~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 😻 We did our typical 3rd week defoliation earlier and managed to pull a few cuttings from each plant to clone...Bud sites are becoming way more prominent this week and all plants are praying hard to the MarsHydro. We've increased bloom nutrients and they seem to be responding well to it.. color is great, we couldn't be happier and with how things are going..we intend on dropping the MarsHydro a few inches today and will update any changes midweek..thanks as always for dropping by and happy harvests everyone!!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 03/09/23 We increased bloom nutrients again (10ml/gal), they're eating with every watering now (4th water only).. these happy trees are praying hard to the MarsHydro!!😻 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Week 9 This week has been fairly busy in the tent. I have defoliated a couple of times and there has been a lot of tying the plant down. I also connected all my top off lines and drain lines. The top of my tent was a bit of a mess with cords and cables etc so I cleaned that rats nest up and that gave me the warm and fuzzies when I was done lol. I raised my lights up to where I hope to flower so that way the plant can grow up into the lights when the stretch hits. I have not reached 16 tops yet but I will be topping in the next few days so I am very close to the desired number of tops. I have not changed anything inside the cooler either. It’s the same ppm, pH etc as last week. I love how healthy this plant is even though I have not done a water change in 9 weeks lol. That’s blasphemy is some circles lol. 😎🌱🍻

Hey growers. This week I decided to water with a heavier ppm as the plants didn’t seem too happy. They were showing some yellowing on the lower leaf tips. Guess I was right bc they exploded up to about 12” +-. Then I decided to top and LST the main stem. Today I just adjusted the ties, removed 1-2 leaves from each plant depending if there was any in the mud or not. Yesterday I watered with 525 ppm, but unfortunately the water was a bit on the cold side and they’re having trouble soaking it up. I have since created a rez in my grow room just to hold RO water at approx 70 degrees. So that problem should be rectified. I think I’m right on the cusp of preflower as I’ve seen one or 2 pistils. Regardless they’re doing their thing and I’m trying to do as little as possible to keep them vegging as long as possible and end up beastly!!! Happy Growing 🌱

Hey growers. This week I decided to water with a heavier ppm as the plants didn’t seem too happy. They were showing some yellowing on the lower leaf tips. Guess I was right bc they exploded up to about 12” +-. Then I decided to top and LST the main stem. Today I just adjusted the ties, removed 1-2 leaves from each plant depending if there was any in the mud or not. Yesterday I watered with 525 ppm, but unfortunately the water was a bit on the cold side and they’re having trouble soaking it up. I have since created a rez in my grow room just to hold RO water at approx 70 degrees. So that problem should be rectified. I think I’m right on the cusp of preflower as I’ve seen one or 2 pistils. Regardless they’re doing their thing and I’m trying to do as little as possible to keep them vegging as long as possible and end up beastly!!! Happy Growing 🌱

Hey growers. This week I decided to water with a heavier ppm as the plants didn’t seem too happy. They were showing some yellowing on the lower leaf tips. Guess I was right bc they exploded up to about 12” +-. Then I decided to top and LST the main stem. Today I just adjusted the ties, removed 1-2 leaves from each plant depending if there was any in the mud or not. Yesterday I watered with 525 ppm, but unfortunately the water was a bit on the cold side and they’re having trouble soaking it up. I have since created a rez in my grow room just to hold RO water at approx 70 degrees. So that problem should be rectified. I think I’m right on the cusp of preflower as I’ve seen one or 2 pistils. Regardless they’re doing their thing and I’m trying to do as little as possible to keep them vegging as long as possible and end up beastly!!! Happy Growing 🌱

Last auto i'll grow , autos are actualy good for fast and not so heavy stoners , my yield is good but not the way i want it , so i'll keep improving my shit , starting with femenised seeds next run also a blueberry , first femenised im going to use , so lets hope it will have a better harvest. Overall this autoflower blueberry yielded the most of all my autoflowers , dense buds , good quality and very fruity smoke!

Last auto i'll grow , autos are actualy good for fast and not so heavy stoners , my yield is good but not the way i want it , so i'll keep improving my shit , starting with femenised seeds next run also a blueberry , first femenised im going to use , so lets hope it will have a better harvest. Overall this autoflower blueberry yielded the most of all my autoflowers , dense buds , good quality and very fruity smoke!

Hello, This plant is not as big as her sisters but the buds are pretty tight.. Has been a easy plant to grow and I look forward to watching her finish! Have a great day😎

New week for the 8 strain 12 plants grow The transfer all plants into the 11 L went great and growing nicely Purple Berry Kush is bin put together in one 18L pot and want to get adventures with the training 6/3/22 Super Critical Bud CBD has balls so he's out the group 9/3/22 Training begins top a couple couple day's ago and beginning to LST them Banana Punch and purple berry Kush still to small to train. And i think i only gone train the purple berry Kush and let banana Punch grow on it's own no topping no LST Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter