The Grow Awards 2026 🏆
Likes
Comments
Share
This one is the fat lady, and the curtain falls as she stops to sing 😂😂😂 Now I started the flower period from the first hairs I saw, to see how long this one will actually takes to get ready 😁🙄 #GrowersChoice #WhiteFireOG aka #WIFI #MyLightIsTheSun #MillsPaysTheBills #MillsLightMix #CNNBS Enjoint & stay medicated 💚
Processing
Likes
18
Share
10/2: My soil mix was too hot and I accidentally killed 11 of the 12 Fastbuds seedlings I had going. So, I started about 20 Candy Cane hybrids in rapid rooters wetted with myco, tricho, and beneficial bacteria. All but one popped up. One of them did a cobra-basket and petered out. The beans all came from tray trash that accumulated while I was smoking three diff strains, so I probably won't know what they are until they are flowering. 10/4: Looks like I'll have enough growing that I have to cull the weakest few. I can feasibly (possibly) squeeze 14 into the lower section of the closet under 720w if they act right and if I do some training, and another 4 in the top under 200w if I keep them at 30" or less in height. 10/6: I think I'll veg everybody in the bottom section until I'm out of space, then move the shorter 4 or maybe 5 into the top section as necessary...and move the tiniest ones outdoors to finish. I just don't have the heart to kill anything that's got a potential yield of a half-ounce or more. Some of the most diminutive plants I've grown produced the stankiest buds.. I've currently got the 200w 3500k+660nm running at about 32" in the middle of the closet, and one of the 3 pairs of 120w 3000k+660nm quantum boards running at about 36" and should be sufficient coverage for the next week or so. Then I'll kick on the pair of boards closest to the doorway and spread them out a bit..and then I'll move the 200w light to the top section along with the best 4 short plants. At that point I'll turn on the center 2 qb's and install a 2 foot Solacure Flower Power UV light in the perpendicular center channel of my frame. 10/7: I installed my new AC Infinity 6" fan in the attic and hooked up a 16" carbon filter today. I used some sound deadening foam on the rafter that I mounted it to and removed 100% of the vibration. I haven't programmed the thermo/hygro stuff yet, but tested it on high and I can't hear a thing anywhere in the structure.👍 I'm also purchasing a dual 120mm fan system from AC Infinity in the door, behind the grille I already installed to serve as fresh air intake. It also has a thermostat feature that will allow me to set it to only come on when the temps are too high, so I'm optimistic that it will allow me to manage the temperatures in this closet with about 1000w running for 18-20 hours a day.🙏 I moved the 200w 3500k+660nm to the top section today and lowered my QB frame to 32" above the plants. I have two pairs of them running now, and received the replacement HLG 240-48A driver today for the third pair. I'll hook it up later..dont need it now.. 10/8: I fed most of them today for the first time...about 16 oz of solution containing grow big, big bloom, kelp me kelp you, boomerang, and armor si. I hooked up the 3rd pair of qb's today....wow that's bright....they're gonna love it!😎 The last of the sprouts has been planted and is growing. That's a total of 19.... 3 of them still in 1 liter pots and getting plain distilled water. I also foliar fed all of them with a little big bloom and kelp me kelp you. 10/9: I got some Axiom to apply onto them tomorrow. It's got a good amount of Harpin a|b proteins which trigger rapid plant growth and other defensive traits that are proven to be canna-friendly, like enhanced resin production and increased resistance to molds, mildews, and fungi. I foliar fed them today with big bloom kelp me kelp you, and the day following the Axiom application I plan to foliar feed them with Biotabs BoomBoom Spray to negate any initial ill-effects caused by the Axiom. I'll probably just mist them with distilled water for a day or two following that regimen to ensure that it's all rinsed off. But, following that break in the foliar feeding routine, I've got some Fulvic/Humic acid to rain gently over them for a couple of days. 10/11: End of week 1, and I'm happy with their progress thus far.😀 They had no trouble with the "Harpin protein attack" I engaged them with yesterday... at all, and even look quite a bit bigger than I expected. They also had their first "night time* last night...4 blissful hours in 74f temps with 48%RH.💤
