Likes
Comments
Share
Will post more pictures and thoughts after, it’s done drying and curing
Likes
14
Share
ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
15
Share
Very happy with how both plants turned out in the end! Pheno#1 is a definite keeper, but il be hanging on to Pheno#2 for at least another run or two. Both plants have a very similar smell it’s like a tropical cherry punch, #1 smells the strongest, you only have to nudge it and then whole room stinks. #2 has a gassy edge that #1 doesn’t have. Both smell incredible! I’ve cut both plants into individual branches and I’ve hung them in my drying tent. I’ve removed all fan leaves and any lead with a visible stalk. I’ll dry them for 10-14 days, my RH stays roughly between 55-60 and the temperature fluctuates between 19-24*c weather dependent. I’d like to thank everyone who has had a look, liked or commented on this diary, I hope it’s been helpful 🙃 Big shoutout to In-House Genetics for another 🔥 strain, can’t wait to try this one! Il post an update with some bud pictures once she’s dried and curing. Catch you all soon, until next time 🌱💚
Processing
Likes
1
Share
@MUDBUG
Follow
Been busy homies but as u can see shes rolling I will pimp her ass out she has alot of potential the growth is on par with number 6 let's see where we at in 2 weeks🐈🐈🐈🐈🐈🐈🐈🌳🌳🌳🌳🌳🌳🌳So after updating I decided to see so I topped here shes like a straw that's wat you want 100% uptake 🌋🌋🌋🌋🌋🌋🔥🔥🔥🔥🔥🔥🔥
Likes
8
Share
Week 21 Daylight 12h20 - 7h45/20h05 Unstable weather, alternating heavy rain and wind quasi every days and sunny afternoons. Moderate temperatures around 14°C min / 23°C max. Plants are safe in the veranda; the sun is lower on the horizon now and the angle of the light is now perfect for a good finish. I need to test the humidity level in the room but it seems reasonable. No signs of diseases or moisture. Last weeks were hard with multiple aggressions: plants are like War Veterans with some damage and scars. The flowering process look not affected by this episode and harvest is approaching. Brake Pad Breath: almost ready. Pistils are rusty colored, buds are thick and dense, firm and sticky. Subtle fruity aroma: tonic and stimulating. Most advanced plant: will be the first harvested soon. 2L watering / 2 days flowering booster finish + water flawless finish + water Flash Back #2: ending the flowering cycle and starting maturation. Last plant infested by insects, may be the plant is reacting by accelerating the flowering: buds are not so dense compare with the previous plant. Pretty spicy smell and good resin production. flowering booster finish + water flawless finish + water GMO x Zombie Kush: starting the last flowering stage. Recovering good and was less injured by caterpillar than the others. Pistils are long and the flowers will enlarge soon: need almost 3 or 4 weeks to be ready. Grower master flo + bud XL enzyme + pk 13/14 Royal Moby is tall and late flowering but seems producing lot of flower. With the stress the plant become hermaphroditic, I discovered some bag of males flowers. I hope there is no pollination between the other plants. Grower master flo + bud XL enzyme + pk 13/14
Likes
5
Share
Out of water for 3 days and when I arrive she looks with all her leads facing down. As soon I put her water she refused but after few hours she becomes very healthy. I had to cut few yellow leeds
Likes
8
Share
@Elpicor
Follow
To get higher temperatures I placed the growbox near the radiator, dimmer still at 25%, boiled tap water also this week, this guaranteed me an ideal pp for the beginning, from now on I will use mountain water which will allow me to use less fertilizer.
Likes
24
Share
Hey everyone 😃. On 09/10/20 she was placed in the flower tent at 12/12 h 😀. You have developed incredibly well with the Green Buzz Liquid Nutrients 👍. I am very curious how it will develop in the coming week. Until then, I wish you all a good time and stay healthy 🙏🏻. You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Likes
5
Share
@Krissci
Follow
This week I have separated the plants into 2 tent, to allow for wider canopy per plant. Day 5 - LST and defoliation needed
Likes
12
Share
@THCeitor
Follow
Normalmente una planta automática ya está floreciendo en la cuarta semana, pero estas RUNTZ auto no quieren parar de crecer formando una estructura fenomenal gracias al LST.
Likes
20
Share
Ripped out the males, switching to plain water after this week!
Likes
10
Share
Las hojas mas viejas se pusieron amarillas, creo que puede haber algún problema en las raíces y/o falta de potasio. Aumenté las dosis de PK.
