The Grow Awards 2026 🏆
Likes
Comments
Share
@NONSENSE
Follow
Good afternoon everyone! One more week is gone of the flowering. the plant looks beautiful, the buds become heavier every day. I still only use Hesi sponsored nutrients with every watering. I don't overdose on nutrients and follow the weekchart I got from Hesi. genetics is good old school from Neville's seed bank. It is also a normal seed, not femenized. The light schedule is 12/12 , feeding every day( I try to handle the cocos always wet) next week is the last flowering, after that I will clean the plant and will harvest it. Good luck, everyone
Likes
17
Share
End of week 5, repoted this week, can't wait to see how they grow in these pots! I installed a heater and the temperatures are much better now. Only watering for now, was watering with just a little water before transplanting. The big pots I watered weekly with ~2L water and spraying the top layer every now and then to keep it moist. I gave a little more water today as they moisture probe was telling that it was still dry after 2L. So ended up watering each pot 4.5L of water with the plan of not watering for another 7 days. I think all this much is affecting how much water is flowing down (or my probe is broken :D ) We have an aloe vera plant which I am cutting leaves from and squeezing some gel out into the water. Hopefully they will get over whatever caused these drooping leaves quickly. They seem to be on the mend.
Processing
Likes
2
Share
**Encontrarás la traducción a español al final de la descripción** From/Desde: 09/09/19 || To/Hasta: 15/09/19 From day/Desde día: 08 || To day/Hasta día: 14 Blueberry Cookies Diary / Diario de las BlueBerry Cookies: https://growdiaries.com/diaries/38769-dinafem-039-s-blueberry-cookies-at-the-ocean -----IMAGES & VIDEOS----- V1 - Transplanting day. I'm using 10 l Aeropots as final recipient. I've used: - Small layer of ATAMI HydroRokz (perlite) at the bottom of the pot, just for cover bottom holes and to retain a bit of humidity - Over the perlite i placed 1l of mixture with BioBizz "All Mix" and Volcanic Soil - Again over, 1l of mixture with BioBizz "Light Mix" + Volcanic Soil & Guano - And filled the rest with BioBizz "Light Mix" + Volcanic Soil It's the second time that i broke half of the roots of a plant doing a transplant, It happened to me just for not being careful enough to hold the soil by the lower part. While this is no good, no further signs of that mistake other than the recorded video ;). V2 - Quick show up on how to correct the color of photos taken under red/ping/purple light. First I merge the HDR image from 3 bracketed shots, then I apply my custom color adjustment in the HDR resulting image. As i show in the video, to correct the red light, you have to enhance the blue and green curves, just play with a point in the curves until you find the best adjustment for each of both curves. Then you should go to tones, and play a bit with reds, pinks & purples... and.... Voilá, you can see the results, easy and effective..... but no more easy than using the right white spectrum. P1 - Cookies Showdown before transplant P7 - Volcanic soil and Guano -----WEEK SUMMARY----- This week was very easy, i didn't do anything to these babies apart from the transplant. This is the first time im mixing something with the soil, I hope not to overfeed the Cookies with the nutes, as i'm going to use the same nutrients i was using. The first 10 days they were growing in my 60x60x40 tent (DP60), with a terrible chinese light that i always use the first week wen I plant. PandaGrow 100W (50W draw) - http://www.pdgrow.com/index.php?m=Show&a=index&cid=12&id=53 So after transplanting when i place the plans under the Quantum Board or the Platinum LED, i've notice it on them immediately, they really don't like this kind of chinese lights. Thus after the transplant the plants has started to grow and wide much more and much quickly. -----WATERING CALENDAR----- 12/09/19 DAY 11 - 1,5 l after transplant with all week nutrients @ 0.8 EC & PH5.8 *****ESPAÑOL***** -----IMÁGENES & VÍDEOS----- V1 - Día de transplante. Transplantaré a AeroPots de 10 l. Para el transplante he usado: - Una capa pequeña de ATAMI HydroRokz (perlita) en el fondo de los tiestos, sólo para cubrir los agujeros y retener un pelín de humedad. - Encima de la perlita he puesto 1 l de mezcla de BioBizz "All-Mix" con tierra volcánica - De nuevo encima he puesto otro litro de mezcla de BioBizz "Light-Mix" con guano y tierra volcánica - El resto está relleno con una mezcla de BioBizz "Light-Mix" con tierra volcánica Es la segunda vez que se me parter unas raíces por la mitad en un transplante, eso me pasa por no ser lo suficientemente cuidadoso como para agarrar el sustrato por su parte baja. Esto no es algo bueno, pero he de admitir que aparte del mal rato de que se te partan las raíces, a la planta no le sucede nada de nada, sigue creciendo al mismo ritmo que su hermana. V2 - Un ejemplo rápido de como corregir la iluminación de una foto tomada bajo