Logramos mucho esta semana y eso nos tiene felices, hemos reforzado la estructura del scrog y realizamos la última defoliación antes de comenzar la floración. Esta es la última semana que usamos nutrición para vegetativo y comenzaremos a usar C21 Nutrients Flores Parte A + Parte B

The Titan is growing as I had hoped. The many side branches are growing larger and in the center is a nice main cola. Beside the LST clips a few weeks ago, no more training is needed it seems. I did some defoilation to optimize the airflow and to give the developing buds in the side branches more light. More pics and updates coming later this week. The Titan is developing a really nice flowery/citrus like smell. I added some Bio Tabs Bio PK 5-8 to the mix to support the many buds she is forming.

7/16/22 Today marks the 1st day of week 14, and the start of the 2nd week of the ripening stage. Stella received a gallon of water mixed with the following nutrients: FloraMicro - 5 ml FloraBloom - 15 ml Floralicious Plus - 1 ml Dry KoolBloom - 0.5 tsp. I seem to be having an issue with pH the last 2 feeding days. I think my gallon jugs have reached the end of their lifetimes, and THAT is what is causing my issue. It has happened to me once before, and getting new jugs cleared up the issue. I’m assuming that will be the solution to the problem. However, we all know what “assume” stands for don’t we? If you don’t, leave a comment and I’ll explain. The initial pH was 5.4. That is the lowest that I have ever had simply after adding nutrients. I added a total of 10 ml’s of pH UP, which in my opinion is way too much! But, I did it in 3 separate increments. Not that that makes it better. The final pH after all that was 6.3. The runoff pH was 5.6. She is still looking good, but you can tell she’s getting ready to start getting to her end stage. I wait with baited breath! The tent was 81.7F, with a humidity of 56%. We’re almost there! Happy growing everyone. 7/18/22 Today I’m going to keep this note brief… I promise. Stella is continuing to fatten up getting ready for harvest in a few weeks. She is still doing well. Today she received a gallon of water mixed with the ripen stage nutrients again. I changed all of my jugs, but after mixing everything up the initial pH was 5.5. I added 8 ml’s of pH UP which adjusted the pH going in to 6.2. Her runoff pH was 5.6. The tent was 83.3F, with humidity at 58%. See! A short note is possible!! Happy growing everyone. 7/21/22 Stella and all of her children were fed today. As usual, a day later than planned, but they got fed, and are all still doing wonderful. We’re keeping with the ripen nutrients mixed into a full gallon of water. FloraMicro - 5 ml FloraBloom - 15 ml Floralicious Plus - 1 ml Liquid KoolBloom - 2 ml Initial pH was 5.2. I added 12 ml’s of pH UP which adjusted it to 6.2. She had plenty of runoff with a pH of 5.8 The tent was 83.9F, and humidity was 52%. Her buds are FAT!! Happy growing everyone!

what a resin monster! such beautiful plants! one of the 2 phenos had straight peanutbutter flavor!

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

Day 36: Girls looking pretty happy. Still some discoloration going on. Doesn't look to be spreading though. Day 37: Ok, the girls obviously were not happy this morning. I watered with quite a good amount of runoff and measure the PPM at 3200!!!!!!!!!!!!!!!!!!!!! I'm surprised they are still alive! Had to make a quick run to get some water for a flush as I only have 5 gallons worth. Ran 2 gallons through each of them at a ph of 6.4 around 9:30 this morning. It's now 5pm and they have pulled through great. These OG Kush are extremely resilient. Day 38: The girls look way better today after flushing yesterday. Two of the pots were almost completely dry already. Went ahead and fed at 500ppm with runoff. Day 39: I think it's dialed in now. They are looking amazing and still stretching pretty good. Went ahead and pulled off a handful of leaves between the 5 of em. Day 40: Did a little more defoliation and opened them up a bit. I am super worried about getting any type of mold or any issues in particular for this first round. One of the girls needs a touch more but ran out of time. Girls are looking super healthy! 💪 Day 41: They are looking super awesome. Got the runoff dialed in. 750 going in and roughly 800 coming out. May up it in a week or so. Day 42: Nothing new to update. Girls still looking amazing. I think the stretch may be slowing just a tad.

Su una Alberta iniziano a cadere le foglie, forse sto tardando troppo per i 10 giorni di Ripen… Crescono benissimo, tutto sembra semplice.

14.5 Ich musste die Ladys in den Schatten stellen, nach paar Stunden in der Sonne ist die eine schon leicht gelb geworden. Aber im Schatten wachsen sie perfekt weiter, das Gelbliche an den Blättern ist jetzt auch wieder grün. Die woche verlief im ganz gut Wetter war zu gut für die kleinen aber in einem guten Rhythmus mit Schatten sind die sehr gut geworden. Die strawberry ist am schwächeln versuche momentan raus zu finden was los ist Updates in der neuen Woche

I could have pushed the plant one week longer but im on a scedule

I’ll be harvesting this lady next week! Super frosty and very happy with the yield and density considering she is in a tiny coke can 8.5 oz. Smells sweet, dense, and yummy! Just trying to keep her upright and watered—- starting to flush now. ✌️💚🌿💨

Week 8 day 56. Trichomes are turning milky, most still clear. I should of defoliated before but this being my 1st auto flower and me being a newbie I didn't want to take the chance. Lessons learnt for next time. Day 61. Approaching 9 week mark. Buds are getting frosty. Not sure if I should give more nutrient or just continue topping up with water. No sign of amber. Pistils on top buds are changing to brown.

30/08 Les filles commencent a montrer leurs premiers signes de maturité sexuelle. Des que j ai un peu de temps je reorganise la tente avec un tri male femelle. Le plus beau des males et le plus odorant sera gardé les autres seront écartés.

To update...

Diese Woche wurde die Apple Strudel defoliert und Pound Cake etwas weniger . Man merkt das die Pound Cake 2 Wochen weiter ist anhand der Blüten Bildung. Sagenhaft das Pound Cake auto nur Leitungswasser ohne PH bekommt wegen ihrem Dopesoil. Echt gamechanger !es macht mir so Spass. Heute 31.01.2025 wurden nightshoots von Pound cake auto hinzugefügt!!🤞🏼🤞🏼🧑🏼‍🌾🔥💚🧑🏼‍🌾

Do-Si-dos auto has grew well. She has a strong fruity, citrus aroma. Smells really good. The colas didn't get super big, but looked to be very frosty and dense. This is my first time trying this famous strain. It looks like it will be really good. I never had any huge issues during the grow. I also didn't juice her with nutes like I normally do to others in flowering. I am curious to test the results once I get her processed. Thank you Zamnesia seeds, Athena, and Medic Grow. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Was hoping to have them all ready for the chop in under 90 day but starting to look like just 2 of them 🤔

I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!