The Grow Awards 2026 🏆
Likes
Comments
Share
Day 35 is here. We are a week into flower and most the plants are just starting to hit that flowering stretch. I have been bending them down a little every couple days, but I need to focus on cleaning up some of the bottom branches so we can keep good air flow through the plants. Will work on that through this next week. I haven't done a water change, just been topping off the reservoir with fresh nutrients as they drink it up. Feeding half and half maxigro and maxibloom. Will cut out the maxigro in a couple weeks when I notice their stretch slowing down. I had a plant overflow this week because the drain line is getting full of roots. I noticed a couple roots have made their way into the reservoir already. I set a pump timer to 1 minute on and 20 minutes off so they can drain properly. I would like to make it through the grow without having to mess with the drains, but we will see what happens. I will make some modifications if needed. Other than that everything is running smooth and I hope we have some little pistils to show by next week. Thanks for stopping by ✌️
Processing
Likes
1
Share
12/8/20 día 21 de vegetativo Hoy comenzamos el seguimiento de estas nenas de 21 días. Hasta ahora han estado en contenedor de 1l y hoy he transplantado al de 7l que será el definitivo para que no cojan demasiada altura ya que siempre hago vegetativos largos.las pequeñas están muy sanas y fuertes a pesar de que sólo han sido regadas con agua base ( 0,4 ec) y ryzofuel, el enrraizante de Cyco. En el próximo riego comenzaremos a fertilizar suavemente y esperemos que las temperaturas comiencen a bajar ya que por el momento están demasiado altas. Veremos como se adaptan a sus nuevos contenedores. No te pierdas las actualizaciones. 14/8/20 día 23 de vegetativo Nuestras nenas se adaptan bien a su nuevo contenedor, no se observan muchos cambios pero todo sigue avanzando bien. Hacemos un riego preventivo con propolix ya que la botrytis es una amenaza constante en mi zona. El riego será de 0,5l por planta. Las temperaturas y humedad continúan sin cambios por el momento aunque en los próximos días espero que bajen un poco. En cuanto el sustrato esté seco comenzaremos la nutrición con la gama completa de Cyco platinum series que siempre me da grandes resultados (podéis verlos en Instagram en @galiforniaweeds). Seguiré actualizando el diario día si día no, no te lo pierdas, dela tu like y sígueme. Buenos humos y prósperas cosechas!! 16/8/20 día 25 de vegetativo. Las nenas avanzan sin sorpresas. He preparado un riego con los productos Cyco indicados más arriba. Es un riego con una nutrición suave de 0,65 de ec y un ph de 6,1. Las temperaturas rondan los 25 grados durante el día y 22 durante la noche, la humedad se mantiene entre un 60 y un 65%. La mayoría de las nenas han ganado un par de cms estos días, actualizare su altura cada semana En la tabla superior para poder comparar los avances. Dejad vuestros comentarios y likes compis. Buenos humos 18/8/20 día 27 de vegetativo. Buenos días compañeros growers.todo avanza con normalidad en nuestro cultivo, las plantas de fortalecen y crecen día a día hoy hemos echo otro riego con los productos arriba mencionados, con una ec de 0,75 y un ph de 6,2. Las temperaturas han bajado un poco y están donde a mi me gustan, en unos 22,5 durante el día y a unos 20 durante la noche. Por otro lado la humedad está en un 63% con lo que las condiciones son las idóneas para un crecimiento estable. Arriba os he dejado una foto y un vídeo para que comprobéis El Progreso. Buenos humos y prósperas cosechas hermanos
Likes
8
Share
Sunday, May 29, 2022 Plant #3 is stretching away by a foot over Plant #2. Both Plants looking well but displaying different leaf behaviour (particularly of the upper growth). When well watered, in full sun, Plant # 2 has perky, praying leaves that go down somewhat at night. In the same conditions, Plant #3 has droopy leaves that get even more tucked in at night. It was only from feeling the strong turgidity of the Plant #3 leaves when under good water and comparing them to Plant #2 that I accepted that it was ok and that's just how it wears its' clothes. The red and white pistils are filling out from top to bottom on all stems on Plant #2. Even though it's not as tall as its' neighbour, the six main stems on plant #2 seem proportional to, hopefully, support nice thick colas. Plant #3 is furring out much slower and though I am happy for the height, I am concerned the stems aren't thick enough to support much weight.
