HydroTrolly
End of week 12, looking good. Stay tuned. So far so good. Water lines getting clogged a little with roots but I put together a little work arround using the water level indicaters I built into the system. (see picture) They are kind of on auto pilot. At this point in the grow I have learned how this particular batch likes things. For example 1.63 is the optimum EC currently. By monitoring how much the EC increases/decreases vs water level I can tell if they can handle the food level, and adjust accordingly, before they burn. I keep them right at the border of too much nutes. If you look you can see all the tips are just barely burnt. I ride the line. I'll update again on Sunday with some fun stuff.
First Grow
Arcadios
@Arcadios
Follow
Things are moving right along! We're definitely into flower now. All three plants are flowering strong and the Amnesia is starting to spread out. The other two are going to be very dense plants. I think perhaps I should have started LST a bit sooner on the Quarter Pounder. It's so dense I can't really separate it. They are taking a lot of water. I feel like I could be doing 1.5 gallons each and it barely goes to run off. Is that a good thing? * Watering a bit over 1 gallon each every 2 days * Top fed 1.5 tbs each 3 gal pot with Dr Earth Life. This is under the recommended amount but last time I got nute burn. * Top dressed with additional FFOF
Bubble Kush
Thank you to everyone who has been following, commenting and liking each week, it keeps the motivation to create the best diaries I can for everyone to enjoy or learn anything they can from. This was another fun run, with stunning colours to finish. She was dried for 7 days before being dry trimmed and jarred for curing. Because I have 4 seperate plants/strains in one tent, under one light, I've had to calculate these by dividing the conditions by 4 (4 plants in total sharing same conditions). This is the fairest and only way to work it out properly. Thanks for following and happy growing! 🐺
Experiment 408 & 405
UDUDUDUDU
@UDUDUDUDU
Follow
Experimenting witt a water ? log. Sit it in alluminium foil, add sugar+elderberry syrup & let it do itz thing. Stem waz split at da point of entry hopefully she'll extend fibers from their. Oxygen ? hhhhmmm Will add mineral rox for enmulsifier oxygen to h20
Pawloski’s Vault
We are in Flush !! Was giving them GH Flora series + rapid start + cal mag
Runtz Automatic Barneys Farm
Hempcules
@Hempcules
Follow
WEEK 5 (DAY29-35) The Runtz are thriving so far. Both plants have developed eight evenly spaced shoots, and now I’m waiting for the flowering to begin. Additionally, I have trained both plants with hooks to create a beautiful canopy. I’m still excited and hope they continue to grow as well as they have so far.
Jelly donutZzz fem
zenderman
@zenderman
Follow
14/7/26 day 43 of flowering,beginning week 7. second video-20 days old clone,roots forming in process,was taken bud(21 days flowering). 🌱 The clone was cut and planted directly into the soil, previously watered with Terra Vega and under a transparent dome with 18 hours of light.this method means manyfolding from one bud and ideally for scrog/LST technique.
First Indoor Grow: Autos
I’ll updats my comment tomorrow Height Chart: Girls Scout Cookies: 31 inches (3gal) Stardawg: 35 inches Girls Scout Cookies: 40 1/4 inches (5gal) Gorilla Glue: 33 1/4 inches Lemon OG: 41 1/2 Inches
Landrace West African Sativa (Togo)
Scribs
@Scribs
Follow
CLAWING / WILTING LIGHT STRESS / OVERWATERING CLONES ARE LIVING THE LIFE MOTHER - DAY 92-98: • Problem: leaves point upward, curl downward - could be light stress / nitrogen or magnesium deficiency / soil pH • Solution: Switched to 450W LED, then 300W running at 25% power to reduce light stress, potentially causing clawing • Solution: Regular CaMg+ feedings in watering and foliar sprays • New LED, while less intense, generated way more heat: temp went up, RH went down • Soil dried out much faster; light watering on D92/93/94/96 -> overwatering, damnit • Growth upward picked back up on D97 • Hot temperatures probably freaked me out a bit and made me overwater, hence wilting, will wait / monitor pot weight D99: Clawing started disappearing. Seems like the 300W running at less than 25% intensity is much more gentle on the leaves. D99: Leaves feel like paper/dry / wilt -> overwatering symptom CLONES - D41-47: • A28 is vegging and growing much faster, bigger and stronger than her mother - will sample clones from her soon • A29 is in pre-flowering
Humbolt run
Gorilla Cookies Auto
CalGonJim
@CalGonJim
Follow
12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage
Runtz Mintz Cream by SnowShoe Joe
Chucky324
@Chucky324
Follow
Hello. This is the end of week 12 and the beginning of week 13 of veg.. It's mostly going good here. I'm still a little concerned about Plant #6. It's still a little lighter green that the others. I tested the rain water I've been using and it's ph is 6.8 so I don't think that's the problem. The rest of the plants look good. I'll test the soil ph next. I'll get a kit at the store to see how the soil tests. Might have to flush the plant #6.... We'll see... Still getting down to 8*c at night. Got to have the heat on over night. and the heat sink helps. That's the 40 gallons of water I have in 8 - 5 gallon jugs under the table. It hold the day heat and releases in at night. You can see the white jugs in the pics between the table. I meant to get the top net on last week but I worked on my vegie garden instead. Man those vegie seeds aren't cheap either. OK. Take Care. Chuck.
