Likes
Comments
Share
Plucked a few leaves that were looking at me funny ;) Not much to do! Smells of sweet berries, after a fresh rainfall.. Smells amazing! Watered with 2.5 gallons of the above listed nutrients, every 5-6 days. (when the soil becomes 95% dry) 10% of the solution watered runs out the bottom of the pot, and is removed with a wet-vacuum.
Likes
Comments
Share
@Hanakage
Follow
I used a green gelato seed (Mother) in order to take clones I germinated the seed with a paper towel. The germination time served to wash the coconut with 1000pppm of calimagic, then I added it with 30% perlite and wetted the soil with GH Flovanova GROW+Calimagic+DiamondNectar at 400ppm. These processes lasted 2 days, when the seed was ready I placed it in the soil, and from then on I watered it once a day with a pH always between 5.8 and 6.0. And the following weeks I always use these rules along with the plant's responses: After it opens up and shows the cotyledons, water twice a day. After showing 2 knots 3 times a day and increased to 600ppm of the same solution. After 4-5 knots, water 5 times a day and gradually increase to 900ppm-1000ppm. I put some clones of the mother to root, underneath the rock wool tubes I placed 1/2 finger of water with FloraNovagrow solution up to 400ppm. they rooted as shown in the photo after 1 week and 3 days. I put it in the final 14-liter vase with the soil already washed and the preparation processes done. The mother was transferred to the 60x60 greenhouse, which will flower before the clones.
Likes
37
Share
Will update more. Easy grow super easy to maintain once I figured out my environment. They like to chunk up nicely. Definitely top and train outwards, it makes a huge difference in the plants. 7/19/24 a month after cure. i didnt do anything special or baby the curing process. these are thick and chunky feeling. breaking up a nug and i noticed the texture was different and the buds were so sticky that they kept sticking to my finger. they werent that sticky 2 weeks
Likes
120
Share
So the babies just broke the surface. I am still setting up the grow room. I am going to be setting it up with 12 autopots, 6 of them with the airdomes. I plan on adding more lights as well. I will continue to update frequently. Fingers crossed and here we go! 😃😃😃
Processing
Likes
3
Share
Into week 7 and all is good. All are in flower and swelling out very nicely. Ethos OG Kush is frosty and smells like a citrus grove. Barney's Purple is an absolute beast. Her stretch was impressive for an autoflower and she is almost 48in high. Her flowers are swelling nice and she has become much more fragrant in the last week. Fastbuds Zkittlez is frosty and swelling nice. She is also very fragrant, smelling like sweet candy. Seedsman Pink Kush CBD is doing well, beautiful dark purple flowers and leaves. Lights are still 18/6. No nutes. Monitoring trichomes daily looking for changes in color and clarity in preparation for harvest.
Likes
34
Share
Hello fellow grower Week 2, seedlings developments are performing very well under the Mars Hydro FC6500. Raising the light just a bit, using the same distance that I was using with the Mars Hydro SP3000. _________________________________________________ Transplanting into 1.8l pots, they will last 4-5 weeks, perfect intermediary size just to make watering easier and to keep the control on it. Cellmax BIO Soil needs around 5 days to become active and alive, seedlings can show some little deficiencies like Cal. and/or K. _________________________________________________ One of the LEMON TREE is showing some lil deficiency, but otherwise all the others are growing very well. Got my 16 plants plan, but I have added more seeds to pop out. I got plenty enough light to grow some few more on the side. _________________________________________________ 31/08 Water + BIO RootBooster 4ml/1l pH 6.5 03/09 Transplant Water + BIO RootBooster 4ml/1l pH 6.5
Likes
19
Share
@Papabro2k
Follow
Same as my last run just amazing no problems very hard dense buds frosty to hell I am very happy with this sugar cane and she will be growing with me forever thanks
Likes
20
Share
Best flower 🔝 Strong flower. I love qualitty of HSO. everyone recommend This strain. 💚 Thank for watch. ✌️🏼🔝🔝🔝
Likes
253
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep bumping, girls are so pretty 💜💜❄️❄️😊😊 Smell very, very strong. 💪 Look happy since the defoliation ✂️✂️ 💧 Give water each 2/3 day 2 l Water + Bloom + Green Sensation + Sugar Royal (3.5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% - 22 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering
Likes
75
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We were expecting around 600-700grams but got just over 540.. not unhappy at all lol..the berry terps are very strong with this batch, we've grown this stain several times but this is our first grow under the FC-E6500, buds are hard and resinous. This was a great harvest and should get us all through the next few months..Thanks as always for dropping by and happy harvests everyone!!! 💡🌱 ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable (and adjustable) light bars and driver 🔌 Diodes: BridgeLux chips (3978 count) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
26
Share
@GrowLover
Follow
And the flowering begins! Changed the timer today to 12/12. The plant stems don't seem perfect to me but the clones didn't come as good as they should have been. They were the only ones i had though. The temperature is too high but i can't lower it anymore it's too hot were i live. Can't wait for the colder days! :/ Usually i opt for Scrog but this time i'm going with LST instead because since the grow space is small, its easier for me in case i want to flush or move the plants around. Gonna start the bloom boosters next week. Yay!
