Processing
Likes
17
Share
Likes
14
Share
6e semaine de floraison la variété supporte très bien les 98% d'humidité et 10 degrés la nuit sans moisissure. Les tete sont vraiment vraiment vraiment collante avec une odeur typique sativa/haze c'est principalement tropical et florale ensuite des note citrique/haze pour finir sur un fond crémeux de hash
Likes
4
Share
I've been defoliating slowly trying to keep them small due to a house inspection coming up. Once that's out the way I'll put them in bigger pots then switch to flower. They all outgrew the mutated start and are looking good.
Likes
17
Share
Vamos familia, estamos en la octava semana de floración con estas Purple Og Kush de DutchFem. Las vemos con un buen color, bien sanas y van engordando y progresando correctamente. A subido un poco la altura pero no afecto tanto. Ya no se abona más , ya les aplique el lavado de raíces y solo agua lo que les quede ya de vida, que se me echa el tiempo encima. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/55% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.
Likes
31
Share
Hello Guys, I’m TheStrainAlchemist. This is my first indoor growing after years of guerrilla and outdoor. I’m trying those two beautiful strains from Royal queen Seeds Wedding Gelato and Silent Seeds Critical Mango. Both photoperiod plant, the Critical mango came out with a genetic mutation Whorled phyllotaxy which is an interesting variant where several leaves arise from the same point on the stem, I am so amaze f by this mutation and the plant exploded of stems just in week 3 after a forced topping on the first node, the plant was producing a huge amount of leave at the same point stressing the new grow and curling over the grow point, after the topping she exploded and now she looks gorgeous.
Likes
52
Share
You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.
Likes
16
Share
@Dunk_Junk
Follow
Wow she's took to the skies this week! Grown another 27cm vertically! 💪 Absolutely marching through flowering! Very fast! Buds are developing well.
Processing
Likes
141
Share
@Eyeduno
Follow
I don’t get how growdiaries work out the nutrient thing but like I use 40litres water and 60ml of a n b and 60 ml of boost and 25ml of cannazime for the next week or so then Ime go gonna flush
Likes
26
Share
Week 2 7/26- All the girl's are doing great. I had to use some horticulture wire to prop up a couple of the girls that got a little 'top heavy'. Giving 12oz water ph'd to 6.3-6.5 as needed 2 hours after 'lights on' around each plant, and every other day in the saucers (1/4g/ea) to allow the medium to wick it up and stay moist. Temp's running 72-81deg with an average RH of 55-60%. I'd like to have the RH a bit higher but the girl's seem to be doing fine at the present. 😎Ordered another HLG 650R with the supplemental UV Bar to replace the two SunSystems 315 CMH's....should be a game changer! 💪 Also have an AC Infinity 6" exhaust system w/controller on the way to replace the Hurricane 400cfm fan I'm currently running along with another TerraBloom 6'x24" carbon filter as my current filter is losing efficiency. 7/27- Watered today ph'd to 6.4 with 2 tbsp/gallon unsulfured molasses added. I split 2 1/2g between the eight girls by pouring 12oz around each plant and then dividing the rest in their saucers to be wicked up. Temp's, RH and CO2 all on point! 7/28- Light watering today with straight non-chlorinated water ph'd to 6.5. Growth is looking great across the board. Even the late starters, Seedsman Zkittles #1 & #2, are coming along nicely! All the ladies are averaging in height between 2 1/2' - 3 1/2" and should be getting ready to explode as their root systems become more established and are able to start taking in more nutrients. Fans are running 24/7 to strengthen the stalks....they're gonna need it to support the buds these ladies will be sporting in a couple months! 