Likes
Comments
Share
En la 6ta semana de vegetación hicimos una poda de bajos y desfoliación en general para potenciar el crecimiento de los brotes superiores, mejorando la iluminación y ventilación en el cultivo. También hicimos unos cuantos amarres (lst).
Likes
6
Share
@BoooBooo
Follow
Plant started really good. unfortunatelly, humidity and temperature is very low, but she is good for that stresses I guess )) i’m working on both problems, hope all conditions will be perfect soon and she will be a monster ))
Likes
58
Share
@DailyDabs
Follow
Starting week 6 of flowering and she is looking beautiful. She is really starting to resin up and sparkle now causing her to be pretty stinky haha.
Likes
9
Share
Plants are blooming well, in a few days I'll do a little defoliation
Likes
19
Share
@Chucky324
Follow
Hello. This is the end of week 8 and the beginning of week 9 of flowering. OK. Last look at these plants before harvest. Thought I might harvest this week till I saw the weather forecast. it was 32*c here yesterday and about the same today. It gets about 4* to 6* degrees hotter in the greenhouse and was 35*c in there when I was taking pics today. Over the next 10 days or so it will be much cooler here, so I'll start harvest on Sun. It should take me 6 to 7 days to finish , and those will be long days too. Just stopping for food, smoking and life's small emergences. OK. Keep Growing Straight. Chuck.
Likes
27
Share
4/1/2023 Week 7- Day 1 of Veg (Day 59 overall) Water Change Day!!! Water was really low it was just above the hump in the Res cutting it close to not having enough water in the system to keep it going. They drank a lot making it close going the full 14 days. I am still going with the previous grows and adding 36 Gallons but even looking at the root I think the SILICA is working and the roots are further along at this point than in previous grows. This next two weeks will watch how much they drink and how low my Res starts getting, and will make a decision on changing the water weekly from here on out or still keep on the plan of every other week until Week 4 of Flower. Added 36 Gallons Mammoth SILICA= .5Mil/Gal = 18Mil CALMAG= .5Mil/Gal = 18Mil Root Drip= 1Mil/Gal = 36Mil FloraMicro = 5.4Mil/Gal = 194Mil FloraGrow = 4.2Mil/Gal = 151Mil FloraBloom = 4.6Mil/Gal = 166Mil ORCA = .5Mil/Gal =18Mil PPM= 536 PH=5.84 PPFD=500 Tent Temp= 76.5 Water Temp= 71.4 Humidity= 58% 4/2/2023 Week 7- Day 2 of Veg (Day 60 overall) Not much today, PH was at 5.81, I brought that back up to 5.90. I took care of some badly needed defoliation in each of the back sides .. I was able to see some really good clone material to use on the lower backside of each of the plants. I will be taking two clones from each to breed over the next few weeks depending on when I am going to flip them. 4/3/2023 Week 7- Day 3 of Veg (Day 61 overall) A little FIMing, A little Topping, and a Little bit of defoliation. Might have to take my clones during the week this week, I am trying to wait until Saturday to hit week 8 but again they are getting all over the place and I need to trim some of the sides and lower areas. 4/4/2023 Week 7- Day 4 of Veg (Day 62 overall) I decided to take my clones and clean up the lower half of the plants. I took 2 clones from each plant to go into the cloning machine. 4/5/2023 Week 7- Day 5 of Veg (Day 63 overall) Water Temp is sitting at 73. Right in my ideal range for my setup. Ideal range 70-74 My Temp Tent is my ideal zone75.6 Ideal for this grow 70-78 The lights are still waiting the switch to flower to get maxed out... The Humidity is coming in right at 60% I love it.. I took so much off yesterday I figure it was a good day to let them rest. 4/6/2023 Week 7- Day 6 of Veg (Day 64 overall) I needed to Defoliate some and I topped a little. The plants might force me to flip them soon. Next Wed is the 10 week mark half way through the 20 weeks. The net is Bingo... Which means that If/when the plants hit the net I will have to flip them. The Net is set to the max height that I can let them get based on the Breeders Stretch report 75%. 4/7/2023 Week 7- Day 7 of Veg (Day 65 overall) #3 is 22 inches Tall, #2 is 19 Inches Tall. Net is set at 24 inches. Net is also set as my Bingo point, if they hit the net then I have to flip no matter what to account for the Breeders recommended 75% Stretch allowance. I think I am going to have to flip right at the 10 week mark of the Competition which is Wed 12 Apr. I topped a little, I de-foliated a lot to start getting it ready for the anticipated Flip.
Likes
5
Share
6ª Settimana di Fioritura 💐 Ed ecco che un po di neve inizia a despositarsi sulle sue belle cime🏔️😘👍🏻
Likes
2
Share
Flipped 5/18. Roots are all established and now bottom watering only. Did a little scrog action to try and control the stretch a little and shoot for as even as possible in the canopy this time. Cheers!
Likes
8
Share
Que pasa familia, vamos con la tercera semana de floración de estas Monster Maker feminizadas de Sweetseeds. Vamos al lío, las plantas se trasplantaron a macetas de 7 litros. El ph se controla en 6.5, la temperatura la tenemos entre 24/21 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 70% de potencia. Me gustaría estar más encima este cultivo pero la salud me está impidiendo un poco este 100% con el proyecto. Con suerte la semana que viene andaré mejor. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
2
Share
05/17 - Both are vegging accordingly - applied a hard LST to even out the canopy and distribute light coverage around the plants - Both are currently in 1 gallon pots - Both will be transplanted into 5 gallon pots by the end of the week - I will begin micro-dosing their nute feeds to negate transplant shock.
