💩Holy Crap Growmies We Are Back💩 Well growmies we are 63 days in and everything is going as good as it can👌 Afraid she's had some major issues but that's just how it goes folks 😉 she's definitely on the mend 👈 👉 Shes a short chunky little plant,😉 Lights being readjusted and chart updated .........👍 Even with early major issues due to the soil/medium she's come a long way 👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Another good week inside the tent. The girls have kicked into flower, and are throwing out an absolutely gobsmacking amount of pistils at current. Also, leaves are starting to get a little dusting of frost. Very good signs this early. Timelapse is out and updates will be posted as things happen. Keep eyes peeled for some EOS rebel shots this week. -10/15- Eos Rebel shots are out, showcasing the huge masses of white pistils at each budsite.

9/11/25-9/21/25 I have been cleaning them out slowly. Probably took too long to really lollipop them all. They almost all have that nice look with tops everywhere. Clean out the insides and all water leaves to make sure light and air penetrate. At this point as you go through you really need to be separating your buds from the stems to help avoid mold build up, check for bugs or any older fallen leaf pieces that may be stuck to a bud. This step is pertinent for both inside and outside growers. Also you don't have to be overly gentile doing this. Obviously no need to be extra rough but plants can take being handled. I try to complete this process every couple days especially as we get closer and closer to the end game. Watering every day and using Bud Candy and Bembe x 2 weekly. Will move to the flush process by 9/28. Going to start flushing the Sunset Sherbet and Gorilla Skittlz this week. Weather has been great 85F and dry, 55-60f at night. Rain is expected to move in this week and I will be pulling a few plants soon as they are a little more dense. Any questions just ask, super ready for the end. May she always shine on your garden.

Vamos familia, actualizamos la tercera semana de vida de estas Frosty tooth de Seedstockers, salieron las 5 de 5, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de crecimiento. La tierra utilizada es al mix top crop, por cambiar. De 5 ejemplares seleccioné los 3 mejores para completar el indoor y trasplanté directamente a macetas de 7 litros, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

This is the first day of the first week of flower in the first video and the 6th day of flower in the second video.. you can see me shit myself when I saw that one of my main top sights snapped from tying the branch down … the lights were using are lights we designed and are testing at the moment also we are trying to keep a good distance between the tops and the lights to keep the temps down around the bud sites ! You can tell there are a couple other strains thrown in there the one purple punch from Barney’s farm is just Caking on nodes upon nodes like it’s impossible to get light to them unless they are pulled down in really liking the structure of the ocean fruit and am looking forwards to the finish!

UPDATE AFTER A LONG TIME, i'll post more often. I only recovered a few videos from last couple years to share. Mango is dense, but doesn't give out much trichome as I expected. So, I took a risk and poke a hole in the stem to gave a lot of stress to the plant, so the plant gave out a lot of trichomes and the bud becomes a bit bigger.

It is still hot here and all my girls are suffering. We´re almost done and I will start checking the trichomes now. I had to add some support to help keep the heavy buds upright. Both plants are getting beautiful buds that smell amazing.

Si sta per concludere la seconda settimana, stanno alla grande, le foglie ingrandiscono a vista d'occhio! Bello vederle crescere!!😍😍

She packing up buds pretty good She is still on same diet and looks to be doing great If she thickens up she will become muy bien 🙌😎

Patience is a virtue. I'm looking forward to making hash out of the center plant :). Day 87, cleaned out hosing in dwc, got a few pictures outside the tent.

🗓️ Week 12 – Flower Week 8 (MAC n Cheese only) Stage: Late Flower MAC n Cheese is now fully into late bloom and continues to impress: 🌿 Development: • Buds are dense, frosty, and maturing evenly across the canopy • No significant leaf discoloration • Aroma profile is becoming increasingly intense – leaning towards creamy and earthy notes 💧 Feeding & EC: • Input EC: 1.65–2.0 • pH: 6.3 • Current runoff EC: 2.3 → Still well-balanced, no visible signs of overfeeding despite the elevated drain values Flush status: No flushing yet – plants are still feeding actively → Final flush with Flawless Finish planned in ~1 week ✅ Summary: MAC n Cheese remains healthy and consistent. Structure is solid, frost levels are high, and everything looks on track for the final push. Late-stage nutrient uptake is still strong without stress indicators – ideal conditions heading into the home stretch.

So we got some nice bud formation so far, the thricomes showed as first on the og kush and pretty fast, it allready smells like it tastes and I can't wait for it to bulk up even more I'm exited for this one as it got huge! Branches with lots of buds on them and they are like 80cm long from bottom to top or more... I can't wait for this smoke... Need to be careful with the neighbours it really smells strong right now.

In her last days. Flushing her and letting her ripen up. The main cola is bigger than my fist, but the lowers are all popcorn. Super stinky and resinous. Unlike any plant I've grown. Stinks up my whole house when i leave the grow room door open.

Week 3 Flower (Bloom Week 3) – Daily Tasks Evening (Lights On) Check environment (temp 24–27°C, RH 55–60%). Inspect leaves and buds for pests, mold, or deficiencies. Water/feed (depending on medium): balanced bloom nutrients with slightly higher P and K. Ensure good airflow (oscillating fans). Adjust plant training (light defoliation if leaves block bud sites). Check for early signs of stretch finishing. Evening (Before Lights Off) Ensure irrigation is not too late in the cycle to avoid wet medium during dark period. 👉 In Week 3 bloom, the plants are finishing their stretch and starting to put more energy into forming bud sites. Main job is: Setting Scrog net 2layers ,Control environment (VPD, airflow) ,Support the plant with bloom nutrients.

Very high germination rate 7 of 7, but the sour diesel didn't make it to the next phase. Tried the SD again and I was successful

Hopefully will be starting flush next week seeing how it is, gonna do a two week flush, yes it is coco but I want a proper flush this time round so o can get that thick white ash we all know and love instead of some nasty dark gray/Black.

💩Holy Crap Growmies , we are outdoors and in the Ground and there Doing Great💩 👉It's been another full week 35 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's now in full on flowering 😁👈 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.