The Grow Awards 2026 🏆
Likes
Comments
Share
@Afterglow
Follow
Ну вот и закончился наш короткий путь выращивания сатива-доминантного сорта. К сожалению, размер бокса не позволил полноценно включить лампу, так как растение сильно вытянулось и стало получать световые ожоги, плюс еще сыграл недостаток кальция. Изначально хотел 8 больших, толстых и симметричных колл, но пришлось гнуть дополнительно. На фотографии видно, что все ветки закручены по спирали - это пытался решить проблему сильно низкого освещения. Давно не растил сативный сорт и забыл, что в начале цветения растение ну очень сильно вытягивается. В итоге, из-за LST во время цветения, нижние этажи тоже вытянулись и вместо 8 колл получилось в 3 раза больше. Все-таки мне мой метод больше нравится, чем ML, так как времени уходить меньше, стресса меньше, а результат такой же. Снял 607 грамм больших веток и около 100 грам всякой мелочевки. Немножечко пересушил. Так бы вышло грамм 200 чистых шишек. Придется чуток их увлажнить. Вцелом очень доволен собой и результатом. Спасибо что заглянули и порадовались вместе со мной.
Likes
14
Share
@Kirsten
Follow
12.5.25: I watered with some more Trace again. She's feeding well and needs watering more often again. I upped the dose of Trace as I've noticed that there are some purple hues coming back on the stems. 13.5.25: I have removed all fabric ties on the plant. I think we have stopped stretching, so the sooner, the better. I keep getting my watering can caught in them all, and it was only a matter of time before I ended up snapping more branches off 😅 The fewer things in my way, the better 🤫 15.5.25: I watered today as the pot had dried out almost. The plant was watered with dechlorinated water PH'd to 6.5 with the following nutrients per 6.5 litres; ♡ 7ml Trace by Ecothrive ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients The plants received the amounts below. HULKBERRY: 1l FASTBUDS: 2l NORTHERN LIGHTS: 3.5l I am not giving any further nitrogen at this stage. They had a couple of doses in the past week or so. I'm sure they don't need any more. So, I'm just using the kelp as it's packed full of goodness and high in potassium. I also suspect an excess of phosphorus. So I'm also leaving that out for the time being. There are still some red stems on the plants. added the Ecothrive trace for the last few waterings. I'm hoping it will resolve without any further intervention. 16.5.25: I watered Hulkberry with 1.5ltrs of dechlorinated water PH'd to 6.4 with: ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients ♡ 7ml Trace by Ecothrive Measurements per 6.5ltrs. PPM: 670 PH: 6.4 17.5.25: I watered again today with 2ltrs of the above PH'D to 6.2. Parameters remaining the same. The plant is increasingly thirsty, so the waterings have again needed to be increased. As we're reaching deep into flowering, this is par for the course. I'm mostly using coco, perlite worm castings. Etc. So it's very easy for my pots to dry out. I need to keep on top of it. As the pots dry out, the microbes are lost, and so keeping everything moist and healthy is imperative. That's why I add Ecothrive Biosys regularly to ensure I keep up with the microbial life in the soil biology. To avoid PH lockout. 18.5.25: I watered again, with the same parameters as yesterday. Instead of Sea K, I used Ecothrive Biosys: 1/2 Tsp/6.5l PPM: 550 PH: 6.4 Thanks for checking out my diary and hanging out 💚✌️ 🍃 😊 🌱
Likes
99
Share
The competition is coming to an end and I did not have time to harvest, I want to wait another week, I will approximately get about 2 kg. I really liked this unforgettable experience of growing this variety)) There were no problems, except for a huge 3.5 meter growth)) The smell is on the whole area, I will soon enjoy sugar flowers))
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
8
Share
She beefing up a bit leaves 🍃 getting super dark olive
Likes
82
Share
Another fast update! 😃 Hey guys! I hope everything is going well for everyone. This is the 2nd week of flower and I'm here again to share what happened last week! My babies now get thirsty really easy, nothing like how it used to be (and you can actually see them stressing over it in my photos) but gladly nothing that some water can't fix. The main colas are also starting to grow more and they are full of small developing flowers (they look super pretty! 😍) Some side stems are also outgrowing the main branches... and I'm kinda unsure what I want to do (or if I should do anything). Maybe LST or supercrop them? (I might screw things up by doing it in flower and I have never done it before 😭) I don't know. I also want to trim some leaves away since the foliage is very dense but I fear I might end stressing them! I will probably make a grow question to know what others think. I'm back on a normal nutrient schedule. I'm no longer "overfeeding" them and I water them 4 times a week (but with little water). Next week I'll try doing 3 but with more water and see if they like it more that way. So far I love how the plants are developing! The small flowers look great and they look bigger everyday! 😃 Thanks everyone! See you all next week! 👋
Likes
24
Share
@Kirsten
Follow
14.1.25: I've been readjusting the LST. I just took all the pegs out and reshaped her. I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕 I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it! Also I'm running very low on Biobizz nutrients, so that could be bad 🤞 18.1.25: I have done another large defoliation on PPP1 and PPP2. Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted. I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant. I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too. This run I have 9 plants. The only thing I'm worried about is the salt build up. Have you used it before? Or any other natural way to increase PH? Please let me know! I've also added Biobizz Fish Mix to help with the extra Nitrogen needed. Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish. I water with this every 3 days. I did order some more Biobizz Bio-Grow and Bio Bloom. I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too. It is fairly expensive this time as the plants are hungrier this run. I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments. Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore. I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄 I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues. Cleaning the tent after watering every time isn't my idea of efficiency 😅 Thanks for checking out my diary 🍃 ✌️
Likes
2
Share
Week 10 to the day and it’s time for the chop. Won’t be a whole lot see in that regard. It’s all being hand trimmed, packaged and frozen fresh - right from the plant. Then processing via bubble bags, pressing for live rosin, decarbed and finally - carted. I’m guessing about a years worth of vapable concentrate.
