Likes
Comments
Share
@MG2009
Follow
03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.
Likes
1
Share
@BudBeezy
Follow
Strawberry Gorilla Auto - FastBuds Welcome to week 11 of my grow diary, which is also the last week. As predicted last week, the weather has become even warmer. The heat has now completely taken over the house, and it has also rained for a few days, causing the humidity to rise again. Unfortunately, this led to mold forming on one shoot, so I decided to take action. Normally, the plant could have stayed in place for another 1-2 weeks for my needs, but I didn't want to take any risks and harvested it in week 11. Overall, I was satisfied with the growth of the plant. Environmental conditions are unpredictable in summer and more difficult to control than in winter/spring. I was able to gain more experience with this grow and now know that I should take a break in summer from now on. I really liked the mainlining. Before, I topped above node 2 and left 4 main shoots. With 2 main shoots, it is much easier to work with and does not require as much defoliation as with 4. I will definitely use this technique again in the future. Here's some initial feedback on the Strain "Strawberry Gorilla Auto" from FastBuds and the Organic Starter Kit from Advanced Nutrients: The plant grew really well and has enormous potential. The buds were so swollen towards the end that I was amazed. The organic fertilizer from Advanced Nutrients probably also had an influence. This was my very first purely organic grow, and I think I can be satisfied with the result. I can wholeheartedly recommend the fertilizer. I will definitely use it again in future projects and will probably do a comparison grow between the mineral and organic starter kits. Avg. Temperature - 27°C Avg. Humidity - 68% Avg. VPD - 1,16kPA The lamp runs at 60% which is 356w according to the energy meter. At a distance of 20cm the plant gets around 950-1100ppfd. Thank you for following me so far. I will give you an update after it has dried. I hope you enjoyed my grow diary. If you have any questions, please feel free to ask me. See you next week ✌️ Soil: Plagron Lightmix N 180 mg/L - P 210 mg/L - K 360 mg/L Fertilizer used: Advanced Nutrients - Vodoo Juice Plus Advanced Nutrients - Iguana Juice Bloom Advanced Nutrients - Big Bud Tent: AC Infinity Cloudlab 844 Exhaust air: AC Infinity Cloudline T6 incl. activated carbon filter Lamp: Kingbrite P55 / 480w, dimmable Fan: AC Infinity Cloudray S6 Gen. 2 Controller: AC Infinity Controller 69 Pro Pots: Gronest 25L PH Pen: Bluelab Onepen
Likes
6
Share
July 6th @GbaGrow Update July 11th @GbaGrow Update July 12th. I discovered a pleasant surprised right. If done correct and effectively, I maybe introducing to the cannabis community a new Haze. Two days ago on July 10th, i transplanted them into a two gallon pots into a tent.
Likes
35
Share
Hello friends we are in the final straight lines, arrived and in sight. I am very happy with my session, not too hassle I start rinsing with water. The smell I am shocked for both varieties. Have a good day take care of yourself 😘😘😘
Likes
126
Share
The little Dawg is coming on great , res change and some more nutes and it's started to open up. The difference in only 48 hours has really surprised me :) Day 3: seems like the little Dawg loves the res haha. .. doubled in width and grew 2cm in 48 hours , drank roughly 4 litres of water , poms were 350 then then dropped to 315 so it's definitely loving them nutes :) Day 4 : decided to do top my dawg and defoliate last night/this morning, came back in tonight and it's drank 2L of fluid and exploded with roots and perked right up.... I know it's it's classed as sin to top autos but i love to experiment and I've assumed if it it can grow this much in less than 21 days then then it should have enough time to heal and stretch some more before flower - well well that's my theory haha. .. All a learning curve for me :) Day 5: perked up since topping it yesterday and I'm positive i can see new leafs trying to poke through the top already so , I've applied some cablr ties to begin training it. Day 6: the little dawg seems to have took took the topping and training in its stride haha.... can see 2 new sets of leaves poking through the top, the plant stands roughly 12cm as it's topped and being trained , spans 20cm
Processing
Likes
55
Share
@PharmaZ
Follow
July 27th Day 30 - 💧Fed 1L If above program 5.8EC last top feed before turn on auto pots. _______________________ July 28th Day 31 - 💧10pm mixed up 20L in the res. Turned on autopots filled up the trays made sure everything was working. Turned off the supply of water. ——— 1am noticeable decrease in water in the trays..
Likes
14
Share
The little plant is growing without much addition.... I germinated a Gorilla Glue 4 seed in a glass of water at 21 degrees celcius for 24 hours then put it in a pot. It will keep its cousin company. If all goes well I intend at the end of the Gorilla Glue Auto harvest to change the light schedule to 12h 12h so that Gorilla Glue 4 will be in bloom. Will I have problems with the light?! We will see!
