Bloom 42

I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

So Melon Gum finished. This was not one of my better grows. I had root rot in flowering. This really messed up what she could of done. It was a 17 week grow I still got a harvest. Thank you Pure Instinto, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Heute startet die 12.Woche,morgen geht es für 2,5 Wochen nach Thailand.. Danach wird das Licht auf 12/12 umgestellt. Musste extrem viele Blätter entfernen, schon das 2.Mal diese Woche.. Das 1m x 1m Zelt ist nun voll mit 1 Pflanze!! Hat jetzt 67 cm Höhe und 1 m Breite, boom.. Licht wurde extrem hochgestellt auf 77cm Abstand, die Purple Lemonade von Fast Buds soll einfach keine Verbrennungen bekommen. Das wird glaube ich ein Urwald wenn ich wieder zuhause bin. Der Stamm hat 8cm Durchmesser, fette Genetik Drückt mir die Daumen! Peace!

First week under the Lumatek 600 Pro set to 50% and aporox 40cm away from canopy. Day 7 applied some pruning and supercropped the few taller girls to even out the canopy. I will add a CO2 bag next week as i increase the power to avoid potential light stress.

I’m using KIS organic a soil with fermented inputs and water soluble calcium, I’m using a KNF bloom and FPJ for nitrogen, and aloe for vitamins, and humic and amino acids. NO chemical fertilizers

I truly love the dinafem team , there genetics have been great ever since I started out with this company .. Three first seeds I ever bought were from them and the buds I have grown have all been good smoke .. The growth structure is huge on this lady right now .. I will be planting her into the ground over the next week because I want her to get huge in my county backyard ... She will be a beast you watch ...

great!!! the girl gained momentum :) and started growing rapidly :) she looks healthy, maybe a little sad, due to the lack of space for roots and leaves, but I believe she will get used to it :) good luck to everyone:)

**EDIT** just an FYI... SmokieMcPot wants NOTHING to do with Seedsman!! Appreciate the response I got from them after replying to one of their spam mailers in dm... lets me know everything I need to know about their company... I'll continue to plug breeders/vendors that I feel deserve the advertising. I won't EVER plug a Seedsman bean! How time flies... Start of week 6 is it?? I feel I've put these girls a week behind, but then again I'm sure they'll bounce back just as hard as they have already. I just keep stressing these bitches out 🤣. so far have ive topped both, supercropped TF out of em (should have tied em down again too), swazz'd (to an autoflower point I guess)... what else can I do to hurt these girls feelings?? I can tell anyone that actually reads all of this I am going to drill their main right before harvest with the 48hr dark period.. Just put the net in today to keep a hold of em for now. Have another to use for when they need support. I plan on scooting this one up a bit as it stretches and branch them out some more. These branches are pretty stick like, so no more bendy bendy to those or snappy snap will occur. Day 35- nothing special that hasn't been mentioned already. Running the GHE wk 1 bloom feed at full strength (1237ppm total). Will continue to adjust strength depending on how much TDS drops in 12/24hrs. May update later with a vid to show how thick the main is. BTW I forgot to set timelapse for day 34, so the carnage and immediate aftermath won't be added to the week unfortunately. Day 36- i accidently farted while working in the closet tonight... i think i may have to burn everything in there now and start from scratch.. it was THAT bad!.. i dont think a million apologies will make up for making these girls inhale THAT, nor flush it out of their systems. damnit!! Day 37- woke up to a puddle in the catch tray!!! couldn't find it so i ripped out the net. didnt really want it in there yet, but was helping with a few branches. ended up being the silicon light protector pad in the back directing splash from the dripper next to it right out a LST hole i drilled in the bucket. easy fix.. RES change tonight. same week 1 bloom medium strength since its the same as week 2 formulation. ended up being 1327 after PH corrections. water started off 300ppm calmag and started using hydroguard again since the h2o2 did the trick a while back and we're in the clear. plants looking awesome, and have another 19 days before another major defol. uploading vid of a new system im working on as a teaser for the next grow... its far from finished... but the final product will be showcased later on. Bigger version of this waterfarm and its upgrades. Plus something a buddy wants me to try, but I'm waiting on the plated titanium mesh to show from China to finish that piece and bring it to show and tell for everyone to see. Day 38- PM RES change due to TDS drop from 1327 to 902 in 24hr. WG starting her droop letting me know. She sure does pump right after a fresh change. Must have went light on my measurements cause I ended up in the 1100's. As long as the ratio is right, that's what matters. I don't know exactly WHAT they're eating, just that they are. Adding anything could risk a lockout. Looks like WG is trying to tell me to back off on the Nitrogen?? Maybe dialing it back a bit on accident worked out for the best.. Mild defol tonight to open up those bud sites. supercropped a few more fresh stretch limbs on GC. Day 39- selective leaf plucking tonight. Bare minimum to keep things opened up. RES change later in their day, tomorrow for me. Will be lowering the nitrogen a hair since 2 or 3 of WG leaves are curled downward at the tip. Will update with the breakdown after the fact. Day 40- WG has been looking hungry since yesterday. Don't blame her cause RES is down from 1100's to mid 7's. Even with topping off with 300ppm calmag'd water around 2.5L a day now. Changed RES before they woke from their nap. Modified week 2 transition GHE "medium". Breakdown as follows: 2 gal calmag'd water - 300ppm Micro - 11.6mL Grow - 11mL Bloom - 14mL RES totals after PH corrections - 1253 @ 5.54. Day 41- WG looking hungry again... RES was already down 200 from its change not even 12hrs ago and down 1.5L. top off, PH adjust. changed RES during their night, right before "sun rise". same modified formula as yesterday. need to bump it up so EC doesnt drop as fast. GC need to pick up the pace, cause i dont want WG getting full on amber by the time GC is done. random plucks here and there to keep things kinda opened up without taking off too much ATM. few leaves on GC showing small brown spots, calmag def?? hmm.. already using 5mL per gallon to get to 300ppm.. *edit* looks like the start of a calcium deficiency. Odd, cause I'm adding 5ml/gal now as per the bottle. Raises ppm from 80 to 300. How much is too much?? Going to try 7mL per gal for a few days and see if we can nip this in the butt. As always. Thanks for stopping by to check out my current grow. If it's you're first time here, check out previous weeks for their daily updates.

