this is the end for this RF3 run with the Strawberry Gorilla strain! been really fun growing it but i need bigger stuff for next time 😎 i'm calling an monster grow 2.0 later this year! 😏👌 happy growing all! 😎✌️💚

Finished really fast! Not expecting a very big harvest, they needed a longer veg time, pretty small at start of flowering, didn't use massive bloom this run either Going of the last run expecting good quality. Small buds.

By nxt week males will be pulled and remaining would be transplanted to something big n start a lil feeding and training

10/6 Didn't feed enough to get any runoff this time. I'm pretty sure they are ok for now, next time I'll start with water test the runoff and feed. Had to move the lights up a bit and I'm losing leaves. That is my fault for not being proactive. But it could be the strain. Fed them a bit stronger this time I put EC was 1.2 and pH was 6.3. this all started out per 1gal but the EC was 1.4 so I cut it with another 1l2 gallon. That final EC is what matters anyway. I will discontinue the grow big after this week. Tiger bloom should have enough. We only have about 3 weeks left. So the next feeding will be the last big one, then I'll lower it, then just water. I'll feed up to the last week so they can really fatten up on those last 2 weeks. I'll let them sit in the dark for 2 days before I chop. In the same tent I'll dry them in. So that means I'll need add a scrubber to that tent so they don't stink up the neighborhood. Good thing I think about that already. I have a little 2x3x3 tent I can dry them in. 10/8 I didn't have time to do a water push and feed so I just gave each 2cups of plain water to get em through till the next day. 10/9 I pushed about 2700ml through each slowly to generate runoff. Vermiculite is not your friend with this type growing, but I have finally totally reworked the soil into an inert substrate that only holds the roots. All organic material and most likely any trave of the herd is all but gone. Again, you need to go back to the beginning to learn how I fucked all that up and made a switch from living to basic hydro in the first few weeks. It had to be done due to the use of unprocessed soil. I knew better but thought the soil was older. Anyhow... I had suspected my ex was high because I've not been able to produce runoff. In this soil mix it only starts once you approach the 3 liter mark so after 2 light feedings and due to high EC before I wanted to push some water through for peace of mind and then feed. Results: BBA EC: 1.6, pH: 6.6 BCA EC: 1.2 pH: 6.6 The BBa was always a bit higher but these #'s are exactly what I wanted. I didn't feed yet. I'm going to let them dry for 2 days and then I'll feed. I believe that when the substrate is soaked it dilutes the nutrient solution and I want to stop any chance of channeling. I'll give each about 1200 to 1800ml of solution @ EC 1.2 -1.4 probably the last good feeding. It's light still but I'm still treading lightly with the autos. 10/10 Still too wet to feed, they should be good tomorrow. 10/11 Fed each about 2400ml : Tiger bloom: 12.5ml/gal Calmag: 3ml/gal EC: 1.4, pH: 6.3 no runoff. Still having to use the AC even though it's in the 50s and 60s out. It's working ok now. The issue is the damn dehumidifier. Really heats up the damn room. I feel like it will still work even if I exhoust all that hot air into another room. It's still pulling moisture out of the air, so.... I have to try it. It literally keeps that little room in the mid to upper 70's all by itself.

Hi all, sorry for the delay, all continues to go very well, she is handling the nutrients very well wit only a very little tip burn. I increased the light a little bit, as I felt that some of the main colas on the side didn't get enough light. Next week I will probably be able to show the little veg-box I built, since the cuttings are slowly outgrowing their current home.

D64/F20 - 03/06/23 - The situation is under control now. I'm going to change water asap (maybe tonight) D65/F21 - 04/06/23 - 👉 Water changed, some hours without nutes... D66/F22 - 05/06/23 - EC 0.8 ph 7.0 D67/F23 - 06/06/23 - EC 0.8 ph 7.3 - added pH- D68/F24 - 07/06/23 - Added water and nutes EC 0.9 and pH 6.3 D69/F25 - 08/06/23 - EC 0.9 and pH 6.3 D70/F26 - 09/06/23 - Added water and Calmag, Connoisseur Bloom A-B. Added pH-. EC 1.0 and pH 5.5

What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !

Happy healthy plants, i love you my ladys. Grow Your Own!💚🍁💜🙌 Ripper seeds, limited edition, strain Sunset Sherbet x Purple Punch.💜🤩 Best limited seeds!

so far its looking healthy and bushy! did some slight bending on branches in order to get more light thru to the bottom budsites. i can’t quite pin down her terpene profile yet, i’m getting pine, citrus and possibly fuel but its not strong

I am so excited got some new fertilizer for bloom I CANT WAIT!!!

