Likes
Comments
Share
Lowered bloom nutrient to 16 mL per gallon and hydroplex to 4 mL per gallon. EC now 2.3
Likes
4
Share
Tuesday 29 Jan Day 94 Aphid attacks on 2 plants.. Got 3 medical 2046 and 2 kush clones for now on their way for reveg 🤞 Update: after watering them one Medical 2046 fell, then checked in the soil where it broke and.... Full of white ants they ate the whole stem! Oh Africa... Gonna have another pretaste..
Likes
1
Share
@MOTB666
Follow
Been pretty busy lately but these girls just keep at it. I did go several days with out topping them off this last week, probably only had a gallon left of water in thier buckets when I switched to transition. Only problems is a little bit of light burn and maybe a little bit of pest damage on one of them.
Likes
13
Share
@shwable
Follow
I'm switching to 18/6 now and continue to feed them small amounts of growzymes by green buzz nutrients in distilled water which I think they like. The LSD-Auto is finally starting to gain some pace and grows just as fast as the runtz muffin. I consider transplanting them at the end of the week so I hope for more good growth. Update: It's the end of day 9 and I decided to transplant. I expect faster growth now because I think the baby pots already slowed them down a little bit. Update: Day 12 and they look amazing! Now they start to grow really fast. They look healthy and I will start with training soon. If You have any tipps or experience to share please drop it down below💚
Processing
Likes
15
Share
@MG2009
Follow
09/26/2020 She is almost done, I gave her a little trim most trichomes are milky still some clear I think about a week before she is done. Hope she gets fat!
Likes
8
Share
@Froggman
Follow
The ICE is almost done; the NL doesn’t even seem close. Interesting since ICE sprouted a day later than the NL.
Likes
51
Share
@nonick123
Follow
Día 57 (16/12) CBD Auto 20:1 #1 ha empezado a bajar el consumo de agua... pero sigue creciendo! ¿Tendrá fin el stretch de esta planta? CBD Auto 20:1 #2 empieza a perder hojas por senescencia. Está a punto de cosecha!?!?!?! LSD-25 Auto está increiblemente dura y brillante. Un color morado oscuro casi negro OG Kush Auto ha bajado un poco el consumo de agua, pero empieza a formar unos cogollos monstruosos, completamente cubiertos de resina+ Día 58 (17/12) CBD Auto 20:1 #1 empieza a tocar la lampara! Vuelvo a subir la lampara.... Además presenta una ligera coloración morada en las puntas de las hojas... ¿Coloración natural o deficiencia de P? CBD Auto 20:1 #2 tiene un montón de hojas con senescencia acelerada de un dia para otro! Ha llegado el día de la cosecha! 😍💥 LSD-25 Auto sigue acercandose al final... todos los cogollos son duros como pelotas de golf 💥 OG Kush Auto estaba practicamente seca! Vuelvo a darle 1250 ml de H2O RO. Va a hacer unos cogollos brutales Día 59 (18/12) CBD Auto 20:1 #1 - empieza a mostrar coloración morada en las puntas de las hojas ¿Genetica o deficiencia? Aprovecho el riego con BIO PK 5-8 10 ml/L y darle un booster! LSD-25 Auto - se acerca la cosecha! 😍💥 Cogollos duros como piedras en todas partes y bajando el consumo de agua... OG Kush Auto - muestra más avanzada a deficiencia de hace unos dias, de modo riego con BIO PK 5-8 10 ml/L. A ver como le sienta! Día 60 (19/12) CBD Auto 20:1 #1 - sigue mostrando más deficiencia de P con alguna mancha en las hojas superiores. Menos mal que ayer la regué con el BIO PK 5-8! LSD-25 Auto - Le miro los tricomas y aún no está lista. 50% trasparentes + 50% nublados. Pero solo faltan días! OG Kush Auto - Está empezando a apilar cogollos de forma brutal, y el olor es una maravilla! Además se muestra sedienta! Eso es buena señal Día 61 (20/12) Busy time Día 62 (21/12) LSD-25 Auto - muy cerca de la cosecha. Apenas consume agua.... Día 63 (22/12) LSD-25 Auto - harvest day! Tricomas mayoría nublado y alguno ambar. Perfecta! 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/
Processing
Likes
15
Share
I tied down and defoliated twice in the week and have switched to 12-12 yesterday so they’re transitioning now and should be in bloom by week 7! I made some extract them made some gummies successfully I might add and added the photos in the diary!