Likes
12
Share
@mowsgrows
Follow
Endspurt ... Habe soeben einige große Teile entfernt, da diese mit Budrott versehen waren. Im Nachhinein war es wahrscheinlich eine schlechte Idee, den Bananen Zwitter zu behalten ^^ ich habe den Mädels für die letzten Wochen ein 80x80 Zelt gegönnt, um noch etwas rauszuholen. Letzte Woche gabs Wasser mit Alfa Boost, ab jetzt gibt's nur noch PH reguliertes Wasser. In 1 - 1,5 Wochen wird geerntet
Likes
254
Share
👁️CLIP AVAILABLE FROM WEEK 12 ONWARDS 👁️ EDITED WITH FILMORA
Likes
17
Share
Week 6 Day 1 10/28/2023 Water Change Day!! Added: 36 gallons of Water CALMag- .75mil/Gal GH FLoraMicro-4.3mil/Gal GH FlroaGro-4.3mil/Gal GH FLroaBloom-6.5Mil/Gal Liquid KoolBloom 2.5mil/Gal TPS SIGNAL- 4.0mil/Gal ORCA-.5mil/Gal I setup my PH automation system.. I will start it running in 24 hours after the system settles in. Week 6 Day 2 10/29/2023 Going to be interesting.. I left the old monitor in to do a double check behind the new auto PH monitor.. not eh problem is I configured the New one and I am pretty sure that it is more accurate than the previous one I was using but the difference is 5.9 on the new one and 6.19 on the old. So it leaves me to questions if I was always running my PH higher but still just within safe range? or is this one off by that much. Questions, Questions.. But so far it is working I had to make several adjustments to dial in how much of each gets released but right now they are sitting around 5.9 Week 6 Day 3 10/30/2023 Worked on adjusting the auto PH system and I think I will need to change out some of the gear to make it work better.. Right now the suction/ flow rate has to be up to high in order to get the Up or down out of the Containers and the UP kicks on before the Down has a chance to settle.. I would have hoped there is a steady reading for X seconds before it starts the other.. but there isn't it is automatically kicking off the Up even while it is still adjusting from adding Down. Week 6 Day 4 10/31/2023 Today I did nothing but take some pics.. Nice day.. the experiment of the PH auto system is a bust as of right now.. the range is out of what I want.. and it keeps immediately kicking off without giving the water time to balance.. since this is a res system which the water moves.. not the best.. it doesn't have a wait time before release more.. and it keeps releasing even after it starts reading in range.. so it drops it lower than it should.. I could probably dilute the PH up and Down and make it a little more effective.. but not sure what I want to do at this point. Week 6 Day 5 11/01/2023 Today I did nothing but take some pics.. Week 6 Day 6 11/02/2023 Ground Hogs day... Today I did nothing but take some pics.. Week 6 Day 7 11/03/2023 I had to re-super crop two branches at a lower node to bring them back down they had grown up and hit the light again. I had to empty the dehumidifiers out but that was pretty much it.. She seems to be happy happy and growing well..
Likes
165
Share
💩Holy Crap Growmies We Are Back💩 So what do you say we have some fun 👈 We got some EXOTIC SEEDS 👉 👻👻👻MONSTERMASH👻👻👻 😛 Well my friends we are just at the 35 day mark and as you can see shes doing great 👈 👉 So now i felt i need to start training her over to maximize her growth by doing some LST 👈 Just noticed she's starting to preflower 😛 Hedgehogs incoming 👈 Lights being readjusted and chart updated .........👍 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
3
Share
Temps have been on the cooler side lately, with a few days close to 80° .
Likes
13
Share
@SgtDoofy
Follow
Mar 14 Looking good. Fed 3/4 gallon of RAW GROW 6 days ago. Seems to have taken it well. Getting close to needing another drink.
Likes
11
Share
Tag 42 - Ende der 6. Woche. Der Stretch ist beendet und die Pflanze konzentriert sich auf die Buds. Deshalb habe ich in dieser Woche den Dünger etwas erhöht und die Menge an Litern die ich gieße. Ich bin gespannt wie sie sich in der nächsten Woche entwickelt. An Tag 36 wurde die Pflanze gedüngt. Nährstofflösung: 2 ml/l - Voodoo Juice Advanced Nutrients. 4 ml/l - pH Perfect Sensi Bloom Part A 4 ml/l - pH Perfect Sensi Bloom Part B 2 ml/l - Bud Candy Advanced Nutrients. 2 ml/l - Big Bud Advanced Nutrients. Davon hat die Pflanze 1l an Tag 36 erhalten.
