WEEK 1: The plants are now in the first week of the growth phase and appear vital. Plant #3 has a somewhat strange leaf shape that is also slightly curled. I hope that this will even out over the course of the growth phase. At the same time, 7 days ago I prepared the soil for the next pot size with FLO (Living Soil Fertilizer) in a separate container. You can clearly see that the earth is increasingly covered in mycelium. In addition, the earth already smells pleasantly of forest floor. - Light Power: 40% - Soil: BioBizz Light Mix - Additives: Dynomyco mycorrhiza granules

Weather has been quite dull this week but this girl is pushing strong into flower fed twice this week with 3ml bio bloom 3ml topmax and 5ml algamic per litre and was happy until weekend arrived now showing small signs of nute burn on tips of some fans will most likely feed for one last week and flush with water till finish! Am still so impressed with these genetics this plant has truely been through hell snapped at 4 weeks and accidentally topped during preflower and Is still producing nicely very proud Of progress and looking forward to the end results! Truely awesome to see what can be done in the back garden ;)

Well as the strain that was completely making my grow room stink I'm glad she is down finally . Anyone looking for some stinky buds and a girl who can give you nice compact buds and a good amount look no further .I'm going to run these girls again sometime soon as they were just so dam good at taking what ever I threw at them ..They had no nutrient burn or lockout issues , they lived high humidity and never showed stress . They could go with out water for an extended time and recover no problem . The team that did these girls really made a winner here I would recommend this one to anyone out there looking for easy to grow plants with a good return .. cheers canna family check me out on instagram @cannibal19888

Day 85: still flushing her and it starting to show on the leaves. I don’t want them to disappear because I’m going to make hash but I’m still waiting for a plant in the same tent. Have no space for drying so need to cut them all at the same time :/ Day 86: Will cut on Friday! Day 87: switched the lights off until tomorrow. This it the light I’m using for this grow! Mars hydro SP3000 High PPFD at 2.8 umol/j, average yield at 2.5g/w, increasing your yield 50% or more compared with old blurple and HPS lights, 300 watts output. Dimmer knob added, more convenient to adjust the brightness. Up to 30 lights can be daisy-chained and control together on just one light, or just have one lamp in 120x60 tent is perfect for light. https://www.instagram.com/marshydro_aliexpress2/

Ok this is my Full guide with pictures on how to setup a Deep Water Culture grow, items you will need for this grow - Firstly a TENT or ROOM i use a tent REMEMBER stuff you buy NUTRIENTS off eBay and Amazon could be decanted (watered down) , or cheap chinese fakes (Ph Meters, PPM meters) you should really buy these things from you local hydroponics store,as they are guaranteed , i ve dropped a few into the bucket and they are fked,its been a sunday night with a bank holiday monday and i m fked, 1) Ph Down - makes the ph of water LOWER - this is VERY STRONG SHIT , wear gloves and googles if you are messing with it, i drop a bit into my main reservoir Ph 6.9 ( maybe 10ml per 200L) 2) Ph up - makes the Ph go higher - also STRONG SHIT -only needed in Emergencies 3) Ph meter 4) PPM Meter or EC meter 5) 20L Bucket + moulded lid netpot 6) Air Pump ,air hose 3m ,air stone x2, 7) Pebbles to fill to top of netpot, 8) ROOT IT cubes , i use these and ONLY these, by that brand,i know why,and so im telling you, 9) Seeds - I prefer Fast_Buds ,autos ready in 10 weeks of 18/6 - top quality 10) Nutrients, I use Canna as they are the easiest, they have a way of filling the one side , if you take the top off you can squeeze into the measuring side - I would also recommend Advanced Nutrients,but they are more expensive - so you will need 1L Canna Aqua Vega A+B ( it comes as two parts that you cannot mix together , when you put this into the water you MUST stir it well before putting each one in seperately otherwise you will get salts formed and crystals floating around,10 ml per 10L week 1-2 ,15ml per 10L week 3, 20ml per 10L in week 4) 1L Canna Aqua Flores A+B (as above) 25ml per 10L week 5, 30ml per 10L week 6 ,30 ml per 10L week 7 , 25ml per 10L week 8,15ml per 10L week 9, 0 per 10L week 10 250 ml Canna Rhizotonic (roots love this use this from start 20 ml per 10L and cut down after 4 weeks to 5ml per 10L up until week 9 250 ml Canna Cannazym ( breaks down dead roots, enzyme of some sort) 15ml per 10L from week 3 through to week 9 250 ml CannaBoost - (quite expensive but worth it, DWC will show you why) 15ml per 10L week 3 to 4 , 25ml per 10L week 5-9 250 ml Canna PK 13/14 (bud booster) this is optional because you only add it once,personally i add 15 ml per 10L in week 7 so its stays in for 10 days I leave my water for at least 24 hrs before using it, in a big old olive container i bought , i think its 225 L i might be wrong, but it was cheap , solid and had a top :) I check my water levels ,my PH and PPM daily 11) Jubilee clips x3 - to secure the fan ,filter and outlet.( 5 clips if using air cooled hood ) 12) Fans - i have 2 little fans and 1 big one = think about it, outside there is always good air flow - 13) Extractor fan -mine is 6 inch 14) Carbon Filter - mine is 6 inch im not overly impressed with any brand. 15) Ducting- 5m of 6 inch easy enough,well for me... 16) Ballast - LUMATEK -i found this one amazing and switchable. 17) Lightbulb -600w HPS ALL THE WAY but i would use 1000w HPS if i could keep the heat down, they both fit in same fitting 18) Air hood - i have a MAGNUM superXXXL it has screw in holders for glass , they are quite tight 19) Timer for lights , must be good quality , I do 17 hrs on 7 off as it's more natural 20) Syringes for measuring accurately 21) Bucket to mix solutions THE GOLDEN RULE - you can always put in but never take out - never put in too much or undiluted into the reservoir unless you really know what you are doing, less is better than too much . Ppm v EC - you may well buy an EC meter instead of ppm meter there is an easy way to convert between the two ~ 1.0 ec = 500 ppm EC multiply by 1000 then divide by 2 to get ppm This diary will start shortly but as so many people ask me how to setup HERE YOU GO :)

