Recommended
Likes
Comments
Share
@tokesly
Follow
Everyone says the plants smell amazing but I can't smell them! fml. They're supposed to smell like guava candy. Just gotta rest up more till my smell is back, honestly the worst thing about covid. Started flush this week, going to flush for 10 days including a 48 hour darkness period. The darkness period is when the buds can reproduce the trichome coating. It's normally used as sunscreen for light protection but much is burned off during intense day times. This is why it's best to harvest after a period of darkness.
Likes
12
Share
The girls have survived another week ❤️ I did a light defoliation and have been monitoring the RH closely. We have had a very damp week here, and the RH kept climbing and had my fan working hard. They are starting to plump up and fill in 😋. They have also started to slow their drinking habits, instead of watering every three days, it has moved to every 4 now. Just a couple of weeks left, I think I will be harvesting these over Christmas 🎄, and will have some great bud ready for the new year! 🎉🎊🍾
Likes
20
Share
This week we were away on vacation. And had 2 friends house said for us these pictures were sent to me from him. He reported to me this week that Asoka was the only plant of all my plans that didn't give him any problems she's such a good girl! Honestly he fell in Love with Genehtiks AK47 Goxuak, so much he insists on being here for the harvest 🤣 He also Flushed her once for me. He used Cyco Platinum "Kleanse" in 5gal of water PH'd to 6.6 to help break up any salts in her medium. (Idk if it was necessary) Stats: Ohahu(not reccomended)4x4 tent 1gal water pitcher Fox farms happy frog soil Optic 8+ LED Durabreeze carbon filter 4" inline fan
Likes
5
Share
brothers sisters. this journey was wonderful. From the first month I knew this was going to be a wonderful experience and I was right. with the flower was not lead time no problem. I would recommend this model to anyone who likes fragrant flowers. and especially giant flowers. thank you for watching. and many thanks belong mainly to the @originalsensibleseeds . 💚💚💚
Likes
1
Share
@Pestitel
Follow
Amazing experience with the Mix Pack, I will try it again next summer for sure. Love the variety.
Likes
7
Share
@Famtreez
Follow
crazy week found drain gnats which explains the green hue of some of my plants the larve are attacking the roots raising the p.h. and the diffecencies are showing in the leaves being lighter and or brown dots on the leaves. using mosquito dunks and spraying neem oil washing the roots to help these ladies out. also im doing things different with the soil vs dwc, i havent done much if any defoliating with potted plants just letting them grow only mainlined once and since in flower very light if any defoliating. any questions comments information feel free to ask or inform im open to critque
Likes
13
Share
@knicko
Follow
Auf der Waage im getrockneten Zustand waren es 130g somit habe ich mir den Fixkosten ein €/g von 2.55€/g das finde ich nicht schlecht
Likes
52
Share
You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.
Processing
Likes
6
Share
Plants are looking really healthy. Defoliated again to get more light for bud sites. Lowered humidity a bit.
Likes
1
Share
#1-03/02/23 the first one to come down!!! Will update as I chop them down!!!
Likes
10
Share
@1juan420
Follow
All pictures were taken on day 43 She is definitely in 1st week of flowering and stretched a lot the last couple of days She grew a massive stem. It is many times thicker than the photoperiodic stems🙀 I gave her 600ml tap water with 1ml/l BioBloom, 1ml/l TopMax, 0.3ml/l BioGrow added end of the week
Likes
11
Share
Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. This week I'll decide whether it goes straight into the flower tent or is pruned again. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
19
Share
@Mazgoth
Follow
The plant is eating well and I’m giving more bio heaven,I used only twice the acti-Vera,Alg-A-Mic.
Likes
3
Share
@babaweed
Follow
The plants are really beautiful with this huge top, the flowers underneath are large and very fragrant. They are dark green and white really nice. The resin is really sticky and fragrant, I can't wait to harvest
Likes
17
Share
@Justjewit
Follow
So it's the start of week 3 , to say the plants had a very randomised environment up until this point , and 2 plants are in 1 pot ...... all 3 aks are looking good . Soo I'm going to keep them in the room , can just make friends with my new strains I want to put in there .... sure they will get along
Processing
Likes
26
Share
Como estáis fumetillas, yo estoy flipando, y es que las flores de estas skunks son como rocas, y no solo lo compactas que están si no que están bastante tricomadas, las 3 a cada cual más , lavamos las raíces y ya estarán solo agua, dejemos que termine de florecer y madurar, tampoco hay prisa, ph controlado temperatura ideal, bajamos algo más la humedad, puede que tengamos que tuitear alguna pero estoy evitándolo, se irá viendo estos días, ya nos veremos esta semana que viene un saludo familia y buenos humos.
Likes
18
Share
@CRK00
Follow
9th Week Report 12/12/19 - 19/12/19 In photos CMXL is on the left and LSD on the right 12/12/19 Unfortunately humidity at 80% and since is too high from next week I will try to give them more aeration. Hope there won't be mold. Changed solution and raised its strength to 90% and unlikely the last change I didn't added a small quantity (0.5/L) of "grow" nutrient as both are in full flowering 13/12/19 CMXL got a bigger defoliation and now you can see even more bud sites! 😁 Just waiting for her ;) Looking to LSD I guess next week we probably will be ready to harvest. As you can see she almost has no more space, CMXL is giant (and beautiful) and she is starting to cover LSD, but hopefully LSD will be harvested soon and consequently CMXL will have all the space she needs. CMXL was defoliated every couple of days, the quantity of leaves that were removed during every defoliation session is more or less like in the photo uploaded. However it looks like CMXL is not anymore stretching and just fattening up, so from the next week will get light defoliation just when needed (if she will cover everything again like last week probably will get one more last stronger defoliation). Any comment or suggestions is appreciated, especially if you have tips about LSD time to harvest! Thanks in advance dudes 😁👊 Last Update 19/12/19 See you guys ;)
Likes
36
Share
Flowering day 21 since time change to 12/12 h. Hey everyone 😃. Both phenotypes are developing very well 😊. The buds are starting to develop, so I have now added 2.5 g per liter of GHSC Powder Feeding bio Bloom substrate. This week it was watered twice with 1.1 l per plant each time. The humidifier was refilled and the tent cleaned. Let's see how they look next week 😍 Until then, I wish you lots of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .