By continuing to use the website or clicking Accept you consent to our cookies and personal data policy and confirm that you are at least 18 year old. For details please see Privacy Policy and Terms
I water with a lot of water and I plant directly in my mixture of 70% coco, 30% perlite.
Water : tap water at 280ppm. I adjust the Ph to 6.
Temperature : 21°C
Humidity : 60%
------------------------------------------
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
The Ztraberry's starts well. I use this bulb not very effective but for the first week it works
------------------------------------------------------------
Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 500ppm and i adjust the ph to around 6
Temperature: 22°C
Humidity: 50%
only one photo this week. The next one will be more provided.
I replaced my 25w cfl bulb with my 250w HPS, my plants said 10x thank you
-------------------------------------------------- ----------
Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 500ppm and I adjust the ph to around 6
Daytime temperature: 28°C
Night temperature: 21°C
Humidity: 50%
Last week before I spend them in my 1m² tent.
When the lamp comes on my humidifier is still on.It is essential because my HPS heats up too much and dries the air.
I will receive a 300w led lamp next week :)
-------------------------------------------
Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 550ppm and I adjust the ph to around 6
Daytime temperature: 26°C
Night temperature: 21°C
Humidity: 50%
-----------------------------------------------------------------------------------------------------
-Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8
-Daytime temperature: 25°C
-Night temperature: 22°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
I changed my tent this week, the lamp and the Mars Hydro extractor convinced me that it was good gear so I took the tent in + 😀
Pulling all the branches with ropes is way too much work... I think I'll just pull the 2 main branches down and add a scrog net next week
-----------------------------------------------------------------------------
-Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8
-Daytime temperature: 29°C
-Night temperature: 25°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
This week i flush the roots with tap water ( PPM : 310 , PH : 7.5) after i add water with 0.7 grow powder and 0.1g of Booster PK+ to reach 720PPM and adjust PH to 5.8
----------------------------------------------------
-Daytime temperature: 27°C
-Night temperature: 23°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Flowering begins.
I did defoliation on the lower tiers on day 4 of flowering
------------------------------------------------
Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days
-Daytime temperature: 27°C
-Night temperature: 23°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller
I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5.
There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket
------------------------------------------------
-Daytime temperature: 24-29°C
-Night temperature: 22-27°C
-Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) )
-Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 3/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold
I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity.
---------------------------------------------------------------------------
- Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule.
-Daytime temperature: 22-26°C
-Night temperature: 20-24°C
-Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) )
-Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 3/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
- Water: tap water at 300 PPM, I add 0.6g of Hybrid powder and 0.4g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule.
-Daytime temperature: 21-26°C
-Night temperature: 21-23°C
-Humidity: 55-80% :/ too high
-Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 3/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
it's been 2 weeks since it's 60% humidity and I can't go below :/
I noticed mold in 2-3 buds of my Ztrawberrys ;'(. I tried to remove the moldy areas with my pruner but it was moldy all the way to the center, I decided to just rip it off a bud. I don't know if it's a good solution, it's the first time it's happened to me
Hello, i noticied mold in som buds :/ i cut the mold but it went all the way to the center. I don't know if it was a good idea.Do you have any advice for me ?
rot is no good.. cut entire colas off that exhibit any discoloration. cut widely around any rot moving exccess material.
like others said.. weigh options of early harvest. probably a good idea. that stuff spreads easily once it has a foothold.
little different animal than wpm.
another sign rot is lurking underneath a bud -- dead sugar leaves. that can happen before you see any discoloration, too.
La ztrawberry à très bien poussé, avec beaucoup de paire de bourgeons qui se sont former tout au longs des branches en plus de grosses têtes principale.
La ztrawberry à très bien poussé, 👏avec beaucoup de paire de bourgeons qui se sont former tout au longs des branches en plus de grosses têtes principale.
De quoi produire beaucoup normalement. Malheureusement pour moi j'ai eu des problèmes de moisissure 😣dans ma culture et j'ai perdu quasiment tout les gros bourgeons de cette variétés.😴💤
Je crois que j'ai surraroser et peut être sous ventiler en floraison :/ C'était une vilain problème que j'ai rencontré lors de cette culture. C'est la 2ème culture que je fais de ma vie d'ailleurs.
J'ai pu sauver tout de même 60g de joli bourgeon sain de mes 3 plantes de cette variété. Et je les trouves très bons, j'aurais aimer en avoir +👹
Je vais faire de mon mieux pour que mes prochaines cultures soient meilleures et ne rencontre plus ce problème !👍👌
@Seedler,Thank you for the advice but I prefer to do a journal by varieties.
It is true that the last few weeks are somewhat similar. I had trouble taking pictures of separate plants since I installed my scrog.
But I just removed my scrog this week to be able to water more easily. I should also be able to take better pictures of each variety 😊
Hey mate. I'm blocked from sending mes.
I've about 70 female strains. About 15 from GHS. 2 autos. Lot of there new ones. And 2 of their 23 auto releases, (I've also both fems of them strains also, & about 12-13 of their fems. 5 from Aneisa Seeds (new ones 34-37% thc high mars, jealousy dankness, future#, epic buzz, the sin) msnl animsl mints and Slurircane, and a host of others. They're just my new ones. 4 of the 23 new Barneysfarm releases. Sweetseeds, original sensible seeds, Kannabia, fastbuds FF, and a few others.
Send me your email in chat.