Processing
Likes
3
Share
Likes
61
Share
@Natrona
Follow
Divine Seeds Auto Contest Candy Outside Grow 👉Sponsored Grow👈 W7F3 7/13-19 The weather was rainy with thunderstorms early in the week becoming hot, humid and overcast. I only got to fertilize once this week and thankfully with all the rain we’ve had she doesn’t show any deficiencies. I fertilized with I49 grow 1 tbsp/gal & 2 tbsp I49 Flower. With the extreme heat and rain, my auto Candy grew 11 inches and is now 39 inches tall. She had a some minor bug damage last week but no worries. She is standing next to a plant with powdery mildew and demonstrates resistance to fungal diseases. ( I did move her further away to be safe and Im spraying the other plant wth H2O2 solution. In the background noise on the video is Cicadas. When they hatch, they crawl onto a tree or plant and molt. The adult has wings. This is the empty body casing. This year there are some but not a lot as in many years of their 17-year cycle. As always, thank you all for stopping by, for the likes and most of all growers’ love and support. Stay green, growers love 💚🌿 💫Natrona💫
Likes
2
Share
@ChiTaN
Follow
Girls are healthy and juicy,getting ready for the light switching,changing pots and also some defo probably 💚🌱
Likes
8
Share
@Oldwied
Follow
Day 58 The colours of autum are so beautiful. 1 week left to haverst.
Likes
13
Share
@einamio
Follow
Day 36 I guess I can call it bloom. Nice strong pistils shooting all over. She is the tallest so far making me raise my lights a little more. Day 38 Now Californian Snow is the tallest :) Ztrawberry stopped at a perfect height, it looks like she's gonna develop into a beautiful lady. Fat white pistils all over 😻 Day 39 Happy girl got 2500ml cm bg bb bh 6.3ph ~1EC She is perfect, symmetrical, stopped stretching at about 50cm, flowers are mostly leveled, branches are strong, leaves point up unless I water. I think she's also turning purple. Beaut 😻 Day 42 I think I saw some burnt tips but she still looks super happy and healthy. The most vigorous plant I've had.
Likes
4
Share
@NSABND
Follow
Day 29 massive leave cutting in the morning... but the queens seems to be ok 😃🙏👌👍the Z-Up strain has 5cm more then the others Day 30 all queens are a little bit shocked from cutting 😩 ok chill today but tomorrow back to work bitches 😂😂😆😃🙏👍 Day 31 everything seems to be allright 😃🙏👌
Likes
6
Share
Hello guys. We have reached the fourth week😍😍 This week I have to top and lsd the plants. And our og creams have shown their female organs again and this means that the project is progressing successfully. I also uploaded the topping video for you😍 Thank you for commenting and following me. "farah4weed"
Likes
10
Share
@Fonzo412
Follow
For the germination process I ,First put the seeds in distilled water ph 6.5 for 24 hours . Let them float for the first 12 hours in a warm (dark) place . I used my grow tent temperature inside was 75 degrees and 50%humidity through out the entire process . After first 12 hours I poked the seed to the bottom of the cup and let them set for the finale 12 hours . After the full 24 hours was up . I placed the seed’s on a plate with paper towel first and second I added water to the paper towel (moist not wet) and placed a seeds on top with another moist paper towel and let go back in the tent for 2 more days After two days the tap roots appeared for each seed so I potted 2-3 into there finale medium . Didn’t have enough soil for all 3. Once potted. Plants 🌱 are given 18 hours of light 💡
Likes
12
Share
@Chubbs
Follow
420FASTBUDS ORT2108 WEEK 6 These two have been growing amazing since sprouted. Keeping very uniform between the two both being nice and bushy and stacking up great. Still feeding the same tds/ppm every 3 days the plants seem to be responding well. All in all Happy Growing
Likes
3
Share
@dwotTV
Follow
Chopped before vacation and off to dry while I'm in Ireland and the UK