7-29- Watered all through the bottom today with straight .5g non-chlorinated water ph'd to 6.3. Temp's, RH, CO2 and VPD all on point. Unhooked carbon filter from hose as it's losing efficiency restricting exhaust air flow. Girl's all growing STRONG especially the #1 Seedsman Gelato OG in Fox Farm/Nature's Living Soil mix and the FastBuds Purple Lemonade #2 also in the Fox Farms/Nature's Living Soil mix with the Seedsman Gelato OG #2 in SOHUM soil is getting close. I appears the two girl's in SOHUM soil are not quite as tall as the others but are leafing out well and are stocky with close node spacing.....hmmm? 7/30- Lift checked all the pots and gave 2 1/2g straight non-chlorinated water ph'd to 6.4 with 2 tbsp of unsulfured molasses added. I split the 2 1/2g evenly between all eight giving 20oz through the top and the remainder in the pans to be wicked up. I turned up the HLG 650R to 400w at the wall and kept the height the same. My AC Infinity Cloudline T6 exhaust and new Terrabloom 6x24" carbon filter came today, as did the UV bar from HLG for the HLG 650R that'll be here on the 3rd.....CAN'T WAIT!!! All the girl's are really doing well and starting to begin 'gettin it on'! All are healthy and running between 3-4" tall. Side note: While installing the new exhaust fan setup on of my pooches sneaked in the room and munched off a half of a shade leaf on the #1 Purple Lemonade....she's definitely got good taste!😆 In the process of installing the AC Infinity fan I relocated it and the filter to the left side of the tent and re-routed the cold air intake hoses so that both enter the tent at the bottom and are positioned at either side of the tent. I setup the AC Infinity which is a breeze, set all my high/low limits and alarms and let here run! Temperatures now are running 72-81 deg. and RH is remaining stable @ 55%, CO2@800ppm. All in all a good day!😎👍 7/31- Water looks good on all the girls. I'll just top water lightly today with straight de-chlorinated water ph'd to 6.5. The AC Infinity is really a 'game changer' as temp's are now staying in a stable range without having to adjust the settings on my Ideal Air 14k BTU AC unit...niceee! All my ladies are finishing up their second week like champs and I'm looking forward to the next few weeks as when their root systems reach the 'super-soil' they are going to hopefully have some explosive growth. I'll also be evaluating all of them in the coming week to determine candidates for topping and LST to begin. 8/1- The second HLG 650R came today! I tidied up the tent before installing the 650R: moved EXHALE CO2 bags-one on each side, vacuumed, took care of any loose hanger cords and re-positioned the three thermometers/hygrometers. I installed the second HLG 650R w/UV bar in the tent and set both lights to 400w @ the wall and have both boards centered, level and hung @ 36" from the soil. These lights are AWESOME! I checked temp's on the boards & drivers after they were running for 4 hours: 98deg on the drivers and 94deg on the board...pretty freakin sweeet! Gave the girl's a day off from water as they all looked GTG and are all getting ready to really turn on! I plan on hitting them early tomorrow morning with a good watering. Temp's-RH-VPD all on point for this week. I've been continuing to run the humidifier set @ 60% RH and I'm going so far as to ph the water going into it to see if it makes a difference as my well water runs 7.8ph @225ppm dissolved solids and I hypothesized that as the plants were absorbing the moisture from the air it might be beneficial to have that moisture at the correct ph.....we'll see I guess!
Likes
37
Share
@MrJones
Follow
Cream Mandarine XL-Auto #2 / FOOP Nutrients ======WEEKLY GOALS ======= 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 🔅 Vegetation & Flower Kingbrite 240W QB288 v3 LM301H 4000k+ 660nm Red x2 - Maintianing 575 PPFD ========Plant Update=========== 🌱 Plant - Week 4 is underway changed the light schedule over to 18/6 and these ladies continue to just get huge, extremely fast-growing with FOOP! =========================== ▶️Monday 03.22.21 / Feeding w/ 30 ounces of FOOP Bloom, PH @ 6.2 ▶️Tuesday 03.23.21 / Feeding w/ 30 ounces of FOOP Bloom, PH @ 6.2 ▶️Wednesday 03.24.21 / Cleaned up plants today and increased the nutrients, Feeding w/ 30 ounces of FOOP Bloom, PH @ 6.2 ▶️Thursday 03.25.21 / Using FOOP is too easy, and doing a great job these girls are just blowing up! ▶️Friday 03.26.21 / Feeding w/ 30 ounces of FOOP Bloom, PH @ 6.2 ▶️Saturday 03.27.21 / Feeding w/ 30 ounces of FOOP Bloom, PH @ 6.2 ▶️Sunday 03.28.21 / Feeding w/ 30 ounces of FOOP Bloom, PH @ 6.2
Likes
36
Share
Likes
3
Share
Likes
10
Share
It's starting to get cold so i turn the other 120w led, 250w in total and hanged about 1.6 m away keep watching how they respond. As far for watering i only spray the soil when ever it gets dry with tap water. Update; They love the light and start to pray just a bit. At this point i give them 100 ml water every few hours. my humidity about 40% with the humidity dome on. One of them is stunned i keep her for now
