After 12 weeks of flowering and an incredible fragrance, I cut off the larger top blooms. The smaller ones that were covered will be given another 1-2 weeks to ripen. Incredibly beautiful colors, pink-purple-green colored flowers The larger fan leaves were quickly cut off. The scissors were covered in purple resin. The wet flowers were carefully sorted into the drying net. Now they can be dried in the dark at 19°C and a humidity of 50-55%

I think I over did it on the numbers big

Zdarec, tak 6 týden za námi a Kingston punch vypadá celkem dobře, zatím bez potíží , ph se snažíme nechat plavat od 6.0 do 6.3 ,, Kingston punch je v pokojíčku s auto ultimate ( dutch passion) ale Kingston punch je šikanátor svou velikostí takže myslím že bere sílu světla do sebe víc než ten ultimate, mno a já to šikanuju 12/12 cyklem což sice svědčí Kingstonovi ale už ne Ultimatu .Já vím je to automat a mnozí z vás už by to likvidovaly ale nemám to srdce,,,,, je mi ho lito .tak ať roste growers

Que pasa familia, vamos con la sexta semana de floración de estas FBA2506 de FastBuds. De las 5 plantas, retiré una y me quede con 4 , preselección. La tierra que utilizamos que está en la publicación anterior es top crop all mix, Por supuesto el ph se mide en cada riego y se mantiene en 6.2, regando cada 48 horas e intentando mantener la humedad por debajo del 50%. Las flores ya están madurando rápido y cogieron las 4 un tono morado bastante curioso. Los aromas por el momento dulces con tonos afrutados, como a gominolas o chicles. Un ejemplar sigue un poco sobrefertilizado, es la única con la que me corte para alimentar. Yo creo que a partir de aquí dejo de abonar y ahora ya solo agua y limpiaremos raíces con flawless finish. Hasta aquí todo, Buenos humos 💨💨💨

Smooth sailing, but if there's no pest pressure, that's mostly the case for me at this stage. Early flower and finishing can be tricky, but mid flower is just watching the ladies get plump. I did spot the first signs of an imbalance, will not intervene in any way, as I want to see what the baseline of just stupidly sticking biotabs in the soil is. I cut my tap water with RO to an EC of 0,4 and we have almost no Mg in the tap water, no runoff either, probably there is an imbalance of the K:Ca:Mg ratio causing some problems. If i intervened, I would start pHing the water and adding some epsom salts. Like this I just hope that it will lead into a nice fade and not have too much impact on flavor.

🌸 Flowering – Week 7 | Day 48 (Day 83 overall) Strawberry AK – Current Status I did not post the last update in the forum because of the incident with the 3 days of continuous light on the Strawberry AK. In the end, the plant handled it much better than expected. There are no signs of hermaphroditism, no bananas, and in that regard everything remains clean. Stress is still visible on some of the leaves, but fortunately the flower development was not seriously compromised. 🌿 Overall Development At this point, it is becoming clear that the Strawberry AK needs more time than originally expected. The plant may be ready in around 1 to 2 weeks, depending on how much progress she makes during the final stage of flowering. 🧠 Current Approach For now, the plan is simply to keep everything stable and give the plant the time it needs to finish properly.

Temps and humidity are getting up there and harder to control. Equipment is working harder to keep cool. Heatwave forecasted for next week:( Got old lights switched out for new Mars TS series:) Ladies might need to be watered everyday soon as they are taking a lot more every other day. Don’t want them to dry out to much. Added some mulch to help with the top layer from drying right out between waterings. Want to keep the top alive and not die off as the sides of the pot also dry up and really only the centre stays healthy between waterings. That’s why I have now decided in future grows that I’ll being going with large pots, like 30-45 gallon and fewer plants, maybe 1-2 and grow longer for bigger roots!