Gorila girl x charly-grower
mi gorila girl esta hermosa! Brilla con sus cristales en sus flores🏵️ Estoy muy feliz por lo que estoy logrando hasta ahora. De seguro será una delicia cerebral 😆👏ya la quiero probar regada con mucho amor y la linea de top crop!!! Charly grower 👨‍🌾
shorts_status_processing
AK47 AUTO
Stress Killer Auto RQS Organic - RQS Cup
EXZELENS
@EXZELENS
Follow
D71: She seems to have grown a bit in the last day and the pistils are for sure looking more orange than white. Now I´ll keep an eye on the thricomes, still clear yet with little cloudy, using the microscope. This one, unlike her unfortunate sister, I intend to let develop to full maturity. No watering yet as she still has some. D72: Everyday I´m checking for rot, and it wasn´t today. D73: Watered 2L with 1,5ml of cal-mag trying to resolve a possible iron deficiency. D74: The pistils are all orange already but the thrics are yet mostly cloudy. She seems very close to harvest tho. D75: Found a little set of leaves from a larf that were starting to want to rot and blocking airflow so I just cut them off. Humidity is high ( and I´m having trouble and no budget to control it ) and her thricomes aren´t developing in the pace the pistils are starting to turn orange. Otherwise, the buds are incredibly beautiful, with nice purple colors on the sugar leaves and some calyxes and a big big amount of thricomes everywhere! D76: Well, today when I arrived at home and went to see the tent I noticed mold on her. The thricomes were about 20-25% clear unfortunately but I had to chop her, I can´t control the high humidity at the lights off period and it would only get worse and I would lose much more buds. The overall size was ok, very big buds – which I lost at least 25% of them -, mostly medium buds, both very beautiful and dense, and a huuuge amount of larfs that were hidden in the middle, but I can´t blame that on anyone else except myself. The smell is incredible tho, looking forward to smoke her. In the next weeks I´ll be updating with the harvest week and strain review. Thank you for reading, stay safe and peace ✌️
French Macaron & Strawberry Glue
Nice purple colour, Easy to grow, compact buds, cold resistant. But second pheno made a lot of seeds 😓 I dont recommend ThSeeds because the quality isnt that good and I feel like I wasted money and time with that strain. The smell isnt that insane
3 top notch strains
F4m0u5
@F4m0u5
Follow
Harvest some of wifi last week. Its now in jars and looks amazing! Cant wait for the smell when cured!! Got 80 grams already!( started 70% humidity in jars and go for 62% over 3 weeks) Just finished cuting down some of the cookies right before uploading this, those are some super heavy dense nugs. *Update*95 grams dry weight so far Purple punch finally has a few blotchs of purple and will be coming down tomorow night just ran out of time today, that plant is just toppling all over and cant hold evrything up!
Lets laugh with Laughing Buddha.
These two did great even through a lil stress they still came out on top. I almost want to run it back but I think it's time for something fruity maybe, maybe having a terpene profile that helps initiate a more stone heavy affect and be indica heavy.
Skunk apple runtz (Obama runtz x ricky bobby)
Ninjabuds
@Ninjabuds
Follow
I made this cross on my last grow I hope it turns out how I hope very weak seeds I wander if that has something todo with not drying them very