Likes
28
Share
@m0use
Follow
SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY So I was grossly overfeeding these little ones and just did not have the time to correct it. I went back and looked at my runoff and it was quite high. maxing out my TDS meter. I flushed em all with lots of liquid and now they all apear to be finishing up majority of the pistils where browning and whatnot. Will let me got for another week or so I think and no more feed just water. There is still some stuff remaining in the soil I got it down to 0.8ec from 4.0+ This grow has suffered some loss from it all but that's ok it was just for shits and giggles and the buds it producing are still nice looking. I also took the saved pollen out of the fridge from my Dinamed CBD Kush Auto Breeding Project - DCKABP lol, and I pollinated one branch on this plant. I marked it with a little red string to see if it would work or not. This was done last week when I missed its weekly entry. and to my surprise I now have a few swollen calyx on my GDP plant. I have no idea how fertile the pollen was as I mixed a lot of it with dried cornstarch and it seemed to do the trick for saving it. Now that I know this I will try this method again in the future and try and freeze the pollen for longer storage times. SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY Big shout out to @SpiderFarmer for supplying the 2x2x5 Grow tent and The SF1000 100w LED light. I will be uploading all relevant photos of the products in the next week when they arrive, maybe do a little unboxing video. Who knows. A 2nd big shout out to Dr.Seeds for supplying the 3x5pac of seeds I will only be featuring two of the three strains in two separate diaries. You the users will get to decide what ones I grow. I have setup a Grow Question on each diary to vote for your strain of choice for that diary. https://growdiaries.com/grow-questions/47600-drseeds-1-vote-what-i-grow "Diary #1" https://growdiaries.com/grow-questions/47600-drseeds-1-vote-what-i-grow "Diary #2" Cast your vote for each diary. Thought I would add in the relevant links if you wanted to read up on any of the products that will be officially featured in this grow. https://www.spider-farmer.com/ https://growdiaries.com/grow-lights/spider-farmer (+) https://www.spider-farmer.com/products/sf-1000-led-grow-light/ https://growdiaries.com/grow-tents/spider-farmer (+) https://www.spider-farmer.com/products/sf-2-x2-indoor-grow-tent-hydroponic-home-plant-reflective-aluminum-oxford-cloth/ https://drseeds.net/ https://growdiaries.com/seedbank/dr-seeds (+) https://drseeds.net/product/granddaddy-purple-autoflowering-cannabis-seeds/ (+) https://growdiaries.com/seedbank/dr-seeds/granddaddy-purple [Photoperiod not Autoflowering] https://drseeds.net/product/60-day-wonder-autoflowering-cannabis-seeds/ (+) https://growdiaries.com/seedbank/dr-seeds/60-day-wonder-autoflowering
Processing
Likes
17
Share
Another watering planned for later today. Lights also changed over to 18/6 to try and control heat levels at night. New tower icolating fan placed in the tent. Lots of new growth, but leaves are slightly curled from heat stress I think. I will keep an eye out. Purchased an air cooler/humidifier placed on the outside of the tent blowing cooler air inside, both vents open with 1x icolating tower fan for the underneath and one fan blowing on top. Temp sitting at 25.5 (roughly) and humidity at 60%...its a little high but needs must. I think she may now be flowering. 🤔 Complete newbie, but white strands are starting to appear 😁 I need to move the light further away, she isn't that far from the top. Because of my restrictions with the size of the tent, I need to cut the top of the tent off and place a tall washing maiden around it and hang the light from that. Let's hope that works. Iv seen it done so I'm confident
Likes
4
Share
Week 11 for Amnesia Zkittlez by fastbuds, She's on her couple of last weeks before she gets the chop, fan leaves slowly losing colour. Only feeding plain water from here onwards😎 Last week was another hot hot week but we are coming down to the low 30's again for the rest of the upcoming week so think the plants will be happier.