Likes
7
Share
@UrbanBoer
Follow
I really wonder how tall these ladies would be if I did not enforce any sort of training, would they even grow tall with only a slight breeze, trust when I say slight, it’s enough to extract air out the greenhouse, I’ve tested this out with smoke to better see the airflow in the greenhouse and itself ventilates. But it is not sufficient to cause any stress to help bulk up stems and brunches, we going to need that strength when flowering takes place, big buds get heavy. I think the more you grow the more you say this is your best cycle, I think it due to the lessons learnt while improving your knowledge. At this moment I can safely say I don’t not have a favourite plant in this cycle because of how unique each plant is adapting to greenhouse conditions, unlike outdoor where the plant is exposed to the elements which I say is a huge advantage because it get all the right minerals and nutrients from sun and rain. Luckily I have a tank full of rain water, to be fair enough to not keep these ladies hydrated.
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
2
Share
@Ninjabuds
Follow
Skunk apple runtz I'm probably only going to keep 1 of these guys seeing the 2nd just has really bad growth so far. I'm sad about this I made this cross out my last grow and was hoping for the better end of things. The other plants is decent but we will see I hope it has the growth pattern of the lit farms Rick bobby and the bud structure of the obama runtz I grew It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
8
Share
Hey guys that’s my first diary. So don’t be so hard with me 😅
Likes
4
Share
Last week's vidoe. For some reason, it's taking like minutes to upload thirty second videos. I will try my best to show the updated videos on a lot of these plants.Now i'm impressed with a lot of my autos growing in this naturally derived nutrient.Solution
Likes
10
Share
@Satax
Follow
Everything is still going well overall. I’ve always had an issue with a Cal/Mag deficiency that I had to monitor for some of the plants. Otherwise, they’re swelling nicely — the Green Poison is starting to look really good and is showing signs of maturity, earlier than the others. I’m starting the flush on all the plants since I’ve fed them well during the grow, and I think they still have enough nutrients left in their systems. The smell is very strong, and the buds are dense and resinous — it’s looking promising.. I’m going to start applying my stress technique on the plants by inserting screws into the stems and using a small scalpel to remove some bark along the trunks, in order to push the resin production even further.
Likes
44
Share
Aufgrund der Höhe, habe ich zu Beginn der Woche an der einen Pflanze HST angewendet und den headbud an einer bestimmten Höhe "umgeknickt". Das hat hervorragend gut funktioniert. Allerdings habe ich den abgeknickten Haupttrieb mit einem seil fixiert. Als ich heute nachmittag in das Zelt sah, lag der Trieb neben Topf und war eins a sauber abgetrennt. Das Seil war nicht unter Spannung gezogen, lediglich als Haltepunkt wenn der Trieb sich wieder aufstellt. Nunja er ist jetzt ab. Ausserdem ist eine weitere Pflanze Männlich. So bleiben 4 von 7 die definitiv weiblich sind. Zum Wochenende gibt es ein paar neue Fotos von den verbleibenden Damen. Bis dahin, grow on.
Likes
2
Share
@TTerpz
Follow
4/22/25: last flush 2 tsp of sledgehammer with 1 gallon of water used 2 gallons between all three plants…more cool colors coming in with the fade 4/24/25: fed with recommended dosage for week 11 on my schedule card (day 31 of flower) 4/27/25: watered with plain ph water at 6.8