Likes
7
Share
Absolutely fantastic strain to grow! Very easy to grow & problem free. Great for cloning. Produces great solid dense sticky buds & yields well. Last grow produced good quality nugs that had great terpenes, high THC content ( couch lock ) & was a very dank smoke 👍😀
Likes
57
Share
good evening to all, my friends God only know what I spent to keep these gems up, but in cure a thing I swallowed another! The too much warmth in tent has arisen a reaction of strong stress in the plant by transforming their peaks from the shape of fox's tail. This happens in some cases when the temperature is very high in a tent and makes it believe the plant that is still full summer making it bloom and vegetate at the same time
Likes
33
Share
@Chucky324
Follow
Hello. This is week 1 of flowering for The Dos Si Dos 33 for Me by Barney's Farm. I put old fertilizer on about 3 weeks ago and the plant have mostly recovered from that. According to the internet I'm getting the Spinosad I ordered today. I also ordered some nematodes a few days ago. I'll have to read if Spinosad can hurt the nematodes. I think I might use the nematodes in my garden first. Most everything else is going good in the grow room. Plant #3 still has some curly leaves but it is getting better. I did the rub test on the plants and plants #4,#2 and #1 had the most smell and the stickiest resin. Plants #3 and #5 had the least smell and resin. Plant #4 is leading for the best smell and stickiest resin and is fairly compact. I'm trying to start some OG Kush seeds from Sensible Seeds Premium Selection for my next diary. I emailed them to find out who made them but I got no response. These seeds were free with my order and I've had them for about a year now. Hope they start. Till then. Chuck.
Likes
9
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱
Likes
3
Share
@RobertV
Follow
I set it in the dark for 48 hrs It frosted up great Smells awsum good actually has a raspberry smell to its cannabis smell I order more this was the largest and best grow yet
Likes
3
Share
I didn’t take any photos of this strain once it went Hermie, but here’s a video of all the jars, I also have a storage tote of untrimmed buds for making rso :)
Likes
21
Share
Im finding these great fun to grow, training is very easy to do considering it the first time ive trained any plants
Likes
23
Share
12/21/20 Seeing exponential growth now. I don’t want to start any type of training until I am able to take some clones off each plant. Very excited for this grow Nutes: Veg A: 0.382g/gal Veg B: 0.257g/gal PPM: 140 Water temp: 64°F pH: 6.0 12/22/20 Nutes: Veg A: 0.382g/gal Veg B: 0.257g/gal PPM: 140 Water temp: 64°F pH: 6.0 12/23/20 I upped nutrients today just slightly as to not cause any damages/burns. Nutes: Veg A: 0.437g/gal Veg B: 0.294g/gal PPM: 145 Water temp: 64°F pH: 6.0 12/24/20 Nutes: Veg A : 0.874g/gal Veg B : 0.588g/gal PPM : 275 Water Temp: 64°F pH : 5.9 12/25/20 Accidentally vacuumed up two leaf tips when vacuuming up excess runoff 🤦‍♂️. 1 leaf off both #3 & #4. It was the single blade fan leaf on both so I took off the matching leaf. 2 leaves off each plant for total 4 leaves. Nutes: Veg A : 1.53g/gal Veg B : 1.03g/gal PPM : 435 Water temp : 64°F pH : 5.9 12/26/20 Nutes: Veg A : 1.53g/gal Veg B : 1.03g/gal PPM : 435 Water temp : 64°F pH : 5.9 12/27/20 Nutes: Veg A : 1.53g/gal Veg B : 1.03g/gal PPM : 435 Water temp : 64°F pH : 5.9
Likes
2
Share
@Clemo
Follow
After 20 days in seedling stage. I stopped watering. Planted into bigger pots using new organic soil.
Likes
67
Share
@Canna96
Follow
Hey now, so this week went very well, I started feeding her ripening nutes today....So I am going with silica, cal mag, maxi bloom, and then dry bloom, ph, then a little hydrogen peroxide. So far they are happy. Plan is to build a little manifold out of her if she cooperates. Thanks for stopping by, I hope your grows are Strong and fast! Be safe and Blaze On!!!