Likes
15
Share
@DRO420
Follow
Second week of Flowering and I can see some small buds forming already 😋
Likes
43
Share
Week 4 of flower and it’s been a week for the books. The males gizzed all over the females and we spent the better part of a week harvesting the males for pollen, then defoliating and spraying the pollinated females, then going full sanitize on the entire tent… (that part always sucks). Either way, they’re off to the seed making and generally showing a brilliant, yet subtle pink across most phenos. Gonna be pretty cool seeing how the colours develop on these👌. The fact that the pinks are prevalent amongst all plants is very encouraging. Still early for sure - but… potential for something special👍. Terp. Profiles are becoming quite pronounced now too. So far, we’ve got one that smells of a very sweet sorta pine in female #3 and a definitive baked berrry scent in female #1. The hope was always to balance out the earthiness of the Kush which is classic to the strain in terms of taste, just not overly tasty. Again, still early but we might’ve achieved that here on crossing🤞👌. All told and as long as we keep ‘em alive to the finish - we should have tons of seed and a well defined set of partially drilled down traits. Counting 3 discernible potential phenos so far and can’t wait to see what the clones reveal🤟. Background This project has been a year in strain selection (and another year in the actual making) to get to this point with a viable potential cross. It’ll be a true polyhybrid with a mix of sativa and indica leaning properties for each. We’ve combined an especially powerful hybrid sativa strain of Strawberry with an equally manageable and hard hitting strain of indica dominant Skywalker OG. The hope has always been to combine them and boil out the best characteristics of each. The strawberry is phenomenal in terms of terp profile and a mix of strong head and body effects while the Skywalker is a mind bending, body butter kind of indica with that earthy Kush profile and flowery undertones. The strawberry is prone to botrytis and fasciation but features excellent terps and yields if grown correctly. She’s Also stretchy and somewhat unruly when she gets going. The Skywalker is a contrast in growth characteristics with a squat structure, medium sized buds and excellent resilience and resistance. The plan is to seed out the available females and take cuts of what we can post-stretch to get a closer look at any differing phenos. Still very much early stages for a stabilized new strain but we’ve got the right foundation of solid genetics. Now we just gotta get it off the ground to the next generation👍. We’re predominantly focused on the plants that demonstrate that hybrid vigour and wasting no time with any problem plants or runts. Stay tuned - with a little luck, this cross is gonna be straight 🔥😎👌.
Likes
3
Share
Día 08 las plantas no están estirándose tanto cómo esperaba. La temperatura tampoco ayuda ya que hace mucho frío donde está el indoor. Pero tengo fé. Recién se empieza a notar el estiramiento.
Likes
6
Share
Llegamos al final, este apartado lo finalizaremos cuando probemos la yerba de momento colores rojizos y azulados, huele como a gas junto un transfondo dulce...una pasada merece la pena probarla!⛽🔥
Likes
46
Share
@Stork
Follow
Day 50 Add 7L water PH 6.3 - 5.8 EC. 1.5 - 1.3 TDS 760 - 660 DLI/20h 36 PPFD 500 Water 25.0c Day 51 Add 5L water PH 5.6 EC.1.4 - 1.2 TDS 670 - 590 DLI/20h 37 PPFD 525 Water 23.0c Day 52 Add 10L water PH 5.9 - 6.0 EC.1.3 - 1.1 TDS 650 - 550 DLI/20h 37 PPFD 525 Water 23.0c Day 53 Add 10L water PH 5.6 - 5.8 EC.1.2 - 1.0 TDS 580 - 500 DLI/20h 37 PPFD 525 Water 23.0c Day 54 Add baking soda for PH and 10L water add: revive and calcium 1L/ml PH 5.0 - 6.0 EC.1.0 - 0.9 TDS 530 - 450 DLI/20h 37 PPFD 525 Water 23.0c Day 55 Add 9L water + Nirvana + B52 1L/ml PH 6.1 - 5.9 EC.1.0 - 0.8 TDS 480 - 410 DLI/20h 34 PPFD 470 Water 23.0c Day 56 Add 20L water + 5ml Revive PH 6.0 - 6.0 EC 0.9 - 0.6 TDS 430 - 290 DLI/20h 34 PPFD 470 Water 23.0c
Likes
28
Share
If you are lonely when you are alone, then you are in bad company. Bee pollen is considered a “vitamin bomb” due to the presence of almost all vitamins with an average of 0.02–0.7% of its total content, with a higher amount of water-soluble than fat-soluble vitamins. Bee pollen contains vitamins A, D, E, B1, B2, B6, and C. It also provides minerals such as calcium, magnesium, phosphorus, potassium, zinc, copper, manganese, iron, and selenium, I mixed a bunch of that with some honey and RAW cane molasses to make a nice big bucket of tea. A family friend who is a beekeeper was kind enough to share some honey. The nutritional content of raw honey is impressive and includes high levels of protein, amino acids, B vitamins, calcium, manganese, potassium, magnesium, zinc, and iron, as well as various polyphenolic antioxidants. I am loading up nature's finest sugars, and sweet things, Honey & Mollases. UV-B-induced DNA damage (CPDs and 6–4 PPs) can be repaired efficiently by photolyases. Pyrimidine dimers can be