She is growing pretty well, the buds is getting bigger and no issues so far 🤞🙂

Posting this as I’m on the last few days of the 3rd week from germination Great progress, a lot of roots for such a short period but not too much plant growth, will start watering daily instead of watering every 2-3 days Topped the girls today (Day 18 from germ) and starting to do mainline on all the Bubba kush.

hello growmies! day 51 finally the pre-flowers begin to appear. I apologize for the few photos but unfortunately they really filled the box and I find it difficult. overall I have to say they look in perfect shape! I will keep you updated thanks for passing by. like and comment! good day and beautiful growth to you 🌳🌱

Day 14 After a week from the bottom feed The pots feels light again My finger was dry So i think its time for they first halve dose feed 23c, Ppm 700, ph 6,25 Gave each a dose of 100ml water Day 16 Last night I saw roots so today I transplanted Wich didn't really went as plant because something (Hopefully only soil) dropped right before I placed "Jane" into her new home :( Besides that it went okay Gave them a good dose of water Now wait till it dries and then they get their first full feed dose Day 20 This night they got they first full feed 500ml each 4ml grow A&B 4ml b52, bud candy and voodoo With a low ph to bring down the ph in soil Wich is a lil high I qeuss 22,7c 1000ppm 5,8 ph Day 21 Today we did some LST Now they lay, next up is sit and then we roll So far they are cooperating Day 22 All are now bend and secured and doing well :D Day 23 Soil was dry gave them some calmag 1ml/l each 700ml 6.10ph

Hello everyone, I've had a busy week, so this is what I have for you guys See y'all next week 🤘🤘

It smells of nothing but diesel n a very pungent Kush smell the berries nor mango scent hasn’t quite poked thru yet but it definitely smells of quality bud in the veg closet ha may need to upgrade my carbon filter. Gonna move these ladies at the end of the week. Thanks for tuning in!

D97 F50: what a week!!! I can't believe it, the plants are more and more fragrant, the flowers are bigger and bigger... I expected less than that! I started the flush with simple osmosis water, corrected with a PH of 6.1! I managed to increase the EC from 2.1 to 1.3, with about 4 liters per plant!! I was able to remove the excess water in the tank using a pump! I'm aiming for an EC between 0.1 and 0.5 for half of week 9, before letting them dry on the foot. In any case, there are fewer seeds in my flowers than I thought, I tried to remove a few seeds with tweezers, it worked for a few plants but the code red #1 didn't like it... some pieces of flowers dried a little and some trichromes matured faster!! I'm not touching anything anymore smells: Papaya Bang Bang #1: smells of exotic fruit candies, especially papaya, very deep and addictive!! a banger LA Vanilla cake #2: smell of gas with ripe fruits, very cali gelato Papaya bang bang #2: smell of exotic fruits on a very earthy background, a little og, it's not really what I was looking for but it looks interesting! I think it will be round in the mouth cherry gar see ya #4: smell of exotic fruit compotes on a very fresh background!! white runtz x Hollywood: a banger!! a very resinous runtz smell, almost rosin, with smells of lemongrass, ginger... I've never smelled that in my life!! code red #2: smell of tangy strawberry, simple, not so many smells in the background, almost a little citrus Code red #1: a banger too! a smell of strawberry syrup, cream, sugar, I can't take my nose off when I smell it B-45: smell of citrus, grapefruit, with a bug background that I love LA Vanilla Cake #1: very cali, gas, good gelato too, but without fruits no TCO for the last two weeks, or very light! I'll give you the recipe anyway in my flowering TCO, I put: - kelp hydrolysate - epsom salt - bat guano - mealworm guana - castor bean shell ash - palm ash - vermicompost - blackstrap molasses - elycitor -Yeasts Saccharomyces Cerevisiae Bottom right: LA vanilla cake #2 Bottom middle: Code red #2 Bottom left: Papaya bang bang #1 middle right: cherry gar see ya #4 clone middle: white runtz x Hollywood middle left: Papaya Bang Bang #2 Top right: Code red #1 Top middle: LA vanilla cake #1 Top left: B-45

Just starting to see the autos flower today, so the stretch is on. All topped and lst except for 2. Photo veg is on, waiting on some clones to root. Room will be filled with 3 top cultivars: 1) Pink Sugar Breath by Visions (GD growmies, top cross, check him) 2) cactus breath by Barrie Grower. Amazing cut 3) Slurricane by Inhouse. If you know you know Special appearance in a scrog net made by Peanut Butter OGKB gifted to me by Original Sensible Seeds. These are one of the very few breeders here on GD that I will sprout. Amazing every time Hope everyone has a good week, except you bots. Bots go fuck yourself

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Week 12