Hey my friends! Overall, things are going quite well with the little lady. The summer heat has returned, bringing maximum temperatures between 26°C and 35°C over the past week, but she's handling the warmth well. The very slight signs of nutrient burn on the leaves haven't progressed at all—so everything is completely under control and looking fine. Exciting developments on the growth front: a few days ago, the pre-flowers made their appearance with those characteristic little white hairs. The stretch has definitely kicked off, and she's visibly gaining height day by day. Looking ahead to next week (entering the 2nd week of flowering), I’ll be introducing Bio PK-5-8 according to the Biotabs schedule to support her through this next phase. Staying the course and letting her do her thing!

100% germination rate.

2-24 1 gallon plain water, 6.4. She may get mad, I didn't add cal/mag. 2-25 Slightly adjusted LST, just to give a little more space. She sure is purdy 😻 Removed few leaves for light. Guy didnt mind. He had a all you can eat buffet 😂😂 3-1 1 gallon 5 ml cal/mag, 1 ml drops, 20 ml EM 1, 1.5 ml Amplify. Bubbling for 4 hrs. PH 6.4 ish Ohhh boy, she sure is gonna be happy today. 😁😁 See you next week!

📆 Semana 3 El estiramiento se va frenando y los puntos florales ya se agrupan con mayor definición en cada punta. Los pistilos se multiplican y la planta comienza a concentrar la energía en la construcción de flores. La estructura se mantiene abierta y equilibrada, con hojas sanas y turgentes, señal de buena asimilación. Sticky Finger gana presencia acompañando la formación floral sin sobrecargar, mientras la planta entra en dinámica productiva. Semana de consolidación floral. Seguimos creciendo fuerte 💪!

Wonka has bounced back will lots of energy finally it’s happy not to long left on her the fattening should start any day now The fattening has begun Found a dam spittle bug on the bottom leaf this morning poor bugger picked the wrong plant, the little blighter was higher than me. Checked Wonka over it was just the one for now and it was located on a small leaf so no damage to worry about but spring is officially a go!

The plant has continued the stretch this week and the first flowers and trichomes have appeared :) The weather is still very sunny and hot but the plant looks good!