repaired by nucleotide excision repair (NER), or bypassed by replicative polymerases (Britt 2004). The expression of the CPD photolyase (PHR) gene is induced by UV-B light dependent on UVR8 signaling pathway, and is also induced by blue and UV-A light (Li et al. 2015) https://link.springer.com/article/10.1007/s44154-022-00076-9?fromPaywallRec=true Old but gold. The camera picks up far more light than there is during the night cycle, camera is showing bright pink violet collages but my eyes barely see a thing, about 0.25ppfd in that tent overnight. Have been tweaking the spectrum of moonlight/intensity and watching the responses overnight. Tweak, tweak, tweak all week. PAR is 400-700nm, Overnight UVA in the tent is all 365nm and 385nm, so the meter only picks up a fraction of the light curve that makes it photosynthetically active past 400nm. Of the light in the tent, 0.25ppfd is from UVA Looks like It makes them 🕺 🕺 💃 all night. Better flower soon or ill be screwed for space, they are stretching, but is it "the stretch"? She has fire in her belly. Growing crops with insufficient light (i.e., below “optimal,” as defined here) limits the yield potential, which in turn wastes the other production inputs including labour, water, nutrients and electricity. As lighting fixture is one of the most expensive investment of the production, what is the relationship between light intensity and yield? Potter and Duncombe (2012) grew cannabis plants with varying canopy-level PPFDs during the flowering stage and found that increasing PPFD from 400 to 900 μmol·m−2·s−1 increased yield an average of 1.3 times higher, across seven cultivars, with no light intensity treatment effects on floral cannabinoid concentrations. Vanhove et al. (2011) found that cannabis yields were 1.3 to 3.1 times higher (depending on cultivar) when plants were grown under approximately 1000 μmol·m−2·s−1 compared to approximately 450 μmol·m−2·s−1 during the flowering stage.It was predicted that cannabis yield would exhibit a saturating response to increasing Light intensity, thereby signifying an optimum light intensity range for indoor cannabis production. However, a new research from Morrison (2021), after 81 days‘ experiment, found that When plants grew under LI ranging from 1200 to 1800 μmol·m–2·s–1 provided by light emitting diodes (LEDs), inflorescence yield increased linearly as LI increased up to 1800 μmol·m–2·s–1. "Cannabis will not stop flowering if the lights are turned on for a few minutes once or twice during the 2-month-long flowering cycle. If a light is turned on for 5 to 30 minutes—long enough to disrupt the dark period—on 3 to 5 con­secutive nights, plants will start to revert to vegetative growth." "Less than one half of one foot-candle of light (0.1ppfd) from sunlight will prevent cannabis from flow­ering. That is a little more light than is reflected by a full moon on a clear night. Well-bred indica-dominant plants will revert within three days. Sativa-dominant plants take four to five days to revert to vegetative growth. Once they start to revegetate, it can take from four to six ad­ditional weeks to induce flowering again!" Guess ill find out my answer soon.
Processing
Likes
4
Share
@Godbody
Follow
Growing Nicely.... Starting to Show Sex Fimmed plants
Likes
9
Share
She has performed very good with the lst method, nice plant, fast growth, quality flowers, it's a very good choice for everyone who's looking for a good quality strain at affordable prices. Very nice genetic, this phenotype concretely has a very sweet and floral terps. You can check the other 2 phenos of ak420 here at my page
Likes
9
Share
@PhatRobs
Follow
Huge growth! Looking super good going to be a thick one!
Likes
14
Share
@BLAZED
Follow
Week 12 (3-10 to 9-10) 3-10 Temperature: 27.5 degrees (lights on) 20 degrees (lights off) Humidity: 86% (highest) 60% (lowest) Watering: 1200 ml. PH 6.4 EC: 1.8 (with Hybrids & PK+) 4-10 Temperature: 27.3 degrees (lights on) 19.8 degrees (lights off) Humidity: 72% (highest) 55% (lowest) Watering: None. 5-10 Temperature: 25.8 degrees (lights on) 19.5 degrees (lights off) Humidity: 80% (highest) 82% (lowest) Watering: 700 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) Last night i accidentally let the light at 20% strength, so the whole day the light was on the lowest wattage. 6-10 Temperature: 28.6 degrees (lights on) 21.1 degrees (lights off) Humidity: 81% (highest) 56% (lowest) Watering: 1000 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 7-10 Watering: None. 8-10 Temperature: 27.4 degrees (lights on) 18.4 degrees (lights off) Humidity: 85% (highest) 53% (lowest) Watering: 1300 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 9-10 Temperature: 27.9 degrees (lights on) 19.4 degrees (lights off) Humidity: 80% (highest) 52% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+)
Processing
Likes
9
Share
@Hattrick
Follow
recovering from heart surgery, wanted to switch last weekend but was still in hospital. switched 0n 04/12 to flower. doing what i can when I can and with some luck all will work out