Likes
Comments
Share
A cutting requires roots to uptake water, we must create an environment so humid the plant can absorb moisture through its one set of leaves, 70+RH% but also a good supply of fresh air and full temperature control. Once I see light lime green it will signify new growth of the plant, I will know it has started to re-root.
Likes
Comments
Share
10/02/24 buds are a nice calyx structure. some purple coming in on the leaves. excited to see how she finishes 10/08/24 shes stanky and frosty. luckily the colas arent very thick due to lack of direct sunlight hecause our humidity levels are ridiculous and id have so much more of an issue with mold
Likes
28
Share
Fun week! Taking this grow a lot more serious than the first run, applying all the goodness I'm learning along the way. Had to pick up a new pH meter. Found out the one I was using is/was off by about .3% which was throwing me wildly out of pH range across my grows. Honestly surprised I didn't fry all these poor little ladies. Super pumped we caught that. Now things are exactly where you'd expect them to be...happy and healthy. I'm also running this mini fully organic as well. I'm making some FPJ from kitchen scraps now, probably start that tomorrow or the next day. Funny that the container is so small I'm watering with a syringe. 😅 Hope everyone had, and is still having an awesome week! ✌️🌱
Likes
8
Share
Loved growing in my hydro system defientley not gonna look back to coco. Stay tuned for the next to come I'll be using the pollen collected of the lemon skunk and will be crossing with chemo,blueberry,m39 grand daddy purple,gg4
Likes
10
Share
@Dunk_Junk
Follow
Not long now! Trichomes turning milky. I would think within the next week she will be harvested.
Likes
6
Share
@Philhsy
Follow
🍨 Guava Sundae Auto – Week 3 Update Week 3 is here, and Guava Sundae Auto is looking happy and healthy! 🌱 This week she received her first light feeding at around half strength, and so far the response has been very positive. The foliage remains a healthy green, new growth is coming in strong, and the plant continues to build a nice bushy structure with plenty of future bud sites developing. Growth has been steady with no signs of stress, making this an easy and enjoyable plant to grow so far. The roots are clearly getting established, and the plant is beginning to accelerate as it prepares for the upcoming stretch. Everything is on track, and I’m looking forward to seeing how the Guava Sundae genetics express themselves once flowering gets underway. For now, it’s all about maintaining stable conditions and letting her continue to thrive. 🍨 Thanks to Fast Buds for the opportunity to run these genetics. Excited to see what the next few weeks bring! 🌱
Likes
410
Share
FOR A NICE DISCOUNT ON ALL MARS HYDRO PRODUCTS. PLEASE VISIT: https://www.mars-hydro.com and use my promo code: Rocknroll This mars hydro 8x8 tent was the easiest tent I ever put together and it's huge and still super easy👍 I only had 1 foot on each side and 1 inch from the ceiling to work with and it still was so easy. It weighs alot but that's because it's made of the thickest material 1680D canvas. Tons of vent holes and ports, enough for whatever you need to put in it🤘. I jumped inside and zipped it all up and there was no light leakage👍 the zippers are strong and sturdy and you can tell that as soon as you touch them. If you have any questions about this tent or other mars hydro tents fell free to ask and I'll help you out. My honest opinion is I'll never use another brand tent after seeing this one🤘🤜🤛 Inside the tent I have my TSW2000 and my new FC4800. The tsw2000 is awesome. If you seen any of my grows you can see the results it produced. But this FC4800 is insane. It's fairly heavy and that's because it's built tough💪. It folds in half so it's easy to move around. I have it daisy chained to the tsw2000 and 1 dimmer controls both lights and that's sweet👍. Not much heat off either light and it only raised my temperature 2°C. If you have any questions about these lights, once again feel free to ask me anything and I will glad to help👍🤘 I got some friends at mars hydro so if anyone needs new equipment I CAN DEFINITELY try to hook you up with some sweet deals.. FOR NOW HERE IS A PLACE YOU CAN LOOK AT EVERYTHING THEY HAVE AT REALLY GOOD PRICES... marshydro_aliexpress Good luck to everyone and thanks for tuning in🤘🥁🎸 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hour customer service.. for everything MARS HYDRO please check out https://www.mars-hydro.com and use my PROMO CODE rocknroll for a nice discount 👍🤜🤛
Likes
10
Share
@Gram_Solo
Follow
All 3 pound cake looking good and healthy. Should be ready to transplant soon 👌👌 I have now moved the seedlings into a 3x3 tent with a 650w philzon LED light Just until late veg early flower then they are going back under the Spider Farmer for the Full MOT and Output lol Humidity has been easy to deal with luckily . I have been spraying around the solo cups and near the stem with plain water to keep it moist and Humid. Seem to be loving it so far 👌 Next step is wait til these are reaching edge of solo cup and transplant into bigger pots. Germination was success 🙌 The countdown begins!
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
2
Share
@Justrite
Follow
Repotted cookie dough sundae cuttings Tidy up veg tent and and add temp and fan control as plants were a bit neglected and had a slow week , So far they have sprung back into action with the additions and reporting . Root system was nicely developed too
Likes
16
Share
During the middle of this week I decided to stop the outward training of the branches & the allow vertical growth for beginning bud site formation . I don’t want to miss the beginning flower stretch kinda need it 😂. Decided to break the apical dominance of the main stem by LST’ing down . I noticed it was leagues ahead of the rest of the plant because it hung over the side of the pot so since I need to start slowing it’s vertical growth I figure now Is also time to get the rest of the canopy to catch up leaving me to space things accordingly later when/if necessary . Also decided to go ahead and do my 1st & last additional feeding since these girls where planted all I’ve had to do this grow was water when dry & train her to the best of my abilities. Week 6 on the GreenSceene in the books 📚 thanks for stopping by .
Likes
10
Share
@bcuzZ
Follow
I think the stretch is going to start now. All are in bloom and developing OK. Leaves are drooping a bit too much for my taste and due to the bushy growth are quite overlapping. But I'll from now just let them grow and try to do as little as possible.. Which is incredibly hard. Sometimes I just sit 10 mins staring at my girls,smelling their scent and being thankful that I don't have to fear being locked up for growing a fucking plant 😄
Likes
10
Share
@Greenbum
Follow
#1 is beginning to hermie I think, will watch to see if I can save but if it gets out of hand then chop city. Pulled off any pollen sacks I saw but they don't seem to be getting out of hand. I'm sure I'll miss a few but I'll take my chances. Temps good, ph drop was fixed and staying stable around 6.2. Flower development is good but I need to get a little more air flow. I trim about 12 (or less) leaves every 10 days. Overall goal is to achieve light penatration with 13in from the tops. Working in it over the week...
Likes
3
Share
There were problems with the grow. First I burned the leaves with self made insecticide. Then she got nitrogen poisoning. She grew rather small, but the smell was beautiful: fruity and exotic, pineapple 😊. I am very happy that she still managed to grow such nice buds. I only trimmed the fan leaves and hung the stalks with buds in the basement. I hope that humidity will stay reasonable. ATM there is 75% RH I will update the report after first smoke
Likes
1
Share
Subimos la temperatura de la sala y vaya si se noto, las plantas crecieron más en 2 semanas que en un mes, una pena no haber podido aclimatar antes la sala
Likes
3
Share
the week went we'll they grow by the day. I fed them sillica , Alaska fertilizer and molasses. there not showing many hair yet one is a little. I topped one of the plants the larger one. the gentics are top notice .i think there vigger is amazing. lots of structure should yield well
Likes
7
Share
Topped all her highest tops to keep her small and maintain a nice and even canopy, still a few weeks before i Can put Them to 12/12