un espectro rosado o rojizo En el vídeo primero compilo el HDR compuesto de 3 fotografías horquilladas y una vez compilado le aplico mi ajuste de color. Como muestro en el vídeo, para corregir este tipo de luces hay que realzar las curvas de color azul y verde, simplemente con un punto por encima de la mitad de la línea media hasta encontrar los puntos más adecuados para tu luz. una vez encontrados, sólo hay que ir a los tonos y ajustar un poquito el rojo, rosa y morado. P1 - Muestra de las Cookies antes del transplante P7 - Tierra volcánica y Guano -----SUMARIO SEMANAL----- Esta semana ha sido muy sencilla, no les he hecho absolutamente nada a las pequeñas a parte del transplante. Esta es la primera vez que mezclo algo con el sustrato y espero no sobrealimentar las cookies ya que voy a seguir usando los mismos nutrientes que he usado con anterioridad y de la misma manera. Los primeros 10 días han crecido en mi tienda de 60x60x40 (DP60), con una luz china terrible: PandaGrow 100W (50W draw) - http://www.pdgrow.com/index.php?m=Show&a=index&cid=12&id=53 Siempre uso esa luz los primeros días de cada cultivo, por lo que al cambiarlas a la Quantum o al Platinum LED lo noto al toque, realmente no les gusta nada la luz china esa, inmediatamente se ponen a crecer y ensanchar mucho mas. -----CALENDARIO DE RIEGO----- 12/09/19 DÍA 11 - 1,5 l después del transplante con todos los nutrientes semanales @ 0.8 EC & PH5.8
Likes
10
Share
Hello guys I did a genetic cross project and now I'm testing the results of the project and sharing them with you👽 Second week of flowering😍 Almost all the seeds have proven to be feminized😍🌷 Thank you for making me happy with your kind comments. "farah4weed"
Likes
30
Share
Hello Diary. It completed the last week of flowering, a total of three weeks of vegetation and seven weeks of flowering. A total of 81 days since it sprouted. In the end, I can say that Watermelon lasted well, although I had problems, I mean over-feeding at one point, the flowers look good, they are beautiful purple color, full of trichomes and intense scent. The photos show that most of the leaves have totally turned yellow and a lot of them have brown spots on them, but the flowers have been spared. Although not as hard and full as the flowers of his roommate, Purple Punch. There were only two waterings this week, I wanted him to consume all the water to make the drying faster. The condition in the growbox is satisfactory, the temperature is around 25 degrees while the humidity is below 40%. Here’s what the last week looked like. 31/04/2021 - Day 64. Watering. I regulated p.H. at 6.3 and with 7 liters of water I evenly watered all three plants on the “farm”. Temp / Humidity on the farm - 25 degrees and 37% humidity. 03/04/2021 - Day 67. Watering. The procedure is the same as three days ago. Temp / Humidity on the farm - 25.3 degrees and 38% humidity. 07/04/2021 - Day 71. Harvest. After I did the photography, I cut the plant at the bottom of the stalk and hung it upside down in a growbox to dry. The temperature in the Box is about 25 degrees and the humidity is slightly lower than 40%. I turned off the lights and left only the ventilation on while I also turned off the fans. Now it is preceded by about two weeks of drying, maybe a little less, so I call with one last review. See you soon.
Processing
Likes
6
Share
She Is a beautiful babyyy. Growing so fast, and She love lst and topping. I think, She will give me some beautiful flowers 😍
Likes
33
Share
Día 88 y penúltimo antes del corte. Ya se aplicó Flawless Finish para un acabado impecable como su nombre lo indica. Siempre prefiero hacer el lavado de raiz solo aplicando agua en las últimas 2 semanas, pero esta vez lo hice aplicando el finalizador y luego los últimos riegos con agua purificada. La verdad es que estoy contento con los resultados de esta nena, que es hermosa por cierto, desprende olores ácidos, cítricos, dulces. Los colores son hermosos y las flores están rebosantes de tricomas, lo que la vuelve muy vistosa. Es todo por ahora, estaré manteniendoles informados en estos últimos días. Buenos humos! 👽
Likes
6
Share
@XanHalen
Follow
Feb 8 Today marks the 13th week of these girls, it’s been an amazing 1st grow, would highly recommend this strain for first time growers, even the one that had some issues ended up surprising me late flower with new growth, and somehow basically caught up with the strong girl in size, but not density. I learned a lot about how these plants like to be treated, and I will definitely implement new methods to improve my cultivation! See you on harvest day!
Processing
Likes
6
Share
@Flydope21
Follow
Progress is there. One of them is not doing so well but is starting to show a little bit of life. We’ll see where she is by the end of the week.
Likes
18
Share
Beginning of 6th week of flowering F36 SD2 smells like a burning tire next to an engine oil spill. The smell is aggressive and gets into your nose. SD3 smells like sweet engine grease with a warmth.The smell is inviting.
