Las nenas tomaron bien el cambio fotoperiodo se nota como ya se van preparando para lo que se viene que serán otros 2 largos meses en su fase de floración. Se comenzó a aplicar Top Bloom de Top Crop intercalando los riegos entre agua, fertilizantes y micorrizas. Seguimos ...

Recharge .5tsp/gal -1L feed Added grow dots at the beginning of grow.

Sour diesel and northern lights are ready to be chopped. I will put them in the basement in the dark for at least a day before I cut them down. The clone from the expert haze had to be tossed because I found spider mites on it and then found them on my expert haze plant outdoors. I shouldn’t have brought the clone inside, oops I will not be making another clone of this plant. I have found caterpillars all over everything and didn’t want to spray the buds with pesticides so every day a couple of times a day I would remove them. They eat a lot so I don’t have as much production at harvest. I will be more aggressive with the expert haze with pest control.

She got weak last week, so i feed her now like a coco plant, water everyday untill runoff lol and she bounces back hard, budsites everywhere. I remember i mixed the soil with a good amout of coco (i think 1/3) The feeding is 900ppm and 800comes out so shes gooood

Rookie mistake I left my lights on at 40% up until a few days ago smh... so they stretched and some fell over. So, I turned the lights up to 80% 3 days ago and 100% last night. At 22-24 inches away from the girls. I think I may have over watered as well maybe... so I haven't watered for 24 hours and gonna give it another day until I water again. Any thoughts before I start to panic?

**Encontrarás la traducción a español al final de la descripción** From/Desde: 22/03/19 || To/Hasta: 28/03/19 From day/Desde día: 29 || To day/Hasta día: 35 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- Video 1: Exactly the same video as 2 but accelerated +400% to fix it to 1 minute for instagram. Video 2: 7 days (29~35) TimeLapse, 1 image each 60 secs @ 30 fps Video 9: An overview video not as awesome as it's music 😂💪 Video 10: Myself working on the babies, lowering tops, topping & training. Video 12: Full working on the secondary Gorilla, twisting some branches, topping & training. -----WEEK SUMMARY----- Well, now i'm getting a bit scared as i adventured myself into Photoperiod, high training, full topping... in indoors at once. I feel that plants are going good, but i really don't know what am i doing, and if i'm doing well. Also i don't know how much time should i give them of vegetation stage, because i don't want to eternalize myself with this tent, so i'm planning to leave this upcoming 6th week and maybe the 7th of vegetation, but no more. Anyway they look pretty atm 😻. In video 10 the main-linning Gorilla suffered an accident as i grabbed the main left branch from a weak point and it has broken (sec 39 aprox.) so it has one less node than the right branch. -----WATERING CALENDAR----- 24/03/19 - 1.000 ml with all week nutrients @ 0.9 E.C. PH5.8 *****ESPAÑOL***** -----IMÁGENES & VÍDEOS----- Vídeo 1: TimeLapse, exactamente el mismo vídeo que el 2 pero acelerado a un poco más del 300% para ajustarlo a 1 minuto para Instagram. Vídeo 2: 7 días (29~35) TimeLapse, 1 imagen cada 60 segundos @ 30 fps. Vídeo 9: Un vídeo general no tan increíble como la música de fondo 😂💪. Video 10: Trabajando en las pequeñas, rebajando las alturas, haciendo topping y entrenando. Video 12: Trabajando a pleno en la segunda Gorilla, girando algunas ramas, haciendo toppings y entrenándola. -----SUMARIO SEMANAL----- Bueno, ahora estoy empezando a estar asustado. Me he aventurado a probar con fotodependientes, entrenamiento fuerte y super topping, todo a la vez. Siento que las plantas van bien, pero realmente no se lo que estoy haciendo ni si lo estoy haciendo bien. También tengo dudas sobre cuanto tiempo más dejarlas en estado vegetativo ya que no me quiero eternizar con este armario, por lo que estoy planeando dejar esta sexta semana de crecimiento y quizás una séptima, pero no más. Aun así y con todo, las nenas se ven preciosas 😻. En el vídeo 10 sufro un accidente en la Gorila con main-linning ya que amarré el final del tallo principal izquierdo por un punto débil y este se partió (sec 39 aprox.), por lo que tiene un piso de topping de más en comparación con tallo derecho. -----CALENDARIO DE RIEGO----- 24/03/19 - 1.000 ml con todos los nutrientes semanales @ 0.9 E.C. PH5.8

Was an awesome plant to grow and one of my favourite to this day , the smell of it is like you’re a kid again eating purple fun dip it’s unreal . He grew very odd at first but ended up taking off when it was around flowering 💯😁 the look of this girl is so eye catching and I cannot wait to try it out .

