So far so good. Seems to have taken well to the LST. I did notice the early signs of CO² deficiency and added an organic CO² producer on day 37. Hopefully that spurs the growth. Last frost is in a little over a week. After that I hope the power of the Yukon sun can really give it a boost in its final weeks.

19cm vertical growth this week. Flowers developing.

Second week of bloom: steady growth is visible on both. I incresed the bloom nutrient ratio to 3ml/L Water. Atm I have to water them everyday with 1L Water, I have the feeling that my dehumidifier is pulling more moisture from the soil that I would have liked. 2nd picture shows that both Exodus have different shades of green although both follow the same schedule and feed plan. I switched positions in the tent, maybe it’s due to the air circulation. As always I‘ll add more pictures throughout the week. Now back to Final Fantasy VII Rebirth 😘 Update 05/03: Took a couple of pictures plants are gaining in height, I added 0.5ml Calmag to the Water once this week. No sign of Cal or Mg deficiency but I added it to prevent during this major height growth phase.

March, 30th One Plant was ready, and was Harvested today She smells like fruit Bubblegum. Buds are smaller but very solid The other Plants still flowering, and smelling very much and quite deilicious They are drinking like Barmaids, around one LLiter per Day Feeding every other Day. And Buds are swelling more and more each Day. Its a big Fun to open the Tent UPDATE The Harvested Buds are shiny like diamonds,,, gittering allover, nice dense Buds

welcome to Week 15 of our Lego Ninja Tropical Tangie Run. This week was a bit of a rollercoaster as we faced some high temperatures. Our resilient Tangie made it through, though her leaves took on an interesting appearance. But don't fret; the buds remain unaffected and continue to dazzle. She's as frosty as ever, a true beauty to behold. For the sake of our full-time lapse project, I've decided to let things ride as they are. We've captured it all, from the ups to the downs, showing the unfiltered journey of this incredible plant. In the garden, my Tangie's pH levels are at a steady 6.2, and her TDS hovers around 490. The water temperature stays at a comfortable 20°C. Sharing a bit of moon magic, I've included some photos of the recent full moon. It was an enchanting and blessed sight to behold. As always, my medicine is shared not only with my Tangie but also with my faithful guardians, the Lego Ninjas. They've been by my side throughout, offering their silent wisdom and unwavering support. I've also been experimenting with my cameras, exploring different perspectives and colors to capture the essence of this journey. It's incredible how small adjustments can reveal the hidden beauty of our botanical companion. I must extend my heartfelt shout-outs: to Dutch Passion for their exceptional genetics, to Aptus Holland, my valued sponsor, for their incredible support, and to Grow Diaries, the platform that allows us to share this adventure. And a special thank you to our amazing community. Your encouragement, insights, and camaraderie are deeply appreciated. It's your support that keeps this journey thriving. As we venture into the next week, I'm excited to see what awaits. Thank you for being part of this botanical odyssey. Until next time, fellow gardeners and enthusiasts. #TropicalTangie #Week15 #BotanicalJourney #FullMoonMagic #GrowDiariesCommunity #AptusHolland #DutchPassion #LegoNinjas As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3 P.S- I must extend my sincerest apologies for the missing video reports. Regrettably, Grow Diaries is still facing some technical issues that are preventing me from uploading them. Rest assured, as soon as the situation is resolved, I'll share those videos to give you an even closer look at this fascinating journey.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hi everyone :-) . This week she has continued to develop very well. She reacts very well to the training :-). It was poured twice with 1.2 liters each this week. Everything was cleaned and refilled. Stay healthy 🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

