FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

this is one week after i switched 18-6 and lower the wattagge of lights to 400 and moved them up. now my question is should i harvest half of the tent. can you guys check the video and photos. i wanna say that all plants have some still devoloping buds so im confused. at the end of the video, the tall ones, they arent ready i know but others im confused thank you for your help

This was truly great and the colours and smell the fruit smell and good size bugs

Explosión de resina!!! Una genética que no me deja de sorprender un olor brutal a cítricos y su olor a Haze un gustazo pra la vista y el paladar sin duda esperamos impacientemente el dia de degustar este manjar!! Espero que os guste Salut y força al canut Farmers!🍁

25.9 - 5l 26.9 - 5l 27.9 - 5l with fertilizer 28.9 - 5l 29.9 - 5l 30.9 - 5l 1.10 - 10l with fertilizer 2.10 - 5l without supervit & ph down

Veg for 8 weeks Dew to writing the wrong date down. lol. .which means flowering didn't start till week 10. So this only week 5 of Flower (Total weeks of grow 15) I try to let them make it to at least week 7 for flower But it will depend on Trichomes & Pistil's ---The Buds--- Denseness 7/10 Stickiness 4/10 Smell 6/10 ---Trichomes--- Clear 15% --GOAL 0% Cloudy 30% --GOAL 20% Amber 55% --GOAL 80% ---Pistil's--- White 60% --GOAL 0% Amber 40% -- GOAL 100%

Tolle ernte

3rd week of flowering started and for only 2 weeks of flowering these ladies have grown very well. I had to pull my lamps even higher which the plants definitely enjoyed. they all gained about 10cm height in less than a week. I added some CalMag to my water just prevent deficiency. I usually do it around week 9-10

El 4 de ocubre se cambia el ciclo a 12-12. El 7 de octubre se pueden apreciar en el video varias marcas de super cropping que hice tratando de controlar la altura, esta hay una planta en concreto que crece rapidisimo y con mucho vigor, después también resultará ser la más sabrosa. Digna de haber hecho madre

I have never treated my girls as poorly as I did during this session... and yet the result amazes me! in 12 weeks, despite all the mistakes i made, they gave me 121g dry; nice! 🎁

Not much to say this week so I did a few videos... B.A.C. schedule goes on : flowering week 4. Changed clones' tutors for taller ones and used them with mother plant to reshap it to fit perfectly with clones. They are still from 60 to 70 cm, mother is 65 cm : no height change since last week and I can clearly see flowers growing under pistils, stretch is officialy done.😀 03/28 : I lollipopped mother plant (maybe too gently). Clones grow faster with bigger buds and much more trichromes on sugar leaves, but mother plant keep on growing too, despite all mutilations she suffered. She may finish a few weeks after her clones... whatever, it's for fun!

Nothing to update on, still just watering when needed. Starting to think about flushing process for a few of the plants soon, As they seem to be maybe a week or so ahead of the rest. Defoliating a little just where where have leaves blocking bud sights.

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Hey guys they are both happy, didn't stretch much because I stressed her at the beginning of the week with lolipoping and some little lst together with change of nutritions but all good expecting some stretch in this week and let's see how she will go 💪

🌱: 💧 : 8l 💡 : Dli: 45 mol/m²/d 🤔: Switch to 0,4ml/l PK 13-14 on day 53

I'm not adding no nuts since I make super soil however I'm adding an extra push for her now in flower just once a week using kalong bloom and kalong batboost (extract) she seems to love it,I didn't expect her to produce this beautiful violet nugs she's developing,let's see how beautiful she gets at the end,can't wait guys! 😍👀🌱

20/03: most of the plants are very near the end - there has been an issue with two kush - severe nute burn - I have hung them up to dry before the burn killed off any of the buds - will cut later this week and add the weight to the overall harvest. 1 more week nutes - 1 week flush and 1 week to dry. The white widow colas are blooming so that the stalks are unable to hold them up - added cable ties to keep everything in place

Have some problem with unfiltered water and it just cause the water to be come unclean and the root seem to also be uncleaned and unhealthy.

Topped them end of last week, still not given them feed as the farmyard manure they were planted straight into seems to be giving them what they need so far, I've given them rain water when they needed it. Hopefully the sun will return this coming week 🌞

Everything running smoothly, buds getting bigger and trichomes production increasing. DAY 126 -Molasses PH - 5.84 PPM-914 Solution Temp - 22.4 Watering Volume - 4.1L DAY 129 - Nutes PH - 5.83 PPM- 2620 Solution Temp - 24 Watering Volume - 4L