Likes
29
Share
Buenas noches fumetillas, abro ya mismo el diario de las green poison de sweetseeds, una variedad con una floración rápida que crecerá bajo unos Leds de la marca mars hydro. . Quitando el equipo el control básico es ph 5.8 temperatura 22/24 grados y humedad 70/80%. . La alimentación de la gama agrobeta. 0,5 ml x L Piramid , vía radicular. 0,5 ml x L Growth black line , vía radicular. 0,1 gr x L Cancerbero , vía radicular. 0,1 ml x L Tucán , vía radicular. 0.1 ml x L Flash Root , vía radicular. 0,4 ml x L Great Green , vía foliar. . Para ser la primera semana esto es todo en verdad, un saludo y buenos humos 💨💨💨
Likes
15
Share
@Philhsy
Follow
My biggest harvest yet, 385g dry oh my god. Never thought hydro could yield sp much so fast. And fastbuds genetics helping me achieve that. The strain is so potent we smoked a joint 4 people and had to put it out bwcause everyone got so stoned. Wonderful. But curing now so im looking forward to those terpz and maybe a little else you never know what surprises beholds. Hsy out!
Processing
Likes
20
Share
@mikemobes
Follow
7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.
Likes
29
Share
Nach der ersten Woche sehen wir deutlich den Stretch Beginn. Die ersten Pistillen sind da und der Rest steht in saftigem Grün. Gegen die Thripse-Kack-Scheiß-Dings-Bums habe ich nochmals eine ordentliche Ladung Florfliegen bestellt. Bei der Größe sollten 500 genug sein. Der Jungel unten rum wird dann mit dem Lollipoppen gerichtet. Das wird Arbeit! Die Radical ist Hart am Triebe schuften... Das Netz beult immer weiter. Das hebt sie sich deutlich von der Watermelon ab. Schauen wir mal nächste Woche! Wer den Einzug ins Zelt sehen möchte, die Folge 7 ist Online!
Likes
8
Share
@Kirsten
Follow
31.12.24: I have been readjusting the LST pegs and wire daily. Sometimes, twice a day! (I know, too much time on my hands)! 😆 The plants have responded fantastically! I'm so glad I gave it a go. Some plants have been a bit too tall, and I snapped Do-sì-dos P3, pulling the stem down. Audibly snapped 😬I let it be, though. It seems to have healed mostly, in only 2 days. I have increased the lighting to 70%. They're getting watered a few times a week, with 1 litre of Dechlorinated water, containing the following nutrients and additives; 1ml of Biobizz Bio-Grow, 1ml Biobizz Top Max, 1ml of Biobizz Bloom, 2ml of cal-mag, 1g of Ecothrive Biosys. The plants are responding well to this concoction, so it's all good so far. The leaves are looking greener and are getting darker. Will be monitoring to continue readjusting the LST ties. Also, to monitor the increased lighting level, to make sure they can handle that yet. 1.1.25: Happy New Year! I have continued to readjust the LST wire and plant pegs. Several times a day. Coincidence would have it, I have a 6ft tropical aquarium which was time for cleaning! I always water my Acer tree in the front yard with this water, with beautiful results 😍 👌 🍁 I decided to try it out in my indoor garden. I'll post photos of before and after to see the difference, good or bad 😅 3.1.25: Plants are doing very well, except for PPP3 I'm quite disappointed in that one, as I feel like it's wasting a space. I guess I'll have to keep it, along with the Do-sì-dos that I snapped twice, which refuses to die 😅 I started to lightly defoliate, which is difficult because I always get carried away with it. I'm going to water again with the nutrients in description of this week. 4.1.25: Continuing to defoliate and adjust the LST pegs and wire. Watered today with 1ltr of dechlorinated water PH'd to 6.0. With the following nutrients;- 2ml Biobizz Bloom, 4ml Biobizz Bio-Grow, 2ml Cal-Mag, 2ml Ecothrive Flourish, 0.2 g/ltr of Ecothrive Biosys. I've increased the Nitrogen by adding double the amount of Biobizz Bio-Grow. I'm trying to keep them growing for as long as possible! I really want to keep the strength up and keep the leaves nice and lush green! 💚 Will update here with more photos and videos. Thanks for checking out my diary 🍃 ✌️
Likes
51
Share
@wolfvb
Follow
The Big Bang of Flavor 🍭✨ "And just like that, the universe expands. I’ve officially cracked open the Mellow Jelly (Positronics x Zamnesia) and the magic is already starting to happen. ​These seeds will not just 'sprout'; they will wake up from a sugary slumber. Watching that first white taproot break through feels like seeing the first spark of a neon galaxy. The genetics here (Rainbow Flakes x Sunset Sherbet) are top-tier, and I can already feel the 'mellow' vibes taking over the grow tent. ​Time to pop: 3 days and she popped like magic ​The jelly is officially starting to set. Next stop: Seedling city." Get Your seeds: https://www.zamnesia.com/us/?a_aid=Wolfvb
Likes
58
Share
@Haoss
Follow
I made a topping for the plant and I transferred it to a 50-liter pot, removed the first branches, I am going to top it with 32 branches. feels good 🌱💚