Recommended
Likes
Comments
Share
Day 22 of Flower! Did as much lollipopping as I can in a Days work.. will continue through the next 2 days to touch and clean up the bottom of the canopy. After that..no touching the plants..will let them slide through flowering with just feeds.
Likes
4
Share
@KaliWeeD
Follow
Alguna ya esta ready para meter las ✂️ y las demas .. será cosa de días 🙊🙊🙊
Likes
151
Share
Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens After decapitating the apical bud we will give another week to recover from the shock suffered and then we will spend them in the flowering phase . Stay updated 😝m
Likes
11
Share
Week 9 was a tough week for the plants, but they pulled through! First, we are experiencing a heatwave where I live which has caused me some headaches for figuring out how to make the environment plant-friendly. Growing indoors is much tougher than I thought it would be 😅. So the room where the plants are has reached the max temperature of 38 degrees celsius. I decided to take the plants out of the tent and into my bedroom facing the west side window for ultimate sun exposure. Unfortunately, I cannot have the plants in my bedroom overnight since my husband has allergies. So, I placed them back in the tent at night. Throughout the week, I took some timelapse videos of the plants in front of the sun, and it is truly fascinating how plants understand the power of the sun, soil, water, and air. I think that plants would rather be grown by sunlight than LED lights, they get to move to the rhythm and speeds of solar and ecosystem, and it's amazing to witness in timelapse! Anyways, by the end of week 8, the plant looked hungry and big enough to be repotted. So, I gave it some Gaia Gree all-purpose nutrients and repotted her in a larger container with some fresh soil. The first few days of repotting, the plant seemed to have experience stressed. Its leaves were floppy, and there was not much growth. By the end of week 9 the plant looked much happier, fuller, and greener!
Likes
36
Share
@Xpie77
Follow
Just find out from the 9 plants there are 2 Hermans.
Likes
65
Share
Day 57: Watered the plants 0.5L with nuts 796 ppm, 1693 us/cm, PH 6.4 Day 59: Watered the plants 0.5L with nuts 830 ppm, 1765 us/cm, PH 6.4 Did some defoliation Used neem oil to prevent any pest Day 62: Watered the plants 0.5L with nuts 769 ppm, 1629 us/cm, PH 6.4
Likes
14
Share
Decided to combine all my tents diaries (Wanted to have single strains for contests but its just silly with a scrog going) Great week - All the plants have been through some LST to get the canopy more flat as the back side has more sativa dominant plants. All handled LST really well + SCROG net is up for next week. Flipping to 12/12 this week after a defol + taking clones of each plant for my Phenohunt (Looking for bud with the most bag appeal EX: purple/blues and golden colours that are not usually seen + a good strain to grow in a scrog)
Likes
42
Share
@Coopmc
Follow
Full of seeds from SubLIMEinaL Pollen!all kinds of seeds now cross fingers there good! Buy looks of the seeds about a week or two left Looking like the seeds are going to be small Sativa seeds
Processing
Likes
22
Share
Semana tranquila. Algunas hojas inferiores se están poniendo amarillas por falta de luz. Este cultivo decidí no quitar hojas y dejar que las plantas tuvieran el mínimo de estrés, por lo tanto las hojas inferiores no reciben luz. Las flores han aumentado bastante de tamaño y ya comienza a oler bastante rico el cuarto. Están consumiendo prácticamente dos litros de líquido al día. Buenos humos para todos!
Likes
12
Share
@Sieben
Follow
Well i wanted to harvest , but trichomes say wait a lil , so i give em some days or a week, plants getting ph corrected water only since a week. I'm still unsure to harvest all or only the big ones and give the bottom buds and the Mutant "Haze" Lemon Orange another week... But overall i'm impressed and satisfied with the results , guess in germanation seeds may got a lil too warm and thats why Gran Jefa hermaphrodited and other Fullgas Not growed. Can't wait to harvest 😁 Left Gran Jefa, right back Fullgas , right Front and mid Lemon Orange.
Processing
Likes
4
Share
21 days of flower 🌸🌼 Big tall pheno
Likes
8
Share
@Artyparty
Follow
Buds got really dense this week. The smell is definitely more intense. I also defoiled for any tops that were getting covered. Other than that just waiting on them to ripen some more so I can flush next week.
Likes
29
Share
@Twizz
Follow
Things did'nt go as planned. I decided to harvest her this week, she was 7weeks in to flowering and looked allready good. The forecast predicted some stormy weather for the next week and i did'nt want to take the risk to get her destroyed because of the weater or deseases. besides that she had 40% of orange growhairs and milky trichomes. If the weather was going to be better i would have let her life a week or 2 longer. update: We are one month after harvest the buds are dry and have been (or are still) curing. Its allready pretty smokeable! 'best homegrown I ever had' is a frequent comment when i let others taste the buds.
Likes
3
Share
Starting low-stress training of the two main branches after 1st topping.
Likes
9
Share
@Kayotic
Follow
* Smells very strong now, hint of grape and intense gas scent * Buds are starting to fatten up * Watering twice a day * Supposed to be over 100 degrees today and tomorrow
Likes
9
Share
Hi Gromie's, upped nutrients & turned light up to 75% (360w) which has helped raise the temperature to 22-24°c. Have had really good growth this week have topped a 2nd time and training branches , using nebula haze's (grow weed easy.com) mainlining method keeping the first & 3rd node's. Untill next week 👍☮️
Likes
23
Share
This week went very well! One will be getting cut an hung to dry while the rest finish up with one more week of flush ! These ladies are smelling so lovely I hope you all enjoy! Stay tuned for next week! Cheers 😤💨💨💨💨💨
Likes
10
Share
Week 6 flower : I stopped the pk half way through week 6 so it had a total of 10 days feed with pk13/14 I also cut out the silicone and calmag on the same day . I defoliated a little as there was a lot bud sites covered . I am going to start the flush in 3 days which will be . .6 1/2 weeks into flower , going to give them 2 weeks flush with plain water . Still have a bit of leaf curl from the light being so close I did move it but because the canopy is not so even it’s hard to get it right .
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
114
Share
Well we are now at DAY 70 from seed and 42 Days of Flowering 🍉 🍉 🍉 So shes been doing reall well ☺️ I have moved the feeding to accommodate the next step in flower 😀 So there now full steam ahead 😋 yet again 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 🍉 Thanks 😊 my friends for the support 🙏👊