Likes
92
Share
D91 Still a couple of weeks to go at least. She is putting on nice long bud mass as all bud I'll get off her will have very few sugar leafs. And with the top 30cm of the nodes bent outwards it's allowed the light to reach down deeper into the plant itself, and well, you can see the results, bud sites galore. Not much left to do with her. I threw her into a heavy flush for 24hrs first flush run-off was coming back at 2900, way too high, salt and nute residue is been left behind because of the poor P-K uptake that control the spread and uptake of nutes. Got her down to 980 today with her final flush before going into her rest. After the flush I poured 100ml of 2ml/l of cal to help break down the nutes behind so the plant can uptake them, this is very important when doing a flush to lower your TDS add some cal to it as this will keep the plant sucking not only thr water and leaving the nutes behind, cause you need cal espically in subs with nute build up it has to be broken down and will help to avoid nute lock or going into an unwanted flush to early. I'll be dropping her next feed by 200ppm down to around a 1000. I will still give the nutes I've been given just a little less and she needs to get ready for a flush but be kept with enough to keep her mass of growth going. RH is between 55-60%:air been blown in is reading at 48-50% temp is 22c in tent it's 21.7c in the dark and 27-28c with the light on. With my new 4inch intake smart fan im going to set it up so it blows 100% air in at the top and a 4inch intake fan will suck out 80% I'm hoping by doing this it will change the RH of the room 48-50% into the tent creating the same environment. The air that is brought in is filtered by a carbon filter, no need for 1 to blow the air out. 19/3/22 As you can see I have the RH as best as I can get in my grow room, I've installed the smart fan and inserted the sensor giving me 57%RH 75F in the tent, with the light off, it's rather hot today, much hotter than normal, it's normally 21c in my room it's 24.5 today. RH is at 50% in room, hopefully by installing my old intake fan in the lowest part of my tent and suck out 80% While 100% gets blown in on top will bring the tents RH to the same as the room, that's the hope anyways. But 57%RH is still okay, not optimal but not too bad neither 21/3/22 So, I tried out my new method. Of having my smart intake fan suck in 50RH and a bottom intake fan at the end sucking out older air at a lesser speed had it running for 8hrs, no change in humidity whatsoever just dropped the temp by 1.5c. I think the fact I have a 70x70 with so many plants has set the RH and thankfully it's not what it was which was touching on 80rh at some days. A bigger tent and I'll really be able to dial in my grows now I have all the tools to control RH/TEMP from S/H. For now 57%RH when it's low and 62% when the lights are on for a few hours. Stays around 57-60% atm for around 85% of the time. Temp is constant and doesn't change without my control within a range of 4-6c change difference, this number I have no problem in changing and I'll be making my tent a lot cooler after this wk ends. I'll be keeping her at 18c with lights off and 28 with lights on. As for the plant, she has fully turned the corner and I can say whatever the issue was, which no 1 can still tell me what it was not do I know. It wasn't a def because it was so random and hit all different levels of growth. But, thankfully she has passed it, am really dialing in this coco grow. I know exactly how much water she takes without spilling a drop of run-off unless I want it to. The buds, well, they are small at the moment but they are so fucking dense and hard I really hope they get at least 30% bigger of the next 2 wks. The last few days some has but on at least 10% bud mass and all sites have moved out of pre-flower (stigma), so growth is over for the plant, it's just bud sites now, how you can tell is your sites will start to give off their aroma and will start to get sticky to the touch. 85% of the plants buds are all in the same range mature wise or only a few days out from their sister buds. Still some 15% that still has stigma but as this is at the bottom of the plant I know she will not grow anymore but maybe a little if any around these sites. 21/3/22 GRRRRRR stupid rust spots all over her again today, yday she got a mix of all the nutes above, one of these nutes is causing this, I am 75% sure it's overdrive. Really annoying, as there is no deficiencies, no signs, just these poxy rust spots. So annoying, as NO 1 can tell me exactly what they are, it's not a def, the plant ozzs health, she's the pic of it, every leaf stands tall, very good color, slight old nute burn very little on about 10% of the leafs but these stupid rust spots are stupid. Overdrive, or 1 of the nutes is doing this, I reckon it's this as it's only been given that the past 10 days and I'm nearly sure this is the cause, but I can't be sure, and until I figure it out I really don't feel comfortable moving forward with the AN line. Sadly I think I'll be dropping everything but big bud, bud candy&voodoo juice. 