BEAST has done well this week. She is really starting to stack up the buds and the frost is already coming on strong and she already smells quite potent. I am watering with 10 gallons every 2-3 days. She is a thirsty beast!! I am willing to bet this plant will put what sweet seeds says it yields to the test!! Onward!! 😎🍿🍻🌱

A-Day 81, B&C-Day 77 A- Is already 1/2 way through week 12, she almost all cloudy, with some amber tricomes now. I have started her “flush” just water for two feeds now. I’m going to keep watch, and see when is the right time, no rushing this go around . 🌱😎💨 B- is doing great, fattening up daily. A few more weeks at least, I hope she gets as big as her sister A 😍she got a full strength dose of nutrients twice this week and a water only feed in between. PPM was close to 1000 . C- is thickening up, I have her a slight defoliation and tied her down a bit to spread her branches. She is turning into a beast 🤩she also got 2 full dose feeds, and a water in between. Just keep spinning them around to get the even coverage.

Temps are high, I will do what I can to lower them Watering is also a challenge and it’s hard to tell the difference between under and over watering Over all happy with how it has started out 👍

Lemon Cherry Cookies Auto - Best autoflowering strain 2025

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""

week intel: we reached the peak of flowering stage and need to cause a little more e.c stress from this week so e.c stress is twice a week i reduced the amount of Nitrogen and calcium and stopped feeding silicate in other hand i raised the amount of base nutrient and booster short story version: more K & P - less N stresses : a little E.C stress around 1.6 and 1.7 twice a week from this week feeding: i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 822 ppm - 1.6 e.c to cause a little stress. day 3 : i feed them low dose of Top-Max + B-52 around 525 ppm - 1 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them high dose of Feeding Booster around 850 ppm - 1.7 e.c to cause e.c stress again guide of the week : from this week we can cause more E.C stresses. e.c stress if done correctly is one of the very few ways to increase quality in all aspects ( color , aroma , taste , bud structure , resin contents ) but if you over do it , listen carefully brother : it can reduce quality in every aspect so always look for signs and never reach the red line.

261 g nass ist für die Umstände total in Ordnung. Der Schädlingsbefall hat sie in der Vegi ordentlich gestört und eigentlich sollten es ja zwei Pflanzen sein. Dazu war das Licht einfach viel zu stark eingestellt und hat sie zusätzlich gestresst. Jetzt wird erstmal getrocknet in DryFerms die ich noch da hatte. Trocken 80 g, jetzt fehlt noch das Curing. So, die Budshots sind nachgereicht. Eine Probe wurde ins Labor geschickt, ~ 20,7 % THC, ~ 24 % Cannabinoide insgesamt.

I wish I would of taken pics of them before I trimmed them up because they were a massive bush!!! At this point im satisfied with the number of potential cola's and size of the branches. I can already see preflowers coming from some of the nodes which is crazy because i've never seen any of plants in history doing this. Its also the first time i've taken veg past 3-4 weeks but mainlining does extend the veg time some. Today i've switched to 12/12 so next week will be the first update of flowering!!! quite excited to finally get to this stage.

🚀🌋🇬🇪

So this week the tent really started filling up, lots of new growth probably going to flip next week just giving the mac 1 time to root in a new 7 gallon bag as she was far too big for her 3 gal one and is definitely female 😀 I’m planning on just keeping all six at this point harvesting as plants/branches are ready. heavy defoliation is in order soon

FRIDAY 11/9: I rotated them and increased blue spectra for their 6-hour "nighttime." Added another 25w 15.0 UVB with reflector over them. Lowered all the lights about 2 inches. SATURDAY: Today was their last feeding. I went heavy with the cha ching, terpinator, bembe, and bud candy, and just a little big bloom and tiger bloom, plus calimagic. I'll let them dry out for a couple days and start flushing. SUNDAY: Rotated them and plucked some necrotic stuff. Need a close look at her trichromes, but all three of them are about ready to be flushed. Super stinky!😋 MONDAY: I took some photos and zoomed in on them with my PC..they are definitely ready for flushing. They'll be ready for a big clear drink of water tomorrow.👍 TUESDAY: Today, I douched all three remaining bloomers with a few gallons of ph'd water each and plucked some dead shit. I'm so glad this crop is almost finished! Can't wait to clean out the big tent and get it ready for the new crop. They'll start flowering any day now.. WEDNESDAY: I did nothing really except for taking a few photos and re-positioning the UVB lights a little.

Flower Week 3 / Day 2: The plants each received 2 liters of water and nutrients. I only gave them half the dose of fertilizer. They are doing wonderful. The leaves have a rich green color and are praying. Flower Week 3 / Day 5: Today I defoliated them again a little, as some parts were getting a bit too bushy. They are now quite sticky and the trichomes glisten in the light. Unfortunately, it doesn't look quite the same on the video. All of Taylor's buds develop evenly. In Beyoncé's case, one half is already well developed and the other half behaves completely differently. In any case, both are healthy. Perhaps it is also due to the genetics of the plant.

processing outside and then taking for drying in a shadowed ventilated room for about 10 days......very sticky stuff... then to jars to cure for 2 weeks. Then i vacuum seal it. - total of 1KG buds 840gram of nice fat ones + 160gram popcorn