FBTF was amazing. I tested topping with this plant, and while I do think that topping and root issues were the reason this plant did not grow so big. However, I did harvest dense colas that were all even in size and equally dense with loads of orange hairs everywhere, I am definitely growing again next grow.

Así termina nuestra preciosa Kerosene Krash, llena de flores pesadas y resinosas que doblan sus ramas laterales del peso. Ahora toca cosechar sus increíbles flores para proceder al secado y curado. Espero que os guste,un saludo!

As you can see the buds are super sticky make sure to have enough gloves 🧤 Harvest in 2 times the top buds then 7-10 days later the lower buds✂️ No popcorn 🍿 The smell is divine sweet candy with a touch of cardamom 🍭🍬 See you in 2025 for the smoke review Take care 😎

Day 4 of week 2 in veg 🎉🎉 She looking good and happy 😎✌️🌱🌱 Chanced hear pot with a 4 liter... Still so happy cant wait to se hear scrogging 🤣😎✌️ Hope yall enjoy have a good one growmies ❤️🌼

She’s off to a start. No additional water had been given since the seed was sowed 6 days ago. Day #7 will arrive Sunday 6/12 Cheers 🍻 everyone, let’s get growing 🍃

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen

Hello grow 🌎! Finally seeing signs of flowering beginning. (Branches alternating, calxes, pistils, etc.) I cut the girls' dose of gro pro which is full of N, way down amd introduced monster bloom and a small dose of nirvana. Was going to tie down branches but realized that it would make draining their buckets near impossible. So I decided to use bamboo sticks to "position" branches in spots of light and out of tge way of others.

The blackberry moonrocks have really started to root well I can see lots of thick roots at the booth the pot. These to plants are ready for flower they just have ti wait for the rest the tent to catch up. They are starting to develope a smell. This past week, the plants went from being weak little plants that had just been top and now they are on there way to being nice and sturdy. I could flip them to flower now if I wanted. I plan on letting them grow a few more nodes on each branch before I give them the flip. My hopes is I get longer colas if I let it ride out longer in veg cutting off all the lower growth b4 flower. I have had the light on 25% still but today I raised it up to 3o% I like to have them handling 40% nicely before I turn them to flower

In future I must take not that lamb’s Breath can thrive in cold conditions, but I am going to witness if the growth will accelerate or just level out with the coming of spring. Week 6 starts with a mild weather but in a couple of days a cold front makes land fall in Jozi and the last brought snow, but my babies survived and look at the love of my life, showing aggression when it comes to growth… I wonder if the transplant and the extreme cold will hinder growth, nature does miracles in front of us on a daily. She’s loving the compost mix, hopefully she will love her new home, if my calculations are right, all I have to do is only add nutrient only when I defoliate. The amount of nutrients in this medium is boardline toxic.

Harvested week 12. Solid root mass. She yielded about 5-10g which I quick dried and smoked as I had nothing in at the time.

Overall a great plant to grow. Some hardships through the beginning with the not so great nutes. Definitely worth a grow. The only thing is the length that this plant took was just absolutely crazy! For an autoflower I was expecting harvest 2-3 weeks ago. From seed to harvest it took 110 days.

Welcome back to another week, finally decided to flip to flower as these girls do grow pretty quickly in DWC. Aiming for some nice quality buds bit also a decent yield of at least 1 gram per watt of light. Nutrient solution has not been changing to complete flower schedule yet but I will be sure to switch it over in a few days. The crucial part now is keeping the EC and pH in a good range to avoid any deficiencies or Nutrient lock out. Let's see what the stretch brings the first few weeks. Stay tuned, and I'll be back for the by the end of the week to report some video feedback. End of the week has ending with a heavy defoliation session. Plants were getting bushy and covering potential tops so that needed to be addressed. For now, it will be selective defoliation once they have recovered, which should be in 2/3 days. Let's watch them bounce back. Stay tuned for week 2. Check out my YouTube and Instagram channel for a closer look. (Link on profile)

9/10: New week- these young ladies seem like a pair of identical twins I'll prolly transplant both of them in the next few days. 9/11: I waited to long to transplant them and they have root problems to some degree or another...too wet for too long. I transplanted both of them into 3 gallon pots and observed about 50% brownish roots.. 😕 I powdered the planting holes with myco, tricho, and other goodness. 9/12: Between the root problems and the transplant, they looked horrible, so I sprayed them with BoomBoom Spray today and will do a good root drench tomorrow with BushDoctor Boomerang. They looked better by the end of day, but still have a ways to go to get back on track... 9/17: I fed them boomerang only twice this week, and gave also them kangaroots yesterday. They are both looking strong, and branching well. I'll prolly flip to 13/11 with emerson effect in the next couple of days.