Very good

Fantastica settimana! Finalmente iniziano a formarsi i fiori e i primi peli! Per la prima volta ho aggiunto una seconda rete per aiutare lo scrog, sono molto soddisfatto, ho solamente dovuto lasciare un buco nella rete per far passare il vaporizzatore per tenere bassa la temperatura del box e di conseguenza dell'acqua nai vasi. Ho risolto il problema della muffa sulle radici grazie al trichoderma e alle micorizze, stanno tornando come nuove dopo un mesetto non proprio positivo sotto questo punto di vista, anzi, se peggiora a rischiavo di non arrivare alla fine del raccolto. Corso sono stato un pelino alto con l'ec, arrivando quasi a 2.8,l'ho abbassata rabboccando. Manca un mese, siamo nel momento clou 😍😍🤩🤩😝😝🍀🍀🍀🔝🔝🔝💪🏼💪🏼💪🏼

Week #11-July 27-Aug 2 8/2-The top colas are ready to be harvested. Lot of amber trichomes now and I'll cut those and then lower the lights to let the middle and lower buds get a bit more ripe.

11/07/25: We just entered the third week of flowering and the explosive growth definitely stopped in the past few days! Buds are forming nicely along every branch, stacked with those first white pistils! In the close-ups, you can see those tight clusters starting to take shape, soon the candy factory will be open for business! 🍬I gave them a light feed of Plagrom Green Sensation (1ml/L) to keep the flower sites happy, and they are clearly loving it. No signs of stress, just pure jungle energy. 🦍

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We're back from vacation!! These did great on autopilot, of the 6 plants, these 2 are definitely my favorite.. a simple 4way LST when all tops come in level makes me happy 😻. they're still a little too dark/overfed so we're going super light for a while.. We raised the Solux350 a few inches as well, they're stretching fast... all other plants were showing early signs of cal-mag def so we adjusted strengths for everyone.. We have the Solux350 at 75% power, we'll keep it here until their flowering stretch is over and finish out at 100%...I'm really curious to see if resin production using 2835pro/Osram combo is comparable to what 301b/Osram does.. We have another 300watt using these diodes and that tent is a frost factory lmao..not too much else to report, it was nice not returning home to dead plants lol..thanks as always for dropping by and happy harvests everyone!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Nothing major to report this week. Continuously LSTing the plant, hence no change in overall height. Seed for 2nd plant of perpetual grow popped. Just waiting for it to break soil now. Photos/video taken 42 days after breaking soil.

Woop happy with how the grow is coming along had fun trimming the girls down shitting myself at the same time though😝 still on an 18/6 schedule as I didn’t want to over stress the plants following defoliation and scrog . Scrog setting up wasn’t too bad hope I done it right 😅 the screen is slowly becoming very green haha .. I’ll keep looking around on the web to widen my knowledge but for now it seems all is good my plan is to switch to 12/12 starting week 6 and around this time I should look into adding bloom to feed the autos as I’m sure they’re in pre flower stage right now but if ever in doubt I shall ask Some cool photos to look at as well Happy growing ☠️

I start flunshing now after the last dose of organic additives wich boost sugar and protein storages in the buds to create new tissues and enhance flavour an odour.

Uiii ich habe es geschafft beide Grows vollständig hochzuladen auch wenn der erste lückenhaft und sehr früh ernten musste hat sich für diesen Grow schon rentiert.

All good so far, just sprayed them with anti-insect just in case (thats why the leaves looks shiny or oily) also noticed that the one i have in the right corner streched more the first week than the other 3 but that one is bigger since the beginning. Added 120g per plant of biobloom (3g per liter) and increased the light to 315w 😁

welcome to 📅 Day 8 of flower 7/12/2021 they are growing very well and are drinking lots 10 gal a week I'm hoping that they stop the stretch and start to fatted up as I am running out of space lol. next update on thurs till then happy growing and as always keep your stick on the ice 🏒 I would like to say a few words about Mars Hydro. the TS 1000 is a great light and I love the fact that the power supply is capable of being separated from the light and located outside of the tent to keep the heat down. I also like the fact that you can control the light intensity and daisy chain with another light witch is what I plan on doing.

The seeds were planted three days after the paper towel and the first one grew out of soil the same day.That seed was planted with its first leaves(cotyledons).