I am continuing to tuck the plants underneath the scrog net. The plants are growing on autopilot and I have been only checking them once a day to add water to the reservoir and empty the dehumidifier bucket as needed. I am switching to flowering on Wednesday, 8/19. I raised the temperature in the grow. I was sitting around 70F and now I am closer to 77F. I also raised the humidity to the 60% range. I lowered the lights another few inches. They are now about 12 to 14 inches above the canopy on 70% strength. When I switch to veg on Wednesday, I plan to turn up the lights to 90%. I installed the UV light bars and am turning them on today at low strength for two hours a day in the middle of what will be the 12/12 cycle. The lights have been scheduled for 12/12. The lights will turn off early tonight at 8pm and will turn back on tomorrow at 8am making tonight the first night of 12 hours of darkness. I turned the lights back to 80% to better follow a DLI chart. I'm going to start recording the amount of water I am adding to the reservoir. Added 25L today, 8/21.

Raspberry Ripple Number One and Two (Flowering Plants) This week is the final week of Flower, I am noticing milky coverage on both plants and some amber trichomes as well. I gave the last watering today of distilled, dechlorinated water, with no P.H. Adjustments at 7.2 PH. I plan to harvest April 11th. Number One Pheno- The Number One Pheno is fully swollen and ripe now. The colas are densely stacked on the canopy. The foliage is quite over-faded, with some leaves being so dried out they crumble to the touch. I don't know if this is because the plant was in a bit too small of a pot or if my light was a little much these final weeks of flower. It is definitely ready for harvest! It's smells are still heavy in the raspberry candy department, with those hints of earthy leather on the back swing. Giving the number one pheno a very unique musk. The resin is greasy and plentiful! I can't wait to take this one down and trim it up to see how it looks in a jar! Number Two Pheno- The Number Two Pheno held out a little longer in its 5 gallon pot, it's a bit smaller of a plant. It's about 65% faded now but it's trichomes look finished! It's trichomes are very stacked out and coat this plant in a snow film! It may look a little boring next to its sister color wise, but it still sports some purple and pink hues under all the frost and I still think it'll be a worthy smoke as well! It smells of a raspberry wine but with that hazy fruity power. Almost like a strong mimosa strain. Clones- The larger clones in the 55 inch 2x2 MarsHydro veg tent, were starting to drink through water quickly! Mostly the larger number one phenos. Which would consume the entire dryback of their full pots in one day. I transplanted all the plants in the 55 inch tent into square pots (2 gallons for the Number 2 Phenos, 3 gallons for the Number 1 Phenos) this should hold them over for 3 to 4 weeks, so I can harvest and dry my flowering plants. I was unable to transplant the clones in the smaller Mars Hydro 30 inch Clone Tent, due to space constraints. I'll be feeding them worm castings and Down to Earth Crab Meal tomorrow. All the clones are looking healthy and look like they would be great candidates for flowering or mother plants. Tech Upgrade- This week I was able to purchase a Photobio Phantom Par Meter at a local grow shop's going out of business sale. With this tool I'll be able to get a dead on map of my light intensity and adjust accordingly. This will be great to have when setting up my new HLG Blackbird next cycle. I also got some 15 gallon grass roots fabric pots to try in the flower room next cycle. I also reached out to AC infinity and have an upgraded Cloudray S6 Gen 2 Oscillating Clip Fan on the way. My Gen 1 fan broke and would no longer oscillate correctly. AC infinity replaced it free of charge with the latest model. I think that about sums up this week! I'm very excited to take these plants down and begin preparing for next cycle. I was extremely lucky to get such amazing results of my first Pheno hunt. I can't thank Mosca Seeds and Tiki Madman enough for selecting such great crosses. It's hard to believe I got these two seeds as a freebie pack, with another order. I'm super thankful to have Grow Diaries to use and rely on for charting my week to week data, questions I have, and comparing my findings and results to other growers with similar strains, like @THCpapa grow of Raspberry Boogie! Thank you for checking out this week's entry of my growdiaries! See you for the harvest! -Starfish

Sweet manderain taking g it's sweet time to finish haha on week 9 witb this girl week 7 for the others and week 3 for the smallest ones doing some defoliation