8/24 update: Welcome back to my garden! Thanks for following me on this 17+1 strain photoperiod SOG grow adventure! Yes, I said plus one. If you're following me, you may have already seen that I decided to sow one more strain. The first Jenny Kush seed didn't germinate and even if it did, we have 3 possible males in the garden, the rest are feminized. Since I bought sixteen 12 inch square pots to fill a 48" x 48" footprint, and we have some regular seeds in the mix, I figured it'd be a good idea to add one more strain. I went with another breeder I have never grown before, Expert Seeds. The strain is Gorilla x Cookies. My "helper" forgot to wet the seeds after I had sowed them and the top soil was a bit dry. I was not in the garden a little less than 48 hours and I gave them water when sowing, but I hope they didn't dry out too much. If the Gorilla Cookies doesn't germinate, I will rule that one as user error and not on the breeder. The rest of the garden is growing strong with the exception of the Sour Lemonaid. She sprouted looking a bit burnt and has some deformed leaves. In my experience, they usually grow out of it, but only time will tell. Thanks for stopping in and if you get a chance, check out a few of my other diaries and give me a follow. Happy growin', happy harvestin', and happy tokin'! Peace, ☮️ Love, 💚 and Frosty Nugs! ❄️🌲 - Fo' Twenny

Esa familia, otra cosecha más, no tan contento esta vez la variedad en si está buena pero su cultivo es algo complicado y no está estabilizada la genética, los días de floración son más de 55 días como dice el banco,más de 3 meses de floración con estos ejemplares... Pero mereció la pena esperar el colocón es bastante fuerte, para mi que , sativa dominante a mi parecer, 24% de thc , cruzada entre cookies x OG Kush , muy productora en general. Así esto es todo , pronto más trabajos, buenos humos familia.

Massive colas from do si dos.

Hallo Freunde 👋 es wurde Zeit und Big Demon wurde der Schere zum Opfer! Dieses Mal wurden die buds am Ast getrimmt und ab in die Kiste! Mal schauen was rauskommt!

I most likely overfed the week before but didn't realize it. We'll carry on and live with it, but it'll get worse in the next weeks. One of the plants (top left in the video) has quite the strong smell now, while the others hardly smell at all.

Started training them out and did some super cropping on some taller sites to even them all out will do some more topping once they get taller.

Trichs seem to be further along then last grows, I can only assume the extra light and/or higher heat has cause them to finish a bit faster. Right now we are sitting on a majority of 70% cloudy, literally only a couple ambers through out. Wanting to harvest a little earlier this grow, hopefully day 59 or 60. Sooooo, 10-11 more days till chop. Day 51 Starting a flush, drained and filled with tap water, 2mL/L of flushing agent to help dissolve/bind salts. 3 hour cycle runtime with flushing agent. Drain/fill with high quality ROH2O, pH’d, H202 for disinfection.

From the looks of it. I am in early stages of root rot. Plant is not growing as fast as it was at all. It can be a few things. Light penetration into the bucket. My water temps are around 70f. So I think that's okay. I had some extra mylar from a grow I did years ago. Cut pieces to go over the kids hopefully that helps. I took out all additives besides CalMag. They were fouling the rez as usual. Dropping the Ph as usual. I think it's also the cause of the root rot. I have sprayed soaked with h202 and have added it to the reservoir after a cleaning and a water change. Looks a bit better. I'm located in Canada and I cannot find hydroguard anywhere. Which kinda sucks. Any alternatives would be great. Thanks

Der Samen kam aus der Erde, und damit er sich nicht streched hab ich das licht etwas herunter gelassen. Die Luftfeuchtigkeit war bei 35%, dass habe ich aber wieder im griff da ich eine Sprühflasche habe und eine Kuppel über den Setzling hatte. Bewässern brauch ich kaum da die Pflanzen wenig Wasser brauchen. Da die TS600 bei 60% Leistung nicht allzu heiß wird es ist aber auch Winter. Montag habe ich meine Spuckpalme dazu gestellt da die vielleicht etwas die Luftfeuchtigkeit reguliert ich hab keine Ahnung ob das stimmt ich wills auch nicht googlen wird schon funktionieren und wenn nicht sprühe ich sowieso regelmäßig mit einer Sprühflasche. Die Spuckpalme sah mir sowieso zu traurig am Fenster aus. Die Temperaturen waren am Wochenende im Zelt sehr hoch Sonntag Nacht hatte ich 5 Stunden lang circa 30°C-32°C. Trotzdem haben beide Pflanzen es super bestanden. Ich habe zum Umtopfen nächste woche einen 8L Topf, Mykorhiza und Wurmhumus gekauft. Dazu noch den Biobizz Indoor Dünger.

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

They finally started stretching a bit. Had me worried that they would be forever stunted.