💩Holy Crap Growmies , we are outdoors and in the Ground💩 👉It's been another full week and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍 She's in her preflower faze and shes leading the pack so cool 👈 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

This is my 1st time trying DWC. I started off with a cut from a plant I received from @cltvrs on Instagram. I dipped it in CloneX rooting gel, and put it in an EzClone machine. I used CloneX rooting nutrients at 4ml for the 2 gal reservoir. This was my first time propagating with this system, and I was impressed with the overall success rate.

3/4 👍 3/5🍓🦍Z🍓🍑CBD they are all responding well to the watering yesterday and I used great white soil inoculant that seems to make the biggest difference. The leaves are growing huge almost too big. I can see these are going to be much larger than the space, even though I only used 2 gallon pots. i’m going to have to top them all in order to fit them in one tent. They are just beautiful and healthy and perfect in every way except for the CBD because I dropped her when I was doing the transplant. 👍. 3/6 I mixed up 3 mL of silica into a gallon three separate times. I did a heavy watering of all the plants today.💦 3/7🍓🍑👍 3/9 🍓🍑💦💦💦 3/10🍑🍓👍

Final veg week

Dear diary, Week 10 total and week 1 of flower is behind us. Will just be making sure all tops are exposed and somewhat in the right place as I let them stretch for about 21 days before some defoliation. 🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸 ⏰ Day 67: Feeding was given in the evening with a solution of 1.87ms and pH of 5.6. During this feeding, I guided most of the tops into their designated positions within the net, ensuring they are adequately spread out to receive optimal light. I also checked the runoff, which measured 2.3ms, but considering the extra dissolved salts from full draining and collection that would be higher that it really is, I will aim to bring it back to the desired range of 1.65-1.7ms to be sure. ⏰ Day 68: In the evening, the plants were fed with a solution of 1.64ms at a pH of 5.8. ⏰ Day 69: Evening feeding consisted of a solution with 1.66ms strength and a pH of 5.9. I also took the opportunity to confirm that the lights were positioned at a 48cm distance from the canopy. Additionally, I'm testing the exhaust system by venting it outside the room. Currently, the relative humidity (RH) ranges from 53-55% during lights-off and 58-60% during lights-on, while the temperatures remain around 18°C with lights off and 23.5°C with lights on. These conditions fall within the desired vPD (vapor pressure deficit) range of 0.95-1.2. ⏰ Day 70: Feeding was carried out in the evening using a solution with a strength of 1.66ms and a pH of 5.9. To enhance air circulation, I added a fan at the top of the tent. Furthermore, I checked the light intensity, which measured around 760-780ppfd. ⏰ Day 71: During the evening feeding, the plants received a solution with a strength of 1.64ms and a pH of 6.4. The RH levels range from 55-65% as the girls get more bushy, while temperatures vary between 23-18°C, depending on whether the lights are on or off. ⏰ Day 72: Evening feeding included a solution with 1.64ms strength and a pH of 6.4. ⏰ Day 73: The plants were fed with a solution having a strength of 1.66ms and a pH of 6.0. As indicated by the feeding schedule, the A+B mix was increased to 3.5ml/l. I also ensured that the lights were positioned approximately 50cm above the canopy and set to 90% intensity to provide additional heat.

I give them max 2 weeks

Holy moly. She's growing... like a weed. She's loving the nutrient schedule and environment (finally). I was having an issue maintaining proper humidity levels and after exhausting EVERY possibility with venting, fans and otherwise, I have moved my dehumidifier inside the tent and it's working wonders. I drain the water with a shop-vac as I do the same for my run-off. Things are going great so far, I hope to continue this forward progress in the coming weeks. Going to LST sometime this week, just not sure when. 6/13: Started minor LST phase to open spots to light. Fan leaves are gonna be huge. I also overwatered her... I'm a noob. 6/14: No watering for 24 hours. I removed my LST. She wasn't yet strong enough for the arc I put into her. Another noob mistake and add the overwatering to this, I just wanted to destress her. 6/15: Back to regular 1 liter per 24 hours, also added Armor Si to the nute schedule. 6/16: She's showing signs of getting back to normal. Added Diamond Nectar on this day. I also LST'd her back to position. 6/18: Back to normal. I trimmed 1 fan leaf under the canopy that wasn't going to get any light. 6/19: She's better and growing well. I'm going to try and keep this vegetation stage a little longer. Added a little more water today, just a tiny bit. I have 2 other plants that are a week behind and I want them caught up for the flip as close as possible. Pray for me.