Likes
8
Share
Esta variedad se recuperar muy rápido de todas las técnicas de cultivas, empiezo a aplicar super cropping a las plantas que crecen demasiado rápido, al final de la semana añado una maya scrog al armario
Processing
Likes
3
Share
@mr_smooke
Follow
I'm a little late with update, I was very busy. In grow room it is all under control. the buds are filling up. Strech has stoped. She is 16 days in flower. Smeel is pretty strong, i just need to set up carbon filter. Next update will be in a fev days. ✌️🤘💚💜
Likes
5
Share
These cali genetics are blowing my mind 🤯 super sticky, very frosty rock dence buds with extra strong smells. All 3 strains are 10 out of 10, very impressed. Done last defoliation few days ago, preparing for the harvest so it's much easier. Stalks are super fat, same as buds. Got big surprise from Atami, plant food, and many extras. Crazy. Thanks a lot guys. 💚 Start adding you Bloombastic food already. They love it. Smell is mad. I think most of plants ready in week or so.
Likes
22
Share
7/30/23 - Day 48 - OK, so last I posted, I have been waiting to see how tall she grows. She does not seem to be stopping her growth I'm going to try some super cropping. I've never done this before, but it honestly does not seem like a bad thing. Hurt the plant a little, and the response should be more THC. The reason for hurting the plant is so that you can bend the plant as you need it. She's sleeping now, but when she wakes up, ill take a look and possibly start to super crop. Currently, I am working on implementing the auto water feature of the LEAF Grow system, which is quite convenient to set up. All it requires is to hook it up to a standard hose outlet, saving you time and effort. By using Reverse Osmosis (RO) water instead of tap water, I can ensure a controlled and optimal environment for my plants. Tap water contains various additives like copper, zinc, and chlorine, which can't be measured precisely and might affect plant growth. In a successful grow operation, every aspect needs careful control, and water is of utmost importance. RO water, with its near-zero ppm, ensures that there are no unwanted additives, offering the best conditions for plant development. Although RO water is not produced under pressure, I've found a suitable solution to address this concern. To achieve the required pressure for the LEAF unit, which is rated for 30 - 80 PSI, I've researched and discovered that a sump pump would work perfectly in this setup. This pump adds the necessary 30 PSI to the water line as it is drawn from the inlet, eliminating the need to pressurize a bottle or container, thus avoiding potential hazards associated with excessive pressure. I'll be documenting my progress with pictures as I set up this system, and I can't wait to witness the auto water feature in action, saving me from the hassle of manually adding water. Super Crop: I did about half of the plant in a Super Crop today. Meaning I damaged the branches enough to bend them. The plant will work overtime to fix them, but also, the Resin and THC will be surging through the plant in a rush to be more defensive against what it more than likely a predator eating it. I did my best to make the branches pliable. I think I did a good job. I was so scared that I was going to snap them.... and I did; on a couple, they split up the side. So I grabbed my duct tape and added a bandaid. I have been worried sick about how she would handle all the destruction. After about 3 hrs, I saw that all the Super Cropped branches were already reaching back up. This is a great sign that the plant is doing well and that all the branches I was sure were to fall off are thriving. Again I think this box is magic. The topping didn't stunt any growth, trimming a 3-gallon bucket full of leaves 1st week into flower didn't stunt any growth, and Super Cropping 2 weeks into flowering seems to be thriving. I'm going to get to experiment with this LEAF box on all kinds of strains. The possibilities are endless. Just one theory I want to try, Purple. I want to grow a strain known for its purple, and I want to grow it a few times, each time growing it colder and colder to document and show how cold might affect the purple color like we have all read and heard about. These are the kinds of things that I think about and why I choose LEAF. Ill be back to update tomorrow morning. 8/1/23 - Day 50 - I updated some of the pictures. Flowering is going well. Every day the water is less, and the buds are bigger! I scoped out some of the buds already. Now we just wait. i have a water change coming up in a few days. As always ill add some more pics as we go along. If you are looking for this experience, check out https://www.getleaf.co/
Likes
299
Share
@Roberts
Follow
It is harvest day on my green crack by seedsman. She is a monster auto. Thanks again for the likes, follows, and subscriptions on my YouTube channel. I appreciate the support.😀🌱🌱🌱
Likes
51
Share
Jan 15th - soil tests tonight / photos tonight 17th - soil ph is a tad over; 7.2 -7.3 - dinner served at a pH of 6.2 - dinner tonight; 1.5L pH’d water ran through plant first, then fed 3L nutes/water posted above. This flow caused some Run-off, but not enough to properly measure EC value -near max on the tds, but it was the thickest dinner yet. (including molasses) follow-up tonight. 20th - Allowing the soil to dry an xtra day - brewing a compost tea for tomorrow’s dinner. (black willie as well) Then back on schedule - Running 2 Aerated-Teas, staggered between heavy nutrient meals, I hope it nourishes the soil enough that we see a flourish of activity next week… - first tea with bat guano… Resting the banana lol Jan 21, - last day of the week… finally the tent to themselves. Congo & Mystic are gone - tea tonight
Likes
17
Share
2/7: Did a thorough feeding today, and also foliar fed with Microlife Maximum Blooms. Added humic acid. 2/12: Fed today..no time for anything else..
Processing
Likes
5
Share
@EKWCR
Follow
After 1 week of flush the plant start to fade gently, i hope that gonna be good before harvest. I think my additives tend to keep my plant green, both contain seaweed extract and are slow release. There is a little bit of nice fox tailing.