Likes
18
Share
Did first nutrient feeding w fox farms nutes. Very little. Things were going perfect then I woke up this am to slight curling again. I changed light distance and put in my other light as well so I’m now in need of ac unit or another fan bc it’s getting hotter, 85. Or I figure I could run my exhaust fan 24/7 and take it off my humidity switch but then I got to possibly get another humidifier bc the exhaust fan takes the humidity out of the room. Idk but the girls all in all are looking good to me. started lst on 6/30 using grow big and big bloom now
Likes
8
Share
@Fuzzel
Follow
#3 getting harvested soon. Deofliated sixty-some leaves from green to yellow and then went into the dark for 48h. #2 is still gonna take a few weeks, Lots of nutes to slow down yellowing of the leaves. She will probably end up quite fluffy
Likes
28
Share
@Kirsten
Follow
Blackberry Moonrocks is building some nuggets! There isn't too much to report this week, actually. I'm keeping her hydrated. The lighting could certainly be better, but it is what it is. The plants just were totally different sizes, so this next run, plants are planted around the same time due to this issue. The newest run I am implementing is a SOG again, as that worked best. Here is what I did this week. 4.9.25: I watered with 3L of dechlorinated water PH'd to 6.4 with; 💜 2ml Trace PH: 6.4 PPM: 361 9.9.25: I watered with 3.25L of dechlorinated water PH'd to 6.3 with; 💜 6ml Flourish 💜 1 TSP Sea K(elp) 💜 .5 TSP Bud Explosion PH: 6.3 PPM: 970 Thank you for stopping by this week and hanging out in the comments 😁💚✌️😊🧡
Likes
7
Share
@GizaWRZ
Follow
O.Sherbert its have better structure of buds and better smell, high its diffrent then white widow but very positive 👍 O.S > W.W
Likes
3
Share
@tterpy
Follow
Week 2 of flower ?
Processing
Likes
27
Share
@BudXs
Follow
Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430
Likes
13
Share
@Lfuego22
Follow
Translation from veg to flower Day 16-24 including a small defoliation (dont defoliate in flower) Day 18. Good stretch Ppm 1190 Water temp 73° Room temp 73.2° Room humidity 53% Under light temp 76.5° Under light humidity 48%
Likes
1
Share
@Ninjabuds
Follow
BeLeaf is having a massive 50% OFF sale on all seeds across our entire website — starting today! Whether you're stocking up for the season or trying something new, this is the perfect time to grab our premium genetics at an unbeatable price. Use code Hello2026 at checkout! ✔️ 50% OFF all seeds ✔️ Limited-time sale ✔️ Available while supplies last ✔️ Fast, discreet shipping If you’ve been waiting for the right moment, this is it. Visit our shop and take advantage of the sale before it ends: 🌿 Shop Now: www.boomfiya.com
Likes
13
Share
@Lvnsource
Follow
[Feed log] D: 89 - 10L - Si,[0ml],Vega[6ml],Flores [20ml],INPUT; [1.276 EC],[6.1 pH],Ca/Mg[4.8g & 2.8g]- RUNOFF; 3.5L pH [6.3] ,[2.070 EC] Previous irrigation: D85 EC is starting to come down 👍 should help the girl drink better; still looking to lower the EC further
Likes
53
Share
@Chucky324
Follow
Hello. This is the test harvest for Lemnesia Northern. I'm happy with my first cross. It's not really strong but it strong enough for the first cross. Something I can build on to make better and stronger with future crosses. These plants were mold and pest resistant. I had mold and pest in the garden 20 feet away but none in here.😃 Plant #1 Wet Weight - 2062 g Dry Weight - 339 g Seeded buds - 26 g crossed with male Kosher Haze #3 Seeds - 10.5 g Plant #2 Wet Weight - 2364 g Dry Weight - 342 g Seeded buds - 14 g Seeds - 5 g Plant #3 Wet Weight - 2153 g Dry Weight - 305 g Seeded buds - 23.5 g Seeds - 5 g Plant #4 Wet Weight - 2531 g Dry Weight - 374 g Seeded buds - 24 g Seeds - 2 g I'm guessing the THC at about 16% to 20%, it can get me pretty stoned. The taste and smell is lemon/citrus with some hashy notes. Plant #3 has a sort of tuna smell to it. Umme, the plant that grew in the middle, also did well, and had her own diary. Next year I have Buford OG, 12 regular seeds by Rare Dankness to make more seeds with. I'm thinking of crossing this with my Dos Si Dos #33 and Sweet Zenzation and of course with the new Lemnesia Kosher. Oh Boy- Building a seed bank. 😁 Yes I'm happy everything went well and I got the harvest in and I got seeds to play with. OK time to catch up with my smoking. Thanks. Chuck.