Likes
44
Share
👉The time finally arrived for the harvest, mostly cloudy trichomes with scant few amber, very few white pistols, and the leaves had either faded or were fading. The run-off pH would quickly plummet and the run-off EC would spike. This may be an indicator that the plant is ready but that only would be conjecture on my part. The overall look of the plant to me said it was ready. The aroma was super strong citrusy and intoxicating. THe leaves were fading and there were virtually no white pistols. 👉I harvested bottom to top. I hung each cola on alphabetized clothes pins with gardening wire attached for hanging on the rack. The buds are dense and shaped like pine cones. I trimmed it semi-tight, but left some of the smaller frosty sugar leaves. The buds and sugar leaves are very frosty but it wasn’t as scissor freezing as the Gorrila Glue I grew last year. I measured the post trim wet weight on a self-calibrating digital scale. I checked the accuracy of the scale with a set of scale calibration weights and it was accurate at all weight ranges. I logged each colas trimmed wet weight and hung on the rack. I have a 42” tower fan. For first 12 hours I ran it at its medium setting, then reduced to lowest speed. I rotated the side facing the fan after 24hrs. Then after another 24 hrs I placed them in paper sacks with to top open. I left the buds on the clothes pin hanger and clipped the bag to that. After another 24 hours I closed the tops. Another 24 hrs and I test weighed a couple of colas. I monitored for another couple of days until the weights averaged 20-25% reduced from the initial wet weight. I then cataloged the weight of each cola and placed each into its own jar, most got one of those small cheap hygrometers. These hygrometers have been calibration tested and I know the drift of each. My target humidity is 62%. I would open the jars for brief periods of time during the next couple of days until the humidity stabilized at 62%. Once stable I placed 62% humidity packs in the jars. I took out most of the hygrometers for the next plants cure, but leave some of them with the best buds. The Queen cola was 20g when placed in the jar. That is about 24% remaining weight from trim. 24% is a little on the high side of the humidity target range. The jar the Queen cola is in, is a wide mouth counter jar and I will be toking that bud primarily and it will dry out the fastest. I have compensated the weight I entered on the dry weight spec to reflect about 20g more of humidity loss and another 30 for the stems that are left on the bigger buds. The final weight of the buds going into the jars was 254g (not including the larf at 23gdry). 200g of plump sticky pine cones for the final weight is pretty nice for a 1 gallon pot. 👉I wrote this review at 3 weeks before the 6 week cure mark. In my short experience of being weed rich, its been interesting to take note of how the flower continues to ‘cure’ as time goes on. I have found that 6 weeks isn’t a given for when its ‘cured’. I have observed that as weed ages it changes. I have not noticed much difference with 2-3 week old buds at 62% humidity when compared to 6 weeks from jarring. But I do notice significant difference around 6 months of age. The flavor is enhanced and the buzz is stronger. It maintains this level then 8-12 months it has leveled off and all strains are becoming more ‘couch lock’ inducing. My observations are not scientific by any means. This is just my 8th plant in the 2 years that cannabis became legal for home grow in my area. But I still have each of the plants and rotate which one I consume. 👉I loved growing this plant, and hopefully gained more knowledge. It fox-tailed a bit at the end. I think my frequent fertigation techniques contributed to most of the issues I had. I think I was a little too conservative with nutrient mix and irrigation volume and frequency. I used only 10% expanded clay pebbles in the coco mix as opposed to the standard 30%. This was slightly problematic at first before the roots filled the pot. Fertigation events would cause erosion and caution had to be taken around the seedling. I placed a layer of hyrdoton pebbles across the surface and the issue was solved. Once the pot was filled with roots it took 10+ minutes to give the plant 2L of solution. The pot was packed hard with roots. This may have been a contributing factor to some of the possible nutrient issues I had. I dont think the nutrient issues I saw had much impact on the final outcome. To get 200g from a 1 gallon pot is wonderful.
