzen jetzt ihre gesamte Energie in die Buds. Dadurch wirken manche Blätter müder oder zeigen kleine Mängel – völlig typisch und kein Grund zur Sorge. 💛 Wichtig: Die Buds entwickeln sich richtig stark – dicht, aromatisch, volle Harzbildung. Natürlich stehen sie weiterhin unter meiner @hortispectra Plus X2. Canna Community Germany We Grow Together.

Soil amendment in regular potting soil some uprising foundation the some dr what Eva 4-6-2 worm casting and small brick of coconut coir and mixed all together lol 😂

11/março - 283ppfd / 18,3dli / 27ºC / 78% RH Agua base: - 5L - temp 27 - ph 6.9 - ppm 81 Nutrientes: - 15ml grow a/b (3ml/l) - 10ml Candy (2ml/l) - 10ml B52 (2ml/l) - ppm 1030 - ph 6.1 1,5L por vaso Runoff: #1 ph 5.0 e 1002ppm #2 ph 5.0 e 1035ppm 16/março - 283ppfd / 18,3dli / 27ºC / 78% RH Agua base: -5L - ph 6.2 Nutrientes: sem 2,5L por vaso Runoff: #1 ph 5.2 e 715ppm #2 ph 5.3 e 738ppm 17/março - fotos + ajuste do ppfd para 500ppfd / 47,8 dli 18/março - início LST #1 e poda top #2 - 737ppfd / 47,8 dli 20/março - 737ppfd / 47,8 dli Agua base: - 2x5L - temp 24 - ph 8.1 - ppm 86 Nutrientes: - 20ml grow a/b (4ml/l) - 10ml Candy (2ml/l) - 10ml B52 (2ml/l) - ppm 1362 - ph 6.3 5L por vaso Runoff: #1 ph 5.0 e 1350ppm #2 ph 5.1 e 1260ppm

So ab dieser Woche habe ich mit Plagron Power Buds angefangen und ich glaube das bringt wirklich was.

these came down at 10 weeks and 4 days 509 wet after a wet trim expecting close to 300 finally let's see 🚀 all in all pretty stoked to try that chem ! trying on paper bags then it's jars, check back in later 😱 😱 😱 😱

Been a smooth week lots of nice growth. Topped one plant to let the others catch up a a bit. I'm top feeding and watering once a week as of right now.

Monday 8th March - DAY 17 Leaves are curling slightly and I still have some yellow tips please can someone advise if this plant is healthy? Or what I can do better? Tuesday 9th March - DAY 18 She’s looking more healthy today which I’m pleased about I’m just letting her soil dry a little before I up the nutrients. Happy Tuesday! 🍁 Wed 10th March - DAY 19 Soil was looking a little dry this morning so gave her some more water and nutrients (lowered the dose from last time as advised by a few people.) Thur 11th March - DAY 20 She’s looking ok I think maybe a little on the short side but hopefully she’ll catch up over the next few weeks!! Fri 12th March - DAY 21 She’s rather small I think for day 21 I’m putting it down to trauma from the light drop? I’m not too sure but i could just be impatient!!

Everything goes well. Last vegetation week for these babys. Put SCROG net yesterday. The main-lining plant slows the whole process.

Week 8 since switch to 12/12h. The weather stays good, finally. Pistils start to turn brown. Thricoms are 50% clear, 50% cloudy. Going low on nutrients to avoid over fertilization (600-650 ppm) 2 or 3 weeks until harvest, I guess... Suggestions are welcome. 👍

Looking great. Sour Crinkle is alot further along. Sour Livers doing really nice Auto Blues is getting large very leafy this one might take a while

Decided ima leave her in vegataive stage till she recovers some more from the lst/hst been using cannacure to help with the mystery pests and deformed leaves have been seeing her start to regenerate and new growth is visible thinking week 7 or 8 till I switch her to 12/12 light schedule to flower bit streaching side branches and smaller side branches off the side branches are forming I’m noting more developement by the day

Start flowering

Another solid week of this lady just vegging along. MegaCrop is fueling her growth and she's really guzzling down the water, nearly 16 oz every 18 hrs. If there was a mini hydro category in this grow off I'd decimate all 🤣... Stay tuned I'd say we'll be seeing pistils within a few days, then the fun begins!!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.