Likes
12
Share
Week 8, and my custom fit SCROG has been installed! ❤️ At Day 50 I separated my 7 gallon girls and my 5 gallon girl. Once done, I began the very easy process of adding my “floating” SCROG. I use ratchet straps, just like the ones that come with lights to secure the four corners of the screen to the top of my tent. This allows me to adjust the screen height as necessary when 1) first installing and 2) once the full stretch of flower has occurred, I can tweak it a bit to balance the canopy as best as possible. It’s not 100%, I still get some over achievers, but I find it useful as another option. I like to do a major defoliation before I set the ladies in. Typically till this time, I have done almost no defoliation, just LST and some HST techniques. I adjusted the ladies placement to allow growth out all sides of the screen, set the screen height and began tucking and bending. The defoliation and bending allows light to penetrate all those side shoots that would have amounted to nothing, and they become top shoots as they grow up and form an even canopy. I don’t like to weave, it can damage the new shoots and cause growth problems, but the goal is to get as even a coverage as you can while allowing for plant growth in all directions. Once complete, I will give the girls about a week to recover and grow those new shoots. I like to have about 80% coverage of the screen, before I change my light cycles to flower 12/12… and if they are healthy and strong. I’ll decide this weekend if it is time ❤️👊🇨🇦😎 Happy Gardening!
Likes
28
Share
@Suemchen
Follow
What a nice strain: she smells exactly the Same as Last Time 🤗 i'm impressed Day 106: Harvest Cut her today and wet trimmed her: Put the buds in dry ferm bags. I'll Check in her in a week 👌🏻
Likes
19
Share
Day 21 of flower & things are looking good. This weeks been filled with just watering and defoliating. I trimmed off most of the bottom leaves that weren’t getting any light/wasting nutrients. I didn’t do much though because they’re so pretty & I don’t want to take away from their natural beauty. I love these girls. They’ve been super chill & easy to work with. I’m looking forward to seeing how much they grow this next week.
Processing
Likes
15
Share
Likes
17
Share
@Mroizo
Follow
Start of week 5. It looks good to me, healthy but I thought it would stretch a little more. At the beginning of this adventure I had problems with fungus gnats, which I thought had already been resolved but it isn't, there aren't many of them and they aren't harming the plant, at least for now.
Likes
13
Share
@NSABND
Follow
Let´s start Day 43 😎 some sun and cloudy with rain again 😳 Day44 cloudy and rain and cold 😡 Day45 rain and cloudy 😡 temp 16C/60F .. WTF it´s summer 😡😖😱 Day46 no rain litle bit sun and cloudy 22C/71F still not a real summer 😩
Processing
Likes
2
Share
Lollipopped the monster crop clones in the tent; defoliated everything a bit. Everyone seems to be moving alone nicely. Everything is showing pistils except the two bagseeds in the middle of the tent. Smells great in the closet. Between the two tents I have a 2x7’ area with three Sunraise lights running. I’m hoping to have a better harvest than last time. Last grow I only used the 2x4 tent with three plants and two lights yielded about 2 ounces per plant. I nute burned the hell out of them last time and I’ve been feeding about 1/4 the amount I was last grow. These plants seem much healthier and are much larger than my last grow. I have also become more comfortable with defoliation than I was previously. This time I am focusing on larger, denser buds. The plant in the solo cup is a Pineapple Express clone. It has not rooted but the stalk has turned white and it hasn’t been needing much humidity anymore. It is almost rooted; I have been spraying it with colloidal silver to try and Hermie it. If I can get it to Hermie I can separate it before the pollen sacs burst and selectively breed branches on my other plants to make feminized seeds. **growdairies is messing up; I cannot change the temperatures on substrate, night air or day air. Average temp for all is about 75 degrees Fahrenheit.
Likes
5
Share
@rkomaaa
Follow
It's been an exciting journey training my plants, and I'm happy with the progress they've made. I've been implementing various training techniques to encourage healthy growth and maximize yields. The plants have responded positively to the training, and I'm hopeful that they will continue to thrive and develop as planned. Fingers crossed for a successful outcome!