Hi meine lieben, 🤗 Die 2. Woche der Wachstums-Phase steht an... ..und die realität schlägt zu. Hatte versucht diesen Run mit einem höheren VPD-Wert und dadurch ohne zusätzliches CalMag hinzufügen zumüssen laufen zulassen. Da laut einer Studie, man durch einen erhöhten VPD, kein zusätzliches CalMag unter LED's hinzugefügt werden müsste. Allerdings gieße ich noch mit Leitungswasser. Also hatte ich mir mal die werte meiner Stadtwerke angeschaut. Und in meinem Wasser habe ich Calcium = 78 mg/l und Magnesium = 5,3 mg/l und somit ein verhältnis von 14:1😰. Was von einer Optimalen versorgung von 2:1 - 4:1 CalMag etwas entfernt ist... 😅 Beste Lösung wäre ein Filtersystem wie der Watertrim zu nutzen. Günstiger ist es Mono-Magnesium (oder bei bedarf Mono-Calcium) zu besorgen und das Wasser im richtigen Verhältnis auszugleichen. _________________________________________________________ Optimale CalMag-Versorgung in den einzelnen Phasen: Sämling: Cal: 50-60 mg/l Mag: 20-30 mg/l Wachstum: Cal: 80-100 mg/l Mag: 30-50mg/l Blüte: Cal: 100-120 mg/l Mag: 40-60mg/l ______________________________________________________________ Wie mein Ablauf in dieser Woche genau aussah, habe ich auch diesmal für uns Dokumentiert. Ich wünsche dir viel Spaß & Happy Growing 🌱🤗: _______________________________________________________________ Umgebungswerte der Woche: - Temperatur: 25°C - Luftfeuchtigkeit: 65% - VDP (Room): 1,1 _______________________________________________________________ Tag 8: - Nur beobachtet 😋 Tag 9: - Pflanzenhöhe gemessen: 20cm 🌱 - Stamm-Durchmesser gemessen: 0,44cm = 44mm Ø - Licht Intensität eingestellt - PAR - PPFD: 320µmol / DLI: 21 Mol Tag 10: Bewässert 👇 (Leitungswasser): - Volumen: 1000ml - PH-Wert: 6,15 - EC-Wert: 0,46 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,7 - EC-Wert: 3,6 - Temperatur: 21°C - Volumen: 220ml Tag 11: - Nur beobachtet 😋 Tag 12: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 1,52 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,7 - EC-Wert: 3,2 - Temperatur: 22°C - Volumen: 260ml Pflanzen Training: Topping, Vor-Lollipopping Lampenabstand eingestellt: 50cm Licht Intensität eingestellt - PAR - PPFD: 300µmol / DLI: 19,5 Mol Pflanzenhöhe gemessen: 22cm 🌱 Tag 13: - Nur beobachtet 😋 Tag 14: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 0,48 - Temperatur: 21°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,4 - EC-Wert: 2,95 - Temperatur: 21°C - Volumen: 160ml Pflanzenhöhe gemessen: 25cm 🌱 Stamm-Durchmesser gemessen: 0,67cm = 67mm Ø Lampenabstand eingestellt: 40cm Licht Intensität eingestellt - PAR - PPFD: 350µmol / DLI: 22,7 Mol

This week went real great , one has been getting flushed and the rest we will start flush Tomorrow! These ladies are doin so amazing! Hope you all enjoy !! Stay tuned for next week! Cheers an happy holidays!

Cambiamos de fotoperiodo y las plantas rápido han pegado el cambio y ya sacan los primeros pelitos

WEEK 20 Soooo, we’re pretty much at the end now. I harvested the plants on the last day of this week, and I was thrilled. During the final week, I mostly watered with plain water, except for a bit of Green Sensation that I added. I let my CO₂ level drop to 600 ppm and also dialed back the light a bit—down to around 700 to 800 PPFD. Unfortunately, it was still quite warm here this week, so I didn’t manage to lower the temperature any further. It’s definitely worth doing, especially in the last few weeks. But in my opinion, turning off the climate unit isn’t really worth it, so I kept running things pretty hot. The plants didn’t seem to mind the temperature much in my case. I had consistently high temperatures throughout the flowering phase, but I’ve been supplementing CO₂ from a gas bottle, which significantly increases their tolerance to heat. Overall, the buds really got another nice boost over these last few days. I think you could let them go even longer if that suits your taste. But I’m excited to harvest now. 🙂🙂🙂

Hello boys and girls we’ve officially reached the finish line! 🕺🏾🎊🍾 It’s been an amazing experience growing this strain. This week we wrapped things up and flushed using Flawless Finish. Tropicana’s colors showed out with some buds going purple, her profile is a real nose-pleaser and I’m pretty happy with how my trichomes are looking (all turned milky with very few ambers) She was thoroughly set free from the salts, and after her final watering 4 days ago I just let her ride it out. Right after these photos, she’ll be chopped and set to dry! I’ll be back with updates once she’s dried and I begin the curing process. 🤝🏾 It’s been a pleasure growing this beauty alongside all of you thank you for the encouragements. Mama Tropicana sends her love too 😊 I’ve got other strains running in the garden from Fastbuds and more, so feel free to follow along. A great harvest season is upon us 🙌🏾😋 Happy growing and happy weekend, gang! 💚

27/02/19 - This one is great, I popped the seed 24hrs after the gelato and this one seems to be developing its leaves a lot faster than the rest, so far really happy with DNA and with mills nutrients, it’s a lot easier to mix and I no longer have to use ph down because once all mixed it’s at a 5.8/5.9. 👌🏻 02/03/19 - Just transplanted all into their final pot, just in time I think as it looked like the roots were starting to circle at the bottoms of the pot, sprinkled half a tea spoon of Mykos on each hole prior to the transplant & fed them 2.5 litres each. I was going to saturate the whole pot but I’ll do that next feeding.

