Auto Kabul - Divine Seeds

👋 Hey y'all! I know that I have been "gone" awhile and I am sorry for leaving y'all hangin'! A lot has happened in my life. New baby, new house, and new grow projects! If any of you follow me on Instagram, then you already know about my autoflower tent. I haven't had much time to tend to the medical garden and have handed most of those responsibilities off. I still visit every so often, but I won't be documenting those grows here any longer. Being that we are in a new house, I want to expand my home setup and I have some exciting stuff planned showcasing some top notch genetics! Now on to this grow! 🚿 Reservoir and drip details: I have 7 gallon bucket with submersible pump going to four halo type drip rings. I have a manual shutoff switch to turn the pump on or off at the touch of a button. My tent has two tiers and the plants are not hooked up to the halo drip rings until they are moved to the lower chamber. Prior to that they are manually watered. I am using reverse osmosis water. I have a 24"x48" low tide tray in the bottom of the tent and a 24"x24" high tide tray in the top chamber. 🌬️ Ventilation: I am using an AC Infinity 6" fan with the upgraded Cloudline 67 controller. The fan sits on top of my tent with a silencer on the exhaust side of the fan and on the intake side I have ducting run into the top of the tent and hooked to a carbon filter inside. I also have three oscillating fans tower fans inside the tent. The largest of the three hangs upside down from the top shelf to create airflow in the bottom chamber. On the top shelf there are two desk type oscillating tower fans. One set to oscillate and move air and the other pulls air from the lower chamber up towards the top chamber. All fans direct air from opposite side of the filter towards the filter to ensure air movement is efficiently pulling fresh air and CO2 throughout the tent and also exhaust heat. 🌱 Medium: I am using Royal Gold Tupur with a lot of added perlite. I have been reusing my medium for this project for over a year now. To eliminate and prevent bugs. I rinse after harvest with boiling water and a surfactant and again after I place it in a fabric pot about 48 hours before planting. For starting seeds I bought some small plastic cups from Walmart. Not the party cup type, but the reusable juice type cups. I put holes in the bottom and side about a half inch from the bottom. I fill them with medium with enough room for covering about 3/4 of the Jiffy style peat pellets I am starting seeds in. 💡Lighting details: I use an Android app called 'PPFD Meter' to dial in my lighting. I run my lights for 21 hours per day and rather than focusing setting a target for ppfd, I set a target DLI. For the first 3 weeks I shoot for about 13-19 mol/m2/day, then 20-30 mol/m2/day until plants have starting pushing pistils for a week or two, and then 35-50 mol/m2/day. These are my target ranges and do my best to maintain, but, with the variation seen in autoflowers... It's hard to keep a perfectly even canopy needed to maintain consistent light levels for all plants. If anyone has any questions or would like more details, please let me know. I am excited to be back with a new diary! Thanks for stopping by my garden y'all! ✌️ PEACE 🤟 LOVE ❄️🌲 & FROSTY NUGS!