Expert Seeds fun( and guest !)
Day 21 flowering: Hi all , hopebm we are all in the green and feeling serene ?. This week has been a good week for both of these ladies. Mimosa Lemon is a genetic monster !!!. I stripped quite a lot of lower scrappy looking growth and so much leaf matter with it, I expected a smaller lady to emerge.... Instead shebhas responded so amazingly well. Her cola lengths coupled with the fast filling node gaps, show how big she intends to finish. She has so much growth to her frame that she fills the space for 2 plants already and the stretch has only just stopped. !!. A real monster in the making I think. It has been a breeze to work with so far and tookntonall the punishing training I have thrown her way. Glueberry has done so well to survive my serious oversight of not watering her enough. Even now she drinks so much that her pot dries again the next day. Wirhbsigns of being held back in size , she has tried to make up in bud number. I did a major strip out of all the inner growth and small budlets forming so she can focus her energy on rebuilding her many limbs to full vigour. Both plants doing good at this stage with no deficiencies showing so far lets see how much they fill out next update. be well Growmies.
Jealousy Marker Auto - Sponsored
Salokin
@Salokin
Follow
Week 4 | Jealousy Marker Decision made. After the comparison period, one plant clearly outperformed her two siblings in vigour, structure and overall development. The other two have been discarded, and the winner has now moved outside — straight into a 5L airpot, bottomless, set in the garden next to the 46 Kush. Ran short on the bigger pots this time around, so she's starting outdoors a size down from the others — being bottomless though, roots can push down into the native soil below as she grows, so the smaller pot footprint isn't a hard limit. **RootX** was applied again at this transplant, delivering mycorrhiza (*Glomus intraradices*), *Trichoderma harzianum*, 13 strains of *Bacillus spp.*, humic acids, amino acids and vitamins straight into the new root zone — giving her the same strong start outdoors that got her through the indoor selection phase. Last recorded indoors before the move: Week 4, height 15cm, light schedule at 17 hours, EC 1.5 mS/cm, pH 6.2. Now she's outside and adjusting to natural light and the elements. Updates every Sunday. Stay tuned.
Runtz Auto- Seedstockers
Girls are fattening up! The one is doing great, good frost development and size. While the other is showing signs of lockout or deficiencies, but is still growing strong. They are probably getting their last dose of nutrients next week, they are a 10-11 week strain and that’s fast approaching 🤤 RH was lowered to between 50-53% and temps have been steady around 77-79. They are coasting now, just gotta fill up the humidifier daily and watch them finish. Happy Gardening 👊🇨🇦❤️🌱
Strawberry Banana fast flowering photo
Ryno1990
@Ryno1990
Follow
The Strawberry Banana from canuk seeds is comming along great ending week 2 of flower she has been growing her buds pretty good so far an has been looking nice an healthy the hole time loving growing under her medic grow fold 6
Gorilla Girl
Island
@Island
Follow
Week 5 The soil started to stabilize, the plants are less stressed and the production is satisfactory. Apparently the worst is over, I have watered every 2 days on average. These strains are for approximately 9 weeks of flowering, soon HARVEST. In the half of week 5, it was add 205W of Citizen and Epstar COBs. TOTAL 565W.
 m8 #1 gea
Very high quality strain. No joke, I'm glad I have discovered such a fruity and sweet sativa strain. This m8 by gea seeds is a pleasure to smell, I'm so sad about growing her in that little 11l pot, hope next year I can make a very big bush full of fruity big colas 👨‍🌾🤤🍭🍓🍓🍏🍉🍉🍊 Loving the fragrance. Very recomended guys. Peace ✌️💚❤️💛
Erster Versuch (first try ever)
NSABND
@NSABND
Follow
Der Start in Woche 8 ist regnerisch und bewölkt bei kühlen Temperaturen und hoher Luftfeuchtigkeit 😳 The start of week 8 is rainy and cloudy with cool temperatures and high humidity 😳 Day 62 "Haircut" for "Hilde" 😏😉
"Torus"  #C9
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Tent-X Ultimate Grow Challenge / nonick123
nonick123
@nonick123
Follow
Dia 20 (05/02) Han pasado 8 días desde el ultimo riego. El sustrato de PRO-MIX HP se encuentra esponjoso al tacto a pesar de que está seca la parte superior Riego 1 Litro H20 + Wholly Base 1,25 ml/l + Solid Green 0,5 ml/l + Rise Up 1 ml/l de Gen1:11 - pH 6,23 TDS 660 PPMs Día 22 (07/02) Vamos a probar a hacer este ciclo con LST Día 23 (08/02) A +24 horas la planta ha reaccionado muy bien al LST. Se han estirado las ramas inferiores y la rama apical se sigue estirando Día 25 (10/02) Sigo con ajustes de LST para abrir la canopia. La planta está reaccionando con mucho vigor 😍💥 Este día añado a la carpa el sistema TrolMaster TCS-1 Tent-X Día 26 (11/02). Riego 1 Litro H20 + Wholly Base 1,5 ml/l + Solid Green 0,75 ml/l + Rise Up 1,25 ml/l de Gen1:11 TDS 780 PPMs - pH 6,36 (mínimo ajuste con pH+ para subirlo desde 6,2) La planta avanza vigorosa. En una semana pasamos a 12/12 😁 Nutrients by Gen1:11 - www.genoneeleven.com Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1
Pineapple(Skunk, Express)
Grnhead
@Grnhead
Follow
Update 2/4 (day 25): * Turned the lights back up to 100%. The top of the canopy is getting 50K Lux and they seem to be enjoying it. * Very small signs of flowering in the two smaller plants. Nothing yet from Pineapple Express #1, which was surprising since it's older. * Trimming bigger fan leaves to leave a clear top and bottom to the canopy. * Trying to train the colas to an even distribution and without getting too close to the sides. I am going all in on fewer-but-larger colas to try to boost the harvest. I hope I don't learn a hard lesson by not letting side branching to occur but want to give it a shot.
Papaia cookies auto
Iniziò seconda settimana di fioritura... Questa papaia cookie mi sta sorprendendo...bella davvero,sta iniziando a profumare bene e sopratutto buono😂😉💪💚💛
Fast & Furious
Elpicor
@Elpicor
Follow
D15 Today I come back home after 24 hours and found the living room foggy, I had to open the windows wide, the temperature in the growbox was 32 degrees and the humidity at 79%... -> ( temperature and umidity was set to all time range, so values is not of this season). -> I will follow your advice and only apply LST to keep them low THANKS GROWERS! D 17 I've feed all plants with 1 ml of Algamic/Activera and 0.5 ml of bio heaven. I do love stress training 😂 for orange sherbet which is the tallest one D 18 Orange Sherbet loves training, today LST also for Purple Lemonade and Strawberry Gorilla D 20 Future space problems are expected, I think I have to switch to the 1x1x2 MT growbox, spring is upon us I could always put a couple outside, we'll see what I feel like doing
LSD-25 auto
valiotoro
@valiotoro
Follow
Hello everyone week 5 of flower has passed for this LSD-25 auto 🎢 For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻
Trio Feminized
I grew Tangerine Dream under HLG Rspec 240W for the whole grow except the last 2 weeks. I am very impressed by the size and density of the colas. Tangerine Dream has the biggest colas out of the 3 strain grown. The final space occupied by tangerine dream 2ftx2ft. Downside is long flowering time and heavy colas that needs support. This strain responds well to mainlining, needs lots of space and uneven height main branches will result in uneven canopy. The colas are not homogeneous. The yield was very satisfying and turned out more that I expected. Thanks for the support everybody 🙏🏽👍🏽 Keep growing
Mars-Hydro FC3000, Grand Daddy Bruce
Week 6 begins with a 3 liter feeding and removal of a few dead leaves. Buds are developing nicely and frost is present, woo hoo!! Thanks for stopping by.
BEAST(!!!) Cookies Gelato - Outdoor
Rap_a_cap
@Rap_a_cap
Follow
Hello Gromigos, well, I've lost the count of days with hell hell temps, always around 95°F. Cookie is starting to stretch but internode length is incredibly short. This pheno is perfect for indoor growing in a large pot, a single but great plant. I've trained to low main bud obtaining an homogeneous canopy. Now branches are full formed and fat. Incredibly hybrid vigour. No need for fertilization, maybe 1-2 shoots later, in blooming. I'm watering them every other day with 2 gallons each, little by little, trying to avoid past's run mistakes.
Abusive OG - Photoperiod
Festerus
@Festerus
Follow
Lots of work this week on keeping up on training this week, buts it’s going well! I split a fork when tying her down but the duct tape fix worked great and she didn’t exhibit any stress from it surprisingly :) Each day I tighten the bindings and then defoliate about every other or 3rd day. I keep doing 2 feeds to 1 yucca flush. She now uses 3 gallons to get my saturation and 20% runoff, about every 3 days. When I yucca flush I also foliar feed her to keep things flowing, roughly 1/8-1/4 strength of my food dosage. Foliar feed mix is yucca, kelp, fulvic acid, 1-0-0 Calmag+, and a 14-0-0 ominA. And I fed that every day for 3 days until I watered her again :) Interestingly, 3 days in a row just barely began to give her N toxicity by causing a slight clawing of the mature fan leaves, but no burn in the tip, and day 4 she was flat out again :) so it was right at the edge of useable nutrients IMO. The netting is coming along nicely, lots of weaving going on, refilling the center and spreading the mains out to the corners of the tent. Tried 2 different cloning techniques, one placing them into the peat pellets from Walmart with rooting powder, and the other is a Tupperware container filled with a PH’d weak nutrient solution, and sticking the stalks through the lid into the water. Both techniques have produced roots, peat took longer but are stronger specimens. Tupperware seemed to shock them less but roots are tiny little nodules. Thanks for stopping by and checking things out :)