By continuing to use the website or clicking Accept you consent to our cookies and personal data policy and confirm that you are at least 18 year old. For details please see Privacy Policy and Terms
The sprouts were planted in peat tablets, but soon they had to be planted in the substrate because the peat began to crumble. Also, one sprout could not open the cotyledons and began to turn yellow. I tried to open the cotyledons and one broke off. The tiny leaves are still visible and seem to grow. Soaked the third seed if it dies.
Well .. This is the end of the second week of the vegetation. The first bush grows pretty quickly. The second one has just begun to open the leaves and it seems to me that he will not be able to grow into a full-fledged plant. There are also some problems with the leaves of a healthy bush, they are twisted a little. Well, maybe I'm wrong .. I started to apply nutrients much lower than the recommended dose, from next week I will increase the dosage, but I don’t know where to put the remaining solution, because it’s still about 3 liters, but you cannot add new components to the ready-made components (or not?). I really like to see how girls become prettier and prettier. By the way, my ph meter is constantly changing numbers. Immediately after entering the ph down, it showed about 6, but now it shows as much as 8. I'm thinking of buying a new one.. If you have any recommendations, I will be immensely grateful <3
Hi there, As I can see in your photos, Your temp and Humidity is not optimal for this stage.It will be better if you can lower your temp around 27C and raise humidity around 60% for vegetative stages.I think these abnormal twisted leaves are caused by low humidity at early stages.Another thing is you are growing in Coco/Perlite mixed and sudden swing of pH or improper substrate pH would also lead to problems.Happy growing... ✌️
Hello! A miracle happened this week .. the diseased plant started to grow. I think during the time until it showed signs of life due to damaged cotyledons, it grew roots, as the leaves grew very quickly. But I'm not sure.
Another plant also began to grow leaves at the base of the stem. I counted 4 growth nodes. When there are 6 of them I will try to make main lining.
Since the leaves are already beyond the boundaries of the pot, I think to replant in a couple of days. I would be grateful if you can tell me when it is better to transplant.
This week I transplanted one plant into a 20 liter pot and tried a main lining after reading a huge number of guides. The operation was successful and I even tried to take clones, because it was very disappointing to lose such a large top of the bush. I put it and other branches in a rooting stimulator and tried to plant one after 24 hours in it, watering abundantly.
The second bush began to grow rather quickly, but I am confused by the different size of the leaves. Most likely I will not train him, the maximum is lst.
Please tell me what is better to do with clones? At the moment they are in a cheap liquid from the store. I didn't buy clonex because I didn't plan on making clones. I would like the top of the plant to turn into a full-fledged bush👺
Thanks for that additional info. I’m still unsure exactly what you’re doing but generally if you are rooting in water then you are ok to leave the clones in there while replenishing fresh water (and fresh O2) every few days until you see roots drop (7-14 days after cut)
If you are following a traditional/regular cloning technique - e.g., take cuts, add beneficials or rooting hormones, root directly into cubes, rock wool, soil, etc., then you don’t soak the clone stems for that long of time (2 days you said right now?). When I used to use rooting hormone I would let them sit for 15-30 min.
I would take those cuts, cut off anything that looks soggy, and then move them into rooting plugs right away.
Hope this helps
I did my second cut this week. Not much to say. The plants look healthy. At the second bush, one pair of leaves grew very slowly, which is why their petals became very wide, huge, I would say. I still don't know how to train him. And is it really worth it?
Hello. This week I have not cut the plant as the third node is still too small. I decided to make lst to the second bush.
seems to have worked out well.
One of the clones gave very good roots.
Also, when watering, I noticed that the second bush (lst) has slightly thicker roots than the first. Both plants show roots at the bottom of the pot.
Hello everyone. This is how my plants look at 6 weeks of growing season. I watched another reports and I think that my garden lags behind on 1-2 weeks, but I do everything right as it seems to me. Nevertheless, I love everything. I EVEN RAISED A QUADCOPTER! I think to put on flowering in a week. The bush with lst grows very quickly, only clones have begun to grow faster than it, they look great and have given large roots. The problem is I don’t know where to plant them, I only have one large pot and regular soil for home flowers. Can all three clones be planted in one container? All the same, I do not count on the harvest from them. I want to grow one single bud on each clone 🤪 sog, right?
And I also have a problem, someone started eating leaves, although I grow it in a homemade box in an flat and there can be no bugs here. Could it be a burn?
PS I'm an idiot. I accidentally found out that canna leaves can be smoked and they work. After defoliation, I was left a handful of dried leaves, but not activated. I read that THC is activated at a temperature of 226 degrees and put all the leaves in the oven 🙂 Now in my flat the smell of burning is mixed with aroma sticks and perfume, which in total gives a f🧚♀️cking smell of shit 🙃
Caterpillars, moths, or gnats. You'll know when you see them. Check undersides of every leaf and keep an eye out for droppings. Doesn't look like ypu have more than a couple so thats good news.