Another slow but steady week of growth

Tag 20: Heute musste ich die erste Pflanze aussortieren aus Platzgründen. Tag 24: Wieder eine Pflanze aus Platzgründen entfernt.

struggling keeping humidity down below 65%

Following RQS auto guide : https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 WEEK 2: LATE SEEDLING STAGE #8 22.3. - #14 28.3. #8 22.3. - Canna PH- grow (and bloom) arrived today, mixed 6ml to 3liters and poured around the pots (hoping to get hum. up also) will see what it does and if the PH starts going down from the 7+ i can start adding smaller amounts. -Moved around the LEDlights (those have 'bout 2000LUX at plant level) so they are more along the tent walls. -Moved temp meter from lamp to plant levet (have now confirmed the lamps wont heat up too much under current air flow so its safe to stop monitoring heat source temps. -Removed the "glass" from 3in1 meter and the tape from the front, tested the luxes, still at few hundred, so i would guess the LUX meter in that cheap meter is BS!. Now the PH is way more visible in the camera when there is no screen reflection etc. Added pics of the luxes from android app, will receive the "real"meter possbl this week. -When i had tent door open and did the stuff mentioned above the temp dropped to about 13degrees, but now we are already back up at 23'c at plant level, so seems stat the current exh-fan rotation is good. -Plants emself have taken some sort of an growth spur 'cause just few days ago they seemed like they are not growing at all, and ow i can really see the difference and they are making next set of leafes, might be that the temps risen so they enjoy em self now way more - forgot to take new pics from the plants emself so will juts update pics from cam for now , at least there's been some change again. -Will try to remember take proper pics of the plants next time i visit the tent physically -Should remember to buy the "LST-wire" for training, would be good time to buy some eastern decorations fluffy wires. #9 23.3. -Noticed that the timelapse camera is getting thrown around as well as one LEDpanel, so went and tied em up to tent posts. -Added 1,5liters of water that had 6ml of PH- canna in it, and poured in to "middle corner" of every pot. -Tent was way more warm and moist inside then ever before, which is a good thing, im sure after the latest added water im getting there. -Ordered a RAM humidifier. And some nutes pack from bio-grow. -Updated "week2 timelapse" (Check 1st week for its timelapse) -Note to self: Take those damn "camera quality" plant pictures, you are supposed to...- #10 24.3. -Started small form of LST -Guess who forgot to take the closeup pictures... again... Well better luck next time :D -Added 5liter RAM humidifier, at lowest possible setting, so that the water would last longest -Added 1,5liters of water with BioBizz nutes that came today in mail, Alg-A-Mic, Root-Juice and Top-Max. -Added ScrOG, but obviously its now just tested that it fits and its hanging at the tent side. -Had to move the Fast Eddy a bit and make a "stand" for the humidifier. -Moved the other LED (2300lux) a bit further up, will have more effect when plants grow, and those can be had as a xtra lights. -Moved some wires around their sockets to get better fit for all connectors. -Adjusted the camera directions -Turned both fans to level 1 of 2 -exhaust fan still at about 50% timer on/off, that must been what caused the "wobbly"pictures in timelapse as the tent gained more vacuum inside which must have drawn in the walls a bit. #11 25.3. -Not sure if i did anything #12 26.3. -Water run out from humidifier -Added a pic of the day -Luxmeter arrived, didn't had time to install it yet, but tested and found working. #13 27.3. -Added Hydrometer -Filled humidifier -Poured 1liter of water with nutes -Added/moved LST's -Finally remembered to take the close up pics of the plants! wohoo. -After following the hums i think i might add exhaust flow as its also warmer outside so the tent can now take it #14 28.3. -Last day of #2 week -Did nothing, just watched em grow. -Water run out of hum. hum went from 65% to 45%