22/3/22 Was going through my buds and man, they are so sticky you would nearly say they are done until you look close at them, there still full of pistils, white hairs, the bud growth will come past them, so there is still a big push yet to come so I was hoping to start dropping the micro nutes but I think that would be a massive mistake and cost me dearly on harvest day. Fuck it, I'll flush the shit out of it for 2 weeks on flawless finish and then a week on water and 2-4 days in the dark just on water. With much thought I pushed the PPM back up to 1450. I've decided to drop overdrive. After 24hrs of flushing my coco like crazy I'll be happy to start her back on nutes in 24hrs when she's drank the 2.8-3.2l of water she's currently holding, the run-off from that was 1800 btw, but with salts and so on from the last feed I've learnt with AN the PPM reading is what you give it, not always the Run-off. Yeah I'd trust the PPM reading 2moro if i was doing another ppm run off test, but as im not ill go by what im putting into it, cause my weekly flushes/flushing in general in pretty good, very little nute lock experinces with mixing so many nutes 22/3/22 Messaged AN and sent them pics and info, by going through my nutes and the fact that I gave some big bud in the same window as overdrive causes these rust spots. Thankfully I finally have an answer as to the rust issues. Just a bad mix with nutes that shouldn't come into contact with each other. Thanks AN Thanks for reading, drop a like and I'll know u drop by and I'll do the same gottagrowsometime
Likes
34
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan) for quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
1
Share
Cut down 9/6 will hang for week or two will give me detail up dates late 9/16 branches snapping so I cut down and trimmed Not to happy with the amount but I am really happy with the quality thing is sticky frosty wish I could take better pics
Likes
23
Share
Just keeping the temps correct is always a challenge in certain indoor grow areas but a tube heater seems perfect. Fan heaters should never be used as they ruin the flavours of the final product. I used a very small fan heater in my first run (obviously not blowing at my plants) but they are too aggressive in heating the air in my opinion and results in on off operation causing fluctuations in temperature. I have purchased a cylinder ceramic heater that does the job perfectly. I know that the temperature in the tent will always be in the good zone.
Likes
17
Share
@Kirsten
Follow
26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
6
Share
@S3phwea
Follow
Noticed some fungus gnats. Added some diatomaceous earth dust to the top. Looking good. Smelling like crazy. Think I will be turning my trim and lower bud larf into hash/dry sift/bubble hash.
Likes
27
Share
@MaxMo8
Follow
11/3/ 2021 I checked the Trichomes still Crystal
Likes
71
Share
@MarcXL
Follow
At harvest day I just cut off the stem and let them dry hanging over as complete plant and will trim them afterwards. Smell is killing me, whole house is smelling like haze. Had a lot of work to separate the roots off the soil.
Likes
4
Share
@kens1
Follow
THEY ARE HUUUGE and love those ph perfect nutrients, buds are getting denser and denser.. Cant wait for the final result
Likes
12
Share
Week 3, Day 15 of Veg. Looking good and healthy so far. When they reach 6" I should have enough nodes to start LST.
Likes
2
Share
Went away for seven days had a friend come by and water the garden Absolutely exploded since I’ve seen them last very pleased with all of the plants except for mystery auto number one. It is disappointing me some but hopefully the top will bring more growth. Can’t wait to see these continued to develop!!!
Likes
8
Share
1/29/25 oh my goodness, that heavy diesel gas smell i is really coming through on the nose right now. 1/31/25 buds are starting to get heavy and leaning a bit 2/3/25 ive got spidermites again
Likes
6
Share
Day 47 or so I haven’t measured her so the height can’t be right she’s huge! And getting so heavy. Took some photos of her in the dark while I pretreated the tent for mites or any other fuckers who like to ruin the day. Just in case. Since I recycled soil it couldn’t hurt. She’s beautiful I’m so excited for her to be finished.
Processing
Likes
3
Share
It’s looking pretty good had an issue with bugs but I solved it quickly