4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

Feeding: Brown Sugar, Vinegar, Epson Salt, Blueberry Water, Braggs Amino Acids, Fish Water, Kelp, Alfalfa, Sea Bird Guano Gumbo

36 день с перевода. Увеличил световой день до 14 часов. 36-42 День.

Pretty happy with her setup now shes reached the edges of pot. I plan to just try keep her tied down while the middle catches up. I'll let her get some vertical growth after that and flip when im happy shes good to go. She is now just on full feed Lucas forula (GHE Micro/Bloom) with some calmag. Took all her nutes well showing no signs of deficiencies and caused no grief whatsoever.

All being flushed now,.. 2 have come down today, 1 blackberry and the purple lemonade,... rest will come down Saturday except the strawberry banana

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

Alles Top.Wenig Arbeit und viel Freude 💚💥

They girls really are super sticky at this point i really hope they get a bit bigger tbh. Hopefully the last few weeks they will fatten up nicely. I believe I scroged them a bit to late for autos and may have casued to musch stress for them to recover in time. We will see. Peace Charlie

NOTES: I've flowered my babies for 42 days at the beginning of this week. Keeping EC at 1,4-1,5 / pH at 6,0-6,2 and nutrients as before. I'm propably starting to flush after this week. Day92 (16.1.) Took some pictures/videos for the diary and refilled the tanks with 40l of fresh nutrient solution. Day93 (17.1.) Day94 (18.1.) Day95 (19.1.) Day96 (20.1.) Day97 (21.1.) Day98 (22.1.)

Again some slight defoilation due to white fly issues (solved). Super stretch and flower development. This splant started squat but really gained in height this week!

Gut

11/26/24 11/27/24 this plant is blowing all expectations. this was the least promising looking pheno. these buds are so fucking dense. the trichomes are visibily standing ontop of the buds. the plant is 75% bud with 15% stem and 10% leaf. she is visibly fattening daily. i cant get over how hard these buds are though. the nodes are all growing into eachother and turning into long fat colas. absolutely beautiful genetics and im excited to see what the other phenos

This week was cool really happy the GP started budding thought it was gonna turn out to be a photo but nope we have pre flower folks. Since the the GP started flowering two weeks Later I’m going to feed her differently than the BC cream. I top dressed the black cream on Day 44 using Root Organics bloom and grow 3:1 ratio but not the GP I will after two weeks maybe even 3 as she’s been battling a lil nutrient burn from the soil her whole life span soil waiting won’t hurt. I’ve also been adding Terpinator (recommended dosage) every water. Check out the vid I really thing I have a monster harvest coming as long as these ladies stay happy 🤙🏾 Lmk if there’s anything I should be doing or looking out for the help is always appreciated 💯

Bueno Farmers un error por ni contar la época de Pre-Flora entramos ahora semana 2 de flora, ya empieza salir la resina...sobre todo la Royal Gorila. No podremos pasar a led de momento próximamente mas novedades compañeros!🍁

It's safe to say she was reacting well to LST so far. It's time to stop pinning down and let her grow vertically as now she is showing signs for pre-flower. I lowered the light's position a little and cranked the DLI value up to 30. Also, dropped down the humidity to 60%. From this week I will give her 2.5L of water.

The bonsai creation is in the very end..... Actually ready but i want more amber trichomes to get more body high than mind one.... Nice little creation... waiting for to be cut I expect to be done in 1 week but trichomes speak.

7/11/25 New week babieess😍😍!!!! 7/13/25 Ohhh baby, the Mephisto experiment is cooking so so good right now. I’m actually kind of stunned at how things are evolving, especially with Forum Stomper, a.k.a. Stompy the Comeback Queen. She had kind of a rocky start — I mean, cotyledons were looking funky, and she went all bush-mode on me: dense structure, super tight internodal spacing, real short-stack energy. But oh no no, she wasn’t done. Fast forward to now... Stompy is a straight-up MONSTER. A chunky, thriving beast that just keeps getting bigger — and I know she’s not done yet. She’s officially stretching into flower now. Not just hinting at it — nah, full flowering stretch is underway, and she’s reaching up like she just realized she’s got room to take over the whole tent. I love this part. Today was watering day, and both girls got their special cocktails. First up, Grapey. She drank 4.4 liters of love, with her mix spiked up with BioBloom at 16 ml, Topmax at 12 ml, BioHeaven at 16 ml, Activera at 16 ml, Agamic at 12 ml, and a touch of CalMag at 3.5 ml. She’s hitting flower hard now too, and this brew should set her up to swell up sweet and loud. Going in: pH 6,23, PPM 510 Temp 22,5 °C Runoff: pH 6,47, PPM 1350 Then we’ve got Stompy, the Comeback Queen. She got 4 liters of her own nutrient-rich mix: BioBloom 12 ml, Topmax 10 ml, Activera 12 ml, BioHeaven 12 ml, Agamic 10 ml, CalMag 3.5 ml, and just a whisper of CicaMax at 0.3 ml to finesse that vigor. Oh, and let’s not forget — she also got her guano top dress today. I scooped out one of my little measuring cups, sprinkled it in like fairy dust, and let nature do its thing. This is going to kick the bloom engine into overdrive. Going in: pH 6,22 PPM 485 Temp 22 °C Runoff: pH 6,7 PPM 650 7/17/25 Today Grapey got 4.8 liters of water, going in pH at 6.0, PPM 88, temperature 21.2 degrees Celsius. Runoff was pH 6.8 and PPM 760. Stompy got also 4.8 liters of water, pH going in at 6.0, PPM 106, temperature 21 degrees. Runoff came out pH 6.2 and PPM 2000. Goddamn 😅 but she seems okay with it. I think the next watering will also be just plain water because she has enough there. I will see.😍

Bueno, ya empiezan a tocar las fotos guapas jajajajaja Les metí el corte este domingo pasado a todas para dejarlas listas para el engorde. Vamos a ver que tal.