Likes
226
Share
Hey folks ! Back with some Royal Queen Seeds genetics, lets blow out all their potential and make some monsters plants 😉 The plan is 12 plants of 1 square meter all in personal ScrOG to harvest 12 squares meter. Light: 2 x Adjust-A-Wings Avenger 1 x 600w SuperPlant Super Red 85000 Lumens 2000K 1498nm 1 x 600w HPS Philips Son-t Green Power 95000 Lumens Soil: Platinium Royal Mix Premium Quality Oxygen+ with NPK 8-9-12 Nutrients: -SensistarBloom, 4 in 1 concentrated gel made under nanotechnology, NPK (5-12-15) + Cal Mag (2-2.5) + Oligos. -Superboost PK, P-K (5-20) S (14) perfect combination of concentrated phosphorous and potassium, which contains molasses, carbohydrates, and amino acids from the sugar cane extraction. + growth regulators, vitamins and natural plant hormones. - Diamond Sugar (3%K, 1%Mg, 4%S), active photosynthesis and promotes the formation of carbohydrates, proteins and their translocation to the fruit. -Canna Mono Mag, essential for photosynthesis. -Cellmax SuperEnzyme, improves the absorption of nutrients. - Cellmax BioLush, P-K (10-12) [Day 113] - Water pH 6.5 (Cellmax pH- Bloom) + SuperEnzyme 1ml/1l + Diamond Sugar 1ml/1l + Super Boost PK 1ml/1l + SensistarBloom 1ml/1l Total ppm: 1000ppm Bubblegum 1 , 2 [Day 115] - Water pH 6.5 (Cellmax pH- Bloom) Royal Gorilla 1 , 2 Fruit Spirit 1 , 2 Bubble Kush 2 Drain : Fruit Spirit 1: 980ppm Gorilla 1: 970ppm Gorilla 2: 1050ppm Fruit Spirit 2: 800ppm Bubble Kush 2: 960ppm [Day 117] - Water pH 6.5 (Cellmax pH- Bloom) Bubble Kush 1 Candy Kush 1 , 2 Drain : BBK 1: 880ppm Candy Kush 1: 1020ppm Candy Kush 2: 900ppm [Day 118] - Water pH 6.5 (Cellmax pH- Bloom) Bubblegum 1 , 2 Drain : BBG 1: 970ppm BBG 2: 930ppm [Day 119] Checking the buds looking for signs of mold by pulling on the sugar leaves to see if they hold tight or if they plug off because of rotted stem. No signs of bud rot on this first inspection 👍
Likes
3
Share
I was very shocked on how fast it grewand how much it produced very great strain a must for you Indica lovers very strong I went to about 80% red hairs perfect smoke a lot of cannabinoids and a lot of leftover sugar leaves great for lovers of bubble hash
Processing
Likes
13
Share
@AutoCrazy
Follow
This fine lady is really starting to add some nice colours due to some cold temps in our neck of the woods. She has a ton of trichomes development now! I am really impressed with the look of the buds. They aren’t all full of leaves which should make trimming her a pleasure. 😎 She has really been fattening up this week. I am guessing she needs another week or so to finish up. Her colouring should be quite something once she is done. 🤩 I am still having the odd spot of powdery mildew pop up but nothing too serious. I have been treating it with greencure every 3-4 days and it’s keeping it under control. I haven’t found any affecting the buds yet which is a win! This is the reason a good effective regimen of treating plants for pest and mould/mildew is an outdoor growing must!! I have yet to lose a plant to mould or peat so I swear by it. I’ve seen a bunch of my associates with some powdery mildew beast. Such a shame to see😱 Stay tuned for the final week 😎🍿
Likes
24
Share
@BunnyBud
Follow
I'm very happy with the results, I'm also about to add a dimmable sf1000 for more power. I'll soon introduce microvita topcrop to improve the soil. ==Update Sept. 25== I added a dimmable sf1000 in addition to the sf1000d, which I set to 80%. We'll see how the plants react. The 221 m3/h extractor is coming soon, adjustable. Temperatures are 27-29 degrees with 58-60% humidity. I currently have a 130 m3/h extractor.
Processing
Likes
20
Share
She looks really good I prepared the soil with 200g of seaweed powder,kalong powder and also veg pearls, I love to grow the organic way
Likes
25
Share
🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)