Another rough week. Thought I got aphids but now as I'm posting this after some more research it looks like I may actually have Neoseilulus fallacis. I only sprayed them down with water and got lady bugs. Been sick the last week as well so I cant really smell whats going on. Been having a hard time keeping the humidity below 60% at night but i finally found a budget dehumidifier that works okay

Day 128 it’s good smells sweet and every time I walk into my room it smells like gas Even though quantity is lower then I expected, the trichomes are crazy

And it starts like this. an official collaboration starts with the friends of Zamnesia, from today I will only grow, grow and flower Zamnesia Seeds plants and I really like it. We are close to a flowering in the extreme heat and therefore we opted to start with 4 very fast F1s, they are not joking guys when they tell you that they are made to be more resistant, stable and fast they are not telling you something false. The girls are super fast, even those from other brands tried in the past are excellent and a sliver and this one from Zamnesia have all it takes to be the best autoflowering on the market. The Wurlz F1s were also born at the speed of light, 18 hours in water, 24 on land and we were already born, both of us. Oh yes, a lot of research is being done on autoflowering plants, you have all noticed monstrous improvements compared to Low Rider and subsequent derivatives. Whoever works best wins and from what I have been able to see so far Zamnesia is working very well. I know, there is a group of sceptics, friends I'm here on purpose, give me a couple of months and we'll see. Zamnesia is the best online shop in the situation, you can find everything from seeds, to mushroom kits, through vaporizers and a thousand other things https://www.zamnesia.io Wurlz F1 seeds specifically https://www.zamnesia.com/10669-zamnesia-seeds-wurlz-f1-automatic.html Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest.

Ok week 6. So putting my eyes to the plants and found out that, we have 1 confirmed female. I named her "Shiori"! There is one unknown sexed plant and three (mostly) confirmed males. Shiori was the one I wanted to be female due to her indica leaning leaves. I will take some cuts of Shiori before I flip. Sunday update... I decided to put these plants in the flower tent with their sister (Falda) who will be harvested in a few weeks. Depending on which male shows some vigor, I might keep his pollen to possibly create f2's to pollinate three females (Bratz, Falda and Shiori) Wish I could document all the grows I have going on right now but it's alot. Sunday update: I decided to move the five plants into one of my flower tents. Shiori was cut for clones (4), the rest weren't cloned because of assumptions of 3 males and 1 unknown still. Another AC infinity oscillating fan was added to the tent they are in. More updates soon.

Die Dame wurde erst komplett entlaupt und dann zerlegt. Jetzt liegen sie im Kräuternetz, verpackt in Dryferm Beutel und ich muss geduldig warten.

🌱🌱🌱Continuamos este cultivo, con esta hermosa cepa de FastBuds, Girl Scout Cookies Auto, de lleno en el periodo de Floración .🌱🌱🌱 👨‍🍳👨‍🌾🏻 Nutrición y Bitácora 👨‍🌾🏻👨‍🍳 -Día 29. Sigue creciendo vertical. -Día 30. Se riega con una solución nutritiva NPK de 1.5 Litro con Plagron Power Roots (3.75 ml), Plagron Pure Zym (1.5 ml), Plagron Alga Bloom (3 ml) y Plagron Sugar Royal (0.75). -Día 31. Se riega con una solución nutritiva NPK de 1.5 Litro con Plagron Power Roots (3.75 ml), Plagron Pure Zym (1.5 ml), Plagron Alga Bloom (3 ml) y Plagron Sugar Royal (0.75). -Día 32. Se riega con agua 700 ml de agua declorada, y se realiza una leve defoliación para mejorar la penetracion luminica y despejar brotes tapados por hojas grandes hacia el interior de la planta. -Día 33. Se riega con una solución nutritiva NPK de 3 Litros con Plagron Power Roots (7.5 ml), Plagron Pure Zym (3 ml), Plagron Alga Bloom (6 ml) y Plagron Sugar Royal (1.5 ml) + la adición de Trichodermas (1.5 ml). -Día 34. Responde bien al riego con 3 litros del día 33, ya casi seca el sustrato y sigue creciendo y formando mas flores🌺💪. -Día 35. Se riega con una solución nutritiva NPK de 3 Litros con Plagron Power Roots (7.5 ml), Plagron Pure Zym (3 ml), Plagron Alga Bloom (6 ml) y Plagron Sugar Royal (1.5 ml). 🚀Equipamiento🚀 Indoor de 60x60x159 cm y una iluminación BlackCob F320, se activa solo 1 modulo (160w) a 45 cm del canopy por el resto del cultivo. Intractor de 135mm, extractor de 135mm, filtro de carbón, ventilador "oscilofan", ventilador "clip fan", este ultimo ventilador se ajusta en la parte baja de la carpa para mejorar la circulación de aire bajo el canopy, 2 termohigrometros y una malla SCROG de kanovi a 15 cm de la maceta. Acompáñenme para ver los resultados de este hermoso desafío, un saludo cultivadores 🔥🔥🔥

Leave are still droopy, oh well she says been like that since day 1 but is clear contender in front of the Cheese started same time. Nice bushy structure just like in the 1960-70s👍😂

Se ha realizado una defoliación muy fuerte esperemos una evolución positiva, aplicaremos tricoderma para evitar hongos luego de este procedimiento

I'm happy with the yield, thank you barney's farm!

another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!