Likes
66
Share
@Hashy
Follow
This was my 1st photoperiod grow on growdiaries and I'm glad I tried these Fast flowering photoperiods for it. Big thanks to Heather and the Fastbuds team. The wedding cheesecake auto is one of my favourites strains and i have grown it a number of times but now having a photoperiod version is just great and to flower so fast is brilliant. Because this grow was going so good I decided to switch back to photoperiods for the next few grows i just wish i had left her in veg for 1 more week. Total decent buds dry weight for the grow=136g Light power Total= 200.43Kw 18hrs for 28 days = 504hrs 12hrs for 67 days = 804hrs Total hours for lights= 1308hrs 200.43÷1308=0.153Kw/hr average. Average 153w/hr Total g/W=0.89g/W Power used for grow=508.78Kw @0.30p =£152.63 Each gram cost £1.12 The buds have been curing for nearly 2 weeks so I haven't had a sample yet. There will be more pictures added once I try the buds and write up a smoke review in about a week but for now I'll just leave a video of the grow. Thanks to all who have viewed my diaries and a big thanks to all that posted likes and comments, it's much appreciated.
Likes
3
Share
@CheeRz
Follow
Last week the weather was really bad and it rained a lot. According to the weather forecast, it's supposed to rain a lot this week too. Let's hope for the best. ☀️☀️☀️
Processing
Likes
54
Share
@Mimi420
Follow
Hi guys! My two Kushes are growing great!I lollipoped them al litle,and started to remove the leafs and branches under the net.And I toped all the highest tops.One or two weeks of veg to go.Stay green!
Likes
53
Share
@Mz876
Follow
They’re really stretching and basically starting to flower but I’ll wait until next week to claim week one of flower.
Likes
5
Share
Start of week 3. Threw some new cover crop seeds and added an alfalfa mulch layer in prep for the flower stretch. Spotted the first pistil on day 17, she is very eager to get going. Tied the main stem down in an attempt to train her. Never got this right before but practice makes perfect, haha! Gave her a good watering of some kelp
Likes
5
Share
@Nvchods3
Follow
esta semana se le realizo lavado de raiz con 22 lt de agua. amarre dos de las plantas a una guia ya que el peso las estaba tirando hacia un costado. quda poco para la tan esperada cosecha
Processing
Likes
45
Share
@AsNoriu
Follow
Day 135. Girl stinks a hell, cant move her to smaller tent and my new fan is delayed, so is new diary. Still in doubts what to do, dont want to postpone next run deep into summer, too hot at mines ... Day 137. Girl was moved to new home, humidity was at highest 50, hope during night i wont get bud rot, have no outfan still... Day 138. Girl was fed with last nutes, from now just phed water, hope she will last 3 weeks minimum. Have a feeling that she dont like it, but got humidity in mid 40ties maybe we will make it ;) Day 140. After filter instalation i created negative presure, plus inside fan moved air and tent was too small for this girl, her walls were breathing, so one head rubed heavily, all glued to flat ;)) Had many budrot cases and they were starting from a lot smaller incident, prevention is the key, plus i want to try out that stinky beuty ;)
Likes
7
Share
Week 2 begins, not much to report other than the pro-mix HP hasn't dried out enough to warrant another feeding.
Likes
2
Share
@aquaMan
Follow
Premise was to see how "optimal" i can get my first ever Grow. After some Research i came up with the idea to build an Aeroponic System myself using Water Buckets and Venturi Injektors to provider proper aeration. Sadly Seedlings had to wait in EazyCubes cause some parts and Nutrients didnt arrive on time. System was fully operationable on Day 16. Atami Nutrients are inside the System since Day 24, Calmag has been added Day 28. Before that, some Tri-part Nutrient. Planning on switching to Plagron in the Long run, as well as adding Co2, a water chiller and a ~700W LED. Stats: - 5 30L Buckets, 4 Plants and 1 Reservoir - Recirculation happens through 90mm PVC pipes - 16000 l/h pump going through 4x 1" Venturi Injektors pulling around 700 liters of Air per hour - 1mx1mx2m Growtent - 250W The Jackson Nemesis LED Happy about any Questions and Suggestions!
Likes
5
Share
She has stretched quite s bit, really wonderful leafs and she's developing her flowrs little by little, let's see how this performs, I expect the best from gea seeds genetics.