Hello! The day before flowering, I defoliated by cutting off all the large leaves and leaving the smaller ones. I wanted to make a schwazi, but did not dare, for the first grow I have enough experiments. I urgently need a support for the plants !! The bush with the main lining is too high and covers the second one. I ordered a flowering stimulant and a bio-protect, I hope it will be better.
Ps. As I write this, it's the second day of flowering, and I can already see small white hairs.
Hello! Finally, I transferred the bushes to flowering. At the end of the week, white hairs were already visible. I started pouring the flowering stimulant and sprayed the bushes with bio protect from ghe.
In general, that's all. Happy New Year everyone and big buds! 🌲
Hey. I am facing a problem. After purchasing a charcoal filter, the exhaust fan began to cope worse with the volume of air, which is why the humidity inside the box increased. There are jumps of up to 70-75 percent.
The rest of the buds grow well, you can already see how they become larger.
I also put a bush with lst and clones higher, they did not have enough light.
Whats up. The buds have grown significantly this week. On the bush with main lining there are already THC crystals, on the bush with lst there are fewer of them, I have not seen them on clones yet. In general, a bush with Main-lining blooms faster than the others, I don't know what this is connected with, possibly because it was closest to the lamp at the beginning of flowering. It also has a lot more small bumps on it than on lst. Perhaps I did the training the wrong way, and perhaps main lining is many times more effective. After harvesting, I will compare the weight of all the cones from different bushes.
The plants have stretched 10-15 centimeters from the first week of flowering.
Smell. I don't feel a strong smell, the filter helps. If you sniff the cones, you can smell something sweet, I can't understand what, maybe something citrus.
In general, everything is going well, I am waiting for when I look into the box, I will see big orange buds🤩
Well... everything is going well, I think. The bushes almost doubled from the transfer to flowering. The bush with main lining has grown by 1 meter ...
The buds began to smell strongly of caramel (?), But the smell does not leave the tent. Plus they've become very sticky ..
I also don't understand why the bush with lst has thicker cones and stigmas than the main lane, but shorter. There seems to be more crystals on the lst.
The cones on the clones never cease to please .. I did not expect to see any result from them at all, because 3 clones are in a very small amount of land and nevertheless grow
What’s up dudes. At this moment buds are growing a bit slower, I think they are starting gain weight. They have became thicker since last week.
I wanna make homemade CO2 generator for grow was more intense.
Also by this time I still have elevated humidity about 60%. It’s more higher right after watering. I will buy air dryer with replaceable packs. It’s more cheaper than electric dryer, wich can costs about 230 dollars. (In my country).
Lower LST bush leaves have stilled yellow with burn edges. I think it’s overdose, but on main lining bush it’s not. Last EC drainage was about 3k, PPM I forgot =))..but EC nutrients about 1.3k. I will abundantly watering pure water tomorrow.
Well.. I wait dry weight about 60 grams from 2 plants.. maybe a little more. I think my bushes haven't huge coals and hardly will have become big by the last weeks. But anyway I hoping for the best.
Good grow and mood mates :)
Hello. This week I discovered that one of the clones had become hermaphrodite. I managed to cut it down and actually harvested the first crop lol. I hope he did not have time to pollinate other plants, at least so far I do not see seeds on them.
Hey! An accident happened this week .. when I was pulling the bush out of the tent I accidentally almost broke the main branch of the bush with the main lining, it bent 90 degrees. I attached it to the flower support, everything seems to be fine, nothing dries or fade.
Also the problem is that my lamp is very close to the tops of the bushes, which causes the leaves to curl. But I cannot fix this, I cannot raise it higher. This is one of the lessons I learned from the first grow - growth control. I thought that the higher the bush, the more buds it will have, but I was wrong. Nevertheless, everything is going relatively well.
The bush with LST still dries and turns yellow from below. I don't know the exact reason. There was a high ppm drainage, I rinsed the substrate with clean water in two waterings. I will watch.
In general, that's all. Bye bye!
Hey! I am approaching the finish line, 2-3 weeks left before the harvest. going to buy ripen soon.
The longest report is over, thanks for your attention! 🤡
This is the penultimate week before the harvest. The buds are filled with a purple hue, and they also break branches under their own weight. It was the stake that broke a few weeks ago. Well, it was almost ripe anyway)
Ps. I kept the buds from the clones in a baby food jar and thought it was because of this fruit puree smell, but no! This is the smell of the buds themselves.
This week I have been watering half the dosage of ripen. To be honest, it seems to me that he did not give anything during this time, except for a couple of yellow leaves on the main lining bush.
As I said, this is the first experience, and I consider it quite successful, 8 out of 10. Next time I want to buy a more powerful lamp, fertilizers from advanced nutrients and make a higher quality tent. I WANT TO ASK YOU TO RECOMMEND ME A STRAIN in the comments, which will give euphoria or some interesting effect, because most varieties only make me paranoid, a desire to devour and obsessive thoughts.
Thanks to everyone who helped me with advice and appreciated my progress)) I'll be back✌️🏻
Fresco