Wow these girls are looking great! Nice big naturally shaped canopies that are just bursting with buds. Speaking of which the buds are just beginning to swell up and produce trichomes this week, so they are for sure 1-2 weeks behind the other strains in the tent. But with the size the buds are already we could be looking at some chinky ladies in a few weeks. Have noticed that some areas of the root on the tray of the front plant are showing a bit of green. Looks like maybe algae, or something of the sorts. Will start mixing in some hydroclean to the res, helps flush roots and clean lines. Could just be to exposure to air as well, not that humidity between 53-55%. Back plant doesn't show any discolouration on the roots as far as I can tell, but it's pretty hard to get all the way back they so not 100% sure. Girls still getting 650-700 umol/s for 20 hours a day. Ran out of B52 and and the temp enhancer, so am supplementing with some nutrients I got in a bulk buy. Using Nutes Nutrients Microbooster. Seems to have many of the same benefits of B52 and Bud Candy, so far plants seem happy with it.

She’s a total beast! Gave her a little defol to remove some fan leaves blocking light to the lowers, also removed her from the block she was standing on as it wasn’t necessary anymore because she reached height. Now to see some flowers develop! 😊

Cookies N Cream Clone one from Zombie66 Clone two from ATMBKK

From the looks of my top of the coco it seems like I was over watering. I seem a bit of algae growth, my coco stay moist for 4-5 days it seem like. So should my nute feeding be huge or give them small daily feeding in between the large watering?

TGL HADOUKEN at 80%

Following RQS auto guide : https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 WEEK 2: LATE SEEDLING STAGE #8 22.3. - #14 28.3. #8 22.3. - Canna PH- grow (and bloom) arrived today, mixed 6ml to 3liters and poured around the pots (hoping to get hum. up also) will see what it does and if the PH starts going down from the 7+ i can start adding smaller amounts. -Moved around the LEDlights (those have 'bout 2000LUX at plant level) so they are more along the tent walls. -Moved temp meter from lamp to plant levet (have now confirmed the lamps wont heat up too much under current air flow so its safe to stop monitoring heat source temps. -Removed the "glass" from 3in1 meter and the tape from the front, tested the luxes, still at few hundred, so i would guess the LUX meter in that cheap meter is BS!. Now the PH is way more visible in the camera when there is no screen reflection etc. Added pics of the luxes from android app, will receive the "real"meter possbl this week. -When i had tent door open and did the stuff mentioned above the temp dropped to about 13degrees, but now we are already back up at 23'c at plant level, so seems stat the current exh-fan rotation is good. -Plants emself have taken some sort of an growth spur 'cause just few days ago they seemed like they are not growing at all, and ow i can really see the difference and they are making next set of leafes, might be that the temps risen so they enjoy em self now way more - forgot to take new pics from the plants emself so will juts update pics from cam for now , at least there's been some change again. -Will try to remember take proper pics of the plants next time i visit the tent physically -Should remember to buy the "LST-wire" for training, would be good time to buy some eastern decorations fluffy wires. #9 23.3. -Noticed that the timelapse camera is getting thrown around as well as one LEDpanel, so went and tied em up to tent posts. -Added 1,5liters of water that had 6ml of PH- canna in it, and poured in to "middle corner" of every pot. -Tent was way more warm and moist inside then ever before, which is a good thing, im sure after the latest added water im getting there. -Ordered a RAM humidifier. And some nutes pack from bio-grow. -Updated "week2 timelapse" (Check 1st week for its timelapse) -Note to self: Take those damn "camera quality" plant pictures, you are supposed to...- #10 24.3. -Started small form of LST -Guess who forgot to take the closeup pictures... again... Well better luck next time :D -Added 5liter RAM humidifier, at lowest possible setting, so that the water would last longest -Added 1,5liters of water with BioBizz nutes that came today in mail, Alg-A-Mic, Root-Juice and Top-Max. -Added ScrOG, but obviously its now just tested that it fits and its hanging at the tent side. -Had to move the Fast Eddy a bit and make a "stand" for the humidifier. -Moved the other LED (2300lux) a bit further up, will have more effect when plants grow, and those can be had as a xtra lights. -Moved some wires around their sockets to get better fit for all connectors. -Adjusted the camera directions -Turned both fans to level 1 of 2 -exhaust fan still at about 50% timer on/off, that must been what caused the "wobbly"pictures in timelapse as the tent gained more vacuum inside which must have drawn in the walls a bit. #11 25.3. -Not sure if i did anything #12 26.3. -Water run out from humidifier -Added a pic of the day -Luxmeter arrived, didn't had time to install it yet, but tested and found working. #13 27.3. -Added Hydrometer -Filled humidifier -Poured 1liter of water with nutes -Added/moved LST's -Finally remembered to take the close up pics of the plants! wohoo. -After following the hums i think i might add exhaust flow as its also warmer outside so the tent can now take it #14 28.3. -Last day of #2 week -Did nothing, just watched em grow